component
TLC5916IPWR
Public Made by Adomby adom
Texas Instruments LED Drivers, TSSOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTLC5916IPWR
Texas Instruments · LED Drivers · TSSOP-16
TLC5916IPWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference for control logic and current sink output stages. |
| 2 | SDI | input | Serial data input to the 8-bit shift register. |
| 3 | CLK | input | Clock input for serial data shift on rising edge; maximum frequency 30 MHz. |
| 4 | LE(ED1) | input | Data strobe input that latches serial data on negative edge; also controls mode selection; internal pulldown to GND. |
| 5 | OUT0 | output | Constant-current sink output supporting 3 mA to 120 mA with output voltage 0.6 V to 20 V. |
| 6 | OUT1 | output | Constant-current sink output supporting 3 mA to 120 mA with output voltage 0.6 V to 20 V. |
| 7 | OUT2 | output | Constant-current sink output supporting 3 mA to 120 mA with output voltage 0.6 V to 20 V. |
| 8 | OUT3 | output | Constant-current sink output supporting 3 mA to 120 mA with output voltage 0.6 V to 20 V. |
| 9 | OUT4 | output | Constant-current sink output supporting 3 mA to 120 mA with output voltage 0.6 V to 20 V. |
| 10 | OUT5 | output | Constant-current sink output supporting 3 mA to 120 mA with output voltage 0.6 V to 20 V. |
| 11 | OUT6 | output | Constant-current sink output supporting 3 mA to 120 mA with output voltage 0.6 V to 20 V. |
| 12 | OUT7 | output | Constant-current sink output supporting 3 mA to 120 mA with output voltage 0.6 V to 20 V. |
| 13 | OE(ED2) | input | Output enable input (active low) that enables output drivers and error detection; high blanks all outputs; internal pullup to VDD. |
| 14 | SDO | output | Serial data output from 8-bit shift register for cascading to next device or readback to microcontroller. |
| 15 | R-EXT | input | External resistor connection point; connect to GND to set output current from 3 mA to 120 mA per channel. |
| 16 | VDD | power_in | Positive power supply with operating range 3.0 V to 5.5 V and maximum supply current 960 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-16 |
| Category | LED Drivers |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
TLC5916IPWR - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
tlc5916ipwr-etched.step/tlc5916ipwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlc5916ipwr.step/tlc5916ipwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (40 pp, sha256
f257e916f7b5d37b, retrieved 2026-09-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).