main
History Download
Ray Publish 0.1.0 1f85937

TLC5916ID

Texas Instruments · LED Drivers · SOIC-16

TLC5916ID from Texas Instruments, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground for control logic and current sink.
2 SDI input Serial-data input to the shift register; VIH is 0.7 × VDD minimum and VIL is 0.3 × VDD maximum.
3 CLK input Clock input for data shift on the rising edge, with Schmitt-trigger input and 30 MHz maximum clock frequency in cascade operation.
4 LE(ED1) input Data strobe: serial data is latched to the output latch while LE is high and held when it goes low; it also serves as the control input for Error Detection and Current Adjust modes, and has an internal 500 kΩ pulldown.
5 OUT0 output Constant-current sink output, adjustable from 3 mA to 120 mA per channel via R-EXT, with a maximum output voltage of 20 V.
6 OUT1 output Constant-current sink output, adjustable from 3 mA to 120 mA per channel via R-EXT, with a maximum output voltage of 20 V.
7 OUT2 output Constant-current sink output, adjustable from 3 mA to 120 mA per channel via R-EXT, with a maximum output voltage of 20 V.
8 OUT3 output Constant-current sink output, adjustable from 3 mA to 120 mA per channel via R-EXT, with a maximum output voltage of 20 V.
9 OUT4 output Constant-current sink output, adjustable from 3 mA to 120 mA per channel via R-EXT, with a maximum output voltage of 20 V.
10 OUT5 output Constant-current sink output, adjustable from 3 mA to 120 mA per channel via R-EXT, with a maximum output voltage of 20 V.
11 OUT6 output Constant-current sink output, adjustable from 3 mA to 120 mA per channel via R-EXT, with a maximum output voltage of 20 V.
12 OUT7 output Constant-current sink output, adjustable from 3 mA to 120 mA per channel via R-EXT, with a maximum output voltage of 20 V.
13 OE(ED2) input Output enable: when low the output drivers are enabled and when high all outputs are turned off (blanked); it also serves as the control input for Error Detection and Current Adjust modes, and has an internal 500 kΩ pullup.
14 SDO output Serial-data output to the SDI of the next driver IC or to the microcontroller; VOH is at least VDD − 0.4 V at IOL = −1 mA and VOL is at most 0.4 V at IOH = 1 mA.
15 R-EXT input External resistor connection to ground that sets the output current for all channels.
16 VDD power_in Supply voltage, 3 V minimum to 5.5 V maximum (absolute maximum 7 V).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-16
Category LED Drivers
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VDD Supply voltage VDD 0 7 V 4
Input voltage VI -0.4 V 4
Output voltage VO -0.5 20 V 4
Clock frequency fclk 25 MHz 4
Output current IOUT 120 mA 4
GND terminal current IGND 960 mA 4
Operating free-air temperature TA -40 125 °C 4
Operating junction temperature TJ -40 150 °C 4
Storage temperature Tstg -55 150 °C 4
Supply voltage VDD 3 5.5 V 4
Supply voltage to output pins OUT0-OUT7 VO 20 V 4
Output current IO 3 mA VO ≥ 0.6 V; DC test circuit 4
Output current IO 120 mA VO ≥ 1 V; DC test circuit 4
High-level output current, source IOH -1 mA SDO shorted to GND 4
Low-level output current, sink IOL 1 mA SDO shorted to VCC 4
Input voltage (VDD = 3 V table) VDD 3 5.5 V VDD = 3 V, TJ = -40°C to 125°C 5
Supply voltage to the output pins (VDD = 3 V table) VO 20 V VDD = 3 V, TJ = -40°C to 125°C 5
Output current (VDD = 3 V table) IO 3 mA VDD = 3 V, TJ = -40°C to 125°C; VO ≥ 0.6 V 5
Output current (VDD = 3 V table) IO 120 mA VDD = 3 V, TJ = -40°C to 125°C; VO ≥ 1 V 5
High-level output current, source (VDD = 3 V table) IOH -1 mA VDD = 3 V, TJ = -40°C to 125°C 5
Low-level output current, sink (VDD = 3 V table) IOL 1 mA VDD = 3 V, TJ = -40°C to 125°C 5
Low-level output voltage, SDO (VDD = 3 V table) VOL 0.4 V VDD = 3 V, TJ = -40°C to 125°C; SDO, IOH = 1 mA 5
Output leakage current, TJ = 25°C (VDD = 3 V table) Ileak 0.5 μA VDD = 3 V, TJ = -40°C to 125°C; VOH = 17 V, TJ = 25°C 5
Output leakage current, TJ = 125°C (VDD = 3 V table) Ileak 2 μA VDD = 3 V, TJ = -40°C to 125°C; VOH = 17 V, TJ = 125°C 5
Output current error, die-die (VDD = 3 V table) IO(1) -6 3 6 % VDD = 3 V, TJ = -40°C to 125°C; IOL = 26 mA, VO = 0.6 V, Rext = 720 Ω, TJ = 25°C 5
Output current skew, channel-to-channel (VDD = 3 V table) -3 1.5 3 % VDD = 3 V, TJ = -40°C to 125°C; IOL = 26 mA, VO = 0.6 V, Rext = 720 Ω, TJ = 25°C 5
Output current error, die-die (VDD = 3 V table) IO(2) -6 2 6 % VDD = 3 V, TJ = -40°C to 125°C; IOL = 52 mA, VO = 0.8 V, Rext = 360 Ω, TJ = 25°C 5
IOUT vs output voltage regulation (VDD = 3 V table) IOUT -0.1 0.1 %/V VDD = 3 V, TJ = -40°C to 125°C; VO = 1 V to 3 V, IO = 26 mA 5
IOUT vs supply voltage regulation (VDD = 3 V table) IOUT -1 1 %/V VDD = 3 V, TJ = -40°C to 125°C; VDD = 3.0 V to 5.5 V, IO = 26 mA/120 mA 5
Overtemperature shutdown (VDD = 3 V table) Tsd 150 175 200 °C VDD = 3 V, TJ = -40°C to 125°C 5
Supply current, Rext = Open (VDD = 3 V table) IDD 5 10 mA VDD = 3 V, TJ = -40°C to 125°C; Rext = Open 5
Supply current, Rext = 720 Ω (VDD = 3 V table) IDD 8 14 mA VDD = 3 V, TJ = -40°C to 125°C; Rext = 720 Ω 5
Supply current, Rext = 360 Ω (VDD = 3 V table) IDD 11 18 mA VDD = 3 V, TJ = -40°C to 125°C; Rext = 360 Ω 5
Supply current, Rext = 180 Ω (VDD = 3 V table) IDD 16 22 mA VDD = 3 V, TJ = -40°C to 125°C; Rext = 180 Ω 5
Input voltage (VDD = 5.5 V table) VDD 3 5.5 V VDD = 5.5 V, TJ = -40°C to 125°C 6
Supply voltage to the output pins (VDD = 5.5 V table) VO 20 V VDD = 5.5 V, TJ = -40°C to 125°C 6
Output current (VDD = 5.5 V table) IO 3 mA VDD = 5.5 V, TJ = -40°C to 125°C; VO ≥ 0.6 V 6
Output current (VDD = 5.5 V table) IO 120 mA VDD = 5.5 V, TJ = -40°C to 125°C; VO ≥ 1 V 6
High-level output current, source (VDD = 5.5 V table) IOH -1 mA VDD = 5.5 V, TJ = -40°C to 125°C 6
Low-level output current, sink (VDD = 5.5 V table) IOL 1 mA VDD = 5.5 V, TJ = -40°C to 125°C 6
Low-level output voltage, SDO (VDD = 5.5 V table) VOL 0.4 V VDD = 5.5 V, TJ = -40°C to 125°C; SDO, IOH = 1 mA 6
Output leakage current, TJ = 25°C (VDD = 5.5 V table) Ileak 0.5 μA VDD = 5.5 V, TJ = -40°C to 125°C; VOH = 17 V, TJ = 25°C 6
Output leakage current, TJ = 125°C (VDD = 5.5 V table) Ileak 2 μA VDD = 5.5 V, TJ = -40°C to 125°C; VOH = 17 V, TJ = 125°C 6
Output current error, die-die (VDD = 5.5 V table) IO(1) -6 3 6 % VDD = 5.5 V, TJ = -40°C to 125°C; IOL = 26 mA, VO = 0.6 V, Rext = 720 Ω, TJ = 25°C 6
Output current skew, channel-to-channel (VDD = 5.5 V table) -3 1.5 3 % VDD = 5.5 V, TJ = -40°C to 125°C; IOL = 26 mA, VO = 0.6 V, Rext = 720 Ω, TJ = 25°C 6
Output current error, die-die (VDD = 5.5 V table) IO(2) -6 2 6 % VDD = 5.5 V, TJ = -40°C to 125°C; IOL = 52 mA, VO = 0.8 V, Rext = 360 Ω, TJ = 25°C 6
IOUT vs output voltage regulation (VDD = 5.5 V table) IOUT -0.1 0.1 %/V VDD = 5.5 V, TJ = -40°C to 125°C; VO = 1 V to 3 V, IO = 26 mA 6
IOUT vs supply voltage regulation (VDD = 5.5 V table) IOUT -1 1 %/V VDD = 5.5 V, TJ = -40°C to 125°C; VDD = 3.0 V to 5.5 V, IO = 26 mA/120 mA 6
Overtemperature shutdown (VDD = 5.5 V table) Tsd 150 175 200 °C VDD = 5.5 V, TJ = -40°C to 125°C 6
Supply current, Rext = Open (VDD = 5.5 V table) IDD 6 10 mA VDD = 5.5 V, TJ = -40°C to 125°C; Rext = Open 6
Supply current, Rext = 720 Ω (VDD = 5.5 V table) IDD 11 14 mA VDD = 5.5 V, TJ = -40°C to 125°C; Rext = 720 Ω 6
Supply current, Rext = 360 Ω (VDD = 5.5 V table) IDD 13 18 mA VDD = 5.5 V, TJ = -40°C to 125°C; Rext = 360 Ω 6
Supply current, Rext = 180 Ω (VDD = 5.5 V table) IDD 19 24 mA VDD = 5.5 V, TJ = -40°C to 125°C; Rext = 180 Ω 6
Junction-to-ambient thermal resistance (D package) RθJA 87.4 °C/W 4
Junction-to-case (top) thermal resistance (D package) RθJC(top) 48.1 °C/W 4
Junction-to-board thermal resistance (D package) RθJB 44.4 °C/W 4
Junction-to-top characterization parameter (D package) ψJT 12.5 °C/W 4
Junction-to-board characterization parameter (D package) ψJB 44.2 °C/W 4

CAD (KiCad official)

  • Symbol: TLC5916ID
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOIC-16 (KiCad packages3D, STEP)
  • 3D model files: tlc5916id-etched.step / tlc5916id-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlc5916id.step / tlc5916id.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (40 pp, sha256 f257e916f7b5d37b, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF