main
History Download
Ray Initial commit: component/tlc59282dbqr a25ad46

TLC59282DBQR

Texas Instruments · LED Drivers · SSOP-24-150mil

TLC59282DBQR from Texas Instruments, in a SSOP-24-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Power ground; connects to system ground for circuit reference.
2 SIN input Serial data input with Schmitt buffer; logic high writes '1' to 16-bit shift register LSB on SCLK rising edge.
3 SCLK input Serial data shift clock with Schmitt buffer; shifts all shift register data toward MSB on each rising edge.
4 LAT input Level-triggered latch with Schmitt buffer; transfers shift register to output latch when high, holds latch data when low, 500 kΩ (typ) internal pull-down to GND.
5 OUT0 output Constant-current sink output channel 0; can be tied together with other channels or operated independently at load voltage 0V to +17V.
6 OUT1 output Constant-current sink output channel 1; can be tied together with other channels or operated independently at load voltage 0V to +17V.
7 OUT2 output Constant-current sink output channel 2; can be tied together with other channels or operated independently at load voltage 0V to +17V.
8 OUT3 output Constant-current sink output channel 3; can be tied together with other channels or operated independently at load voltage 0V to +17V.
9 OUT4 output Constant-current sink output channel 4; can be tied together with other channels or operated independently at load voltage 0V to +17V.
10 OUT5 output Constant-current sink output channel 5; can be tied together with other channels or operated independently at load voltage 0V to +17V.
11 OUT6 output Constant-current sink output channel 6; can be tied together with other channels or operated independently at load voltage 0V to +17V.
12 OUT7 output Constant-current sink output channel 7; can be tied together with other channels or operated independently at load voltage 0V to +17V.
13 OUT8 output Constant-current sink output channel 8; can be tied together with other channels or operated independently at load voltage 0V to +17V.
14 OUT9 output Constant-current sink output channel 9; can be tied together with other channels or operated independently at load voltage 0V to +17V.
15 OUT10 output Constant-current sink output channel 10; can be tied together with other channels or operated independently at load voltage 0V to +17V.
16 OUT11 output Constant-current sink output channel 11; can be tied together with other channels or operated independently at load voltage 0V to +17V.
17 OUT12 output Constant-current sink output channel 12; can be tied together with other channels or operated independently at load voltage 0V to +17V.
18 OUT13 output Constant-current sink output channel 13; can be tied together with other channels or operated independently at load voltage 0V to +17V.
19 OUT14 output Constant-current sink output channel 14; can be tied together with other channels or operated independently at load voltage 0V to +17V.
20 OUT15 output Constant-current sink output channel 15; can be tied together with other channels or operated independently at load voltage 0V to +17V.
21 BLANK input Blanking input with Schmitt buffer; forces all outputs OFF when high, enables output control by latch data when low, 500 kΩ (typ) internal pull-up to VCC.
22 SOUT output Serial data output connected to 16-bit shift register MSB; data changes on SCLK rising edge.
23 IREF bidirectional Constant-current reference input/output; connect external resistor from this pin to GND to set sink current from 2 mA to 45 mA.
24 VCC power_in Power supply voltage input; requires 3V to 5.5V for normal operation.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SSOP-24-150mil
Category LED Drivers
Pins 24

CAD (KiCad official)

  • Symbol: TLC59282DBQR
  • Footprint: Package_SO:SSOP-24_5.3x8.2mm_P0.65mm
  • 3D model: SSOP-24-150mil (KiCad packages3D, STEP)
  • 3D model files: tlc59282dbqr-etched.step / tlc59282dbqr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlc59282dbqr.step / tlc59282dbqr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (26 pp, sha256 2f1cb6811512e623, retrieved 2026-09-24, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF