← Commit history

Initial commit: component/tlc5916ipwr

Ray ·29c28d3bea ·
2 files changed +241
README.mdadded+52
@@ -0,0 +1,52 @@+# TLC5916IPWR++**Texas Instruments** · LED Drivers · TSSOP-16++TLC5916IPWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | GND | power_in | Ground reference for control logic and current sink output stages. |+| 2 | SDI | input | Serial data input to the 8-bit shift register. |+| 3 | CLK | input | Clock input for serial data shift on rising edge; maximum frequency 30 MHz. |+| 4 | LE(ED1) | input | Data strobe input that latches serial data on negative edge; also controls mode selection; internal pulldown to GND. |+| 5 | OUT0 | output | Constant-current sink output supporting 3 mA to 120 mA with output voltage 0.6 V to 20 V. |+| 6 | OUT1 | output | Constant-current sink output supporting 3 mA to 120 mA with output voltage 0.6 V to 20 V. |+| 7 | OUT2 | output | Constant-current sink output supporting 3 mA to 120 mA with output voltage 0.6 V to 20 V. |+| 8 | OUT3 | output | Constant-current sink output supporting 3 mA to 120 mA with output voltage 0.6 V to 20 V. |+| 9 | OUT4 | output | Constant-current sink output supporting 3 mA to 120 mA with output voltage 0.6 V to 20 V. |+| 10 | OUT5 | output | Constant-current sink output supporting 3 mA to 120 mA with output voltage 0.6 V to 20 V. |+| 11 | OUT6 | output | Constant-current sink output supporting 3 mA to 120 mA with output voltage 0.6 V to 20 V. |+| 12 | OUT7 | output | Constant-current sink output supporting 3 mA to 120 mA with output voltage 0.6 V to 20 V. |+| 13 | OE(ED2) | input | Output enable input (active low) that enables output drivers and error detection; high blanks all outputs; internal pullup to VDD. |+| 14 | SDO | output | Serial data output from 8-bit shift register for cascading to next device or readback to microcontroller. |+| 15 | R-EXT | input | External resistor connection point; connect to GND to set output current from 3 mA to 120 mA per channel. |+| 16 | VDD | power_in | Positive power supply with operating range 3.0 V to 5.5 V and maximum supply current 960 mA. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-16 |+| Category | LED Drivers |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `TLC5916IPWR`+- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`+- 3D model: TSSOP-16 (KiCad packages3D, STEP)+- 3D model files: `tlc5916ipwr-etched.step` / `tlc5916ipwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tlc5916ipwr.step` / `tlc5916ipwr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tlc5916) (40 pp, sha256 `f257e916f7b5d37b`, retrieved 2026-09-23, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tlc5916ipwr-datasheet.pdf)
page.jsonadded+189
@@ -0,0 +1,189 @@+{+  "slug": "tlc5916ipwr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments LED Drivers, TSSOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "led drivers",+    "tlc5916ipwr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tlc5916ipwr.kicad_sym",+    "tlc5916ipwr.kicad_mod",+    "tlc5916ipwr.glb",+    "tlc5916ipwr.step",+    "tlc5916ipwr.lbr",+    "docs/hero.png",+    "docs/tlc5916ipwr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "TLC5916IPWR",+    "manufacturer": "Texas Instruments",+    "package": "TSSOP-16",+    "pin_count": 16,+    "category": "LED Drivers",+    "subcategory": "LED Drivers",+    "datasheet": "https://www.ti.com/cn/lit/gpn/tlc5916",+    "parts": {+      "symbol": "tlc5916ipwr.kicad_sym",+      "footprint": "tlc5916ipwr.kicad_mod",+      "model_3d": "tlc5916ipwr-etched.glb",+      "model_3d_plain": "tlc5916ipwr.glb",+      "model_3d_step": "tlc5916ipwr-etched.step",+      "model_3d_step_plain": "tlc5916ipwr.step",+      "lbr": "tlc5916ipwr.lbr"+    },+    "distributor_links": {+      "lcsc": "C193571"+    },+    "pins": [+      {+        "number": "1",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference for control logic and current sink output stages."+      },+      {+        "number": "2",+        "name": "SDI",+        "type": "input",+        "description": "Serial data input to the 8-bit shift register."+      },+      {+        "number": "3",+        "name": "CLK",+        "type": "input",+        "description": "Clock input for serial data shift on rising edge; maximum frequency 30 MHz."+      },+      {+        "number": "4",+        "name": "LE(ED1)",+        "type": "input",+        "description": "Data strobe input that latches serial data on negative edge; also controls mode selection; internal pulldown to GND."+      },+      {+        "number": "5",+        "name": "OUT0",+        "type": "output",+        "description": "Constant-current sink output supporting 3 mA to 120 mA with output voltage 0.6 V to 20 V."+      },+      {+        "number": "6",+        "name": "OUT1",+        "type": "output",+        "description": "Constant-current sink output supporting 3 mA to 120 mA with output voltage 0.6 V to 20 V."+      },+      {+        "number": "7",+        "name": "OUT2",+        "type": "output",+        "description": "Constant-current sink output supporting 3 mA to 120 mA with output voltage 0.6 V to 20 V."+      },+      {+        "number": "8",+        "name": "OUT3",+        "type": "output",+        "description": "Constant-current sink output supporting 3 mA to 120 mA with output voltage 0.6 V to 20 V."+      },+      {+        "number": "9",+        "name": "OUT4",+        "type": "output",+        "description": "Constant-current sink output supporting 3 mA to 120 mA with output voltage 0.6 V to 20 V."+      },+      {+        "number": "10",+        "name": "OUT5",+        "type": "output",+        "description": "Constant-current sink output supporting 3 mA to 120 mA with output voltage 0.6 V to 20 V."+      },+      {+        "number": "11",+        "name": "OUT6",+        "type": "output",+        "description": "Constant-current sink output supporting 3 mA to 120 mA with output voltage 0.6 V to 20 V."+      },+      {+        "number": "12",+        "name": "OUT7",+        "type": "output",+        "description": "Constant-current sink output supporting 3 mA to 120 mA with output voltage 0.6 V to 20 V."+      },+      {+        "number": "13",+        "name": "OE(ED2)",+        "type": "input",+        "description": "Output enable input (active low) that enables output drivers and error detection; high blanks all outputs; internal pullup to VDD."+      },+      {+        "number": "14",+        "name": "SDO",+        "type": "output",+        "description": "Serial data output from 8-bit shift register for cascading to next device or readback to microcontroller."+      },+      {+        "number": "15",+        "name": "R-EXT",+        "type": "input",+        "description": "External resistor connection point; connect to GND to set output current from 3 mA to 120 mA per channel."+      },+      {+        "number": "16",+        "name": "VDD",+        "type": "power_in",+        "description": "Positive power supply with operating range 3.0 V to 5.5 V and maximum supply current 960 mA."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 40,+        "cost_usd": 0.3454,+        "at": "2026-09-23T07:48:09"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/tlc5916",+        "pages": 40,+        "sha256": "f257e916f7b5d37b",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 16,+        "described": 16,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file