Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TLC5628IDWR

Texas Instruments · Digital To Analog Converters (DACs) · SOIC-16-300mil

TLC5628IDWR from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DACB output DAC B analog output, a buffered voltage output whose range is set by REF1 and the RNG bit (1x or 2x).
2 DACA output DAC A analog output, a buffered voltage output whose range is set by REF1 and the RNG bit (1x or 2x).
3 GND power_in Ground return and reference terminal for the device; DAC outputs range between GND and the reference-scaled voltage.
4 DATA input Serial interface digital data input; each data bit is clocked into the serial register on the falling edge of CLK.
5 CLK input Serial interface clock; input data is shifted into the serial interface register on the falling edge of CLK, with a maximum CLK frequency of 1 MHz.
6 VDD power_in Positive supply voltage, 4.75 V minimum to 5.25 V maximum per the recommended operating conditions.
7 DACE output DAC E analog output, a buffered voltage output whose range is set by REF2 and the RNG bit (1x or 2x).
8 DACF output DAC F analog output, a buffered voltage output whose range is set by REF2 and the RNG bit (1x or 2x).
9 DACG output DAC G analog output, a buffered voltage output whose range is set by REF2 and the RNG bit (1x or 2x).
10 DACH output DAC H analog output, a buffered voltage output whose range is set by REF2 and the RNG bit (1x or 2x).
11 REF2 input Reference voltage input to DAC E, F, G and H; this voltage defines the analog output range of those DACs.
12 LOAD input Serial interface load control; when LDAC is low, the falling edge of LOAD latches the data into the output latch and immediately produces the analog voltage at the DAC output.
13 LDAC input Load DAC; when high, no DAC output updates occur as input data is read in, and the DAC outputs update only when LDAC goes from high to low.
14 REF1 input Reference voltage input to DAC A, B, C and D; this voltage defines the analog output range of those DACs.
15 DACD output DAC D analog output, a buffered voltage output whose range is set by REF1 and the RNG bit (1x or 2x).
16 DACC output DAC C analog output, a buffered voltage output whose range is set by REF1 and the RNG bit (1x or 2x).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-16-300mil
Category Data Converters
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD 4.75 5.25 V 6
Low-level voltage VIL 0.8 V 6
Analog full-scale output voltage 3.5 V RL = 10 kΩ 6
Load resistance RL 10 kΩ 6
Setup time, data input tsu(DATA-CLK) 50 ns see Figures 1 and 2 6
Valid time, data input valid after CLK↓ tv(DATA-CLK) 50 ns see Figures 1 and 2 6
Setup time, CLK eleventh falling edge to LOAD tsu(CLK-LOAD) 50 ns see Figure 1 6
Setup time, LOAD↑ to CLK↓ tsu(LOAD-CLK) 50 ns see Figure 1 6
Pulse duration, LOAD tw(LOAD) 250 ns see Figure 1 6
Pulse duration, LDAC tw(LDAC) 250 ns see Figure 2 6
Setup time, LOAD↑ to LDAC↓ tsu(LOAD-LDAC) 0 ns see Figure 2 6
CLK frequency 1 MHz 6
Operating free-air temperature (TLC5628I) TA -40 85 °C TLC5628I 6
Supply voltage (VDD, GND) VDD 7 V 6
Storage temperature range Tstg -50 150 °C 6
Operating free-air temperature range (TLC5628I) TA -40 85 °C TLC5628I 6
Lead temperature 260 °C 1,6 mm (1/16 inch) from case for 10 seconds 6
High-level input current IIH -10 10 µA VI = VDD 7
Low-level input current IIL -10 10 µA VI = 0 V 7
Output sink current IO(sink) 20 µA Each DAC output 7
Output source current IO(source) 2 mA Each DAC output 7
Supply current IDD 4 mA VDD = 5 V 7
Reference input current Iref -10 10 µA VDD = 5 V, Vref = 2 V 7
Input capacitance Ci 15 pF 7
Reference input capacitance 15 pF 7
Linearity error (end point corrected) EL -1 1 LSB Vref = 2 V, × 2 gain 7
Differential-linearity error ED -0.9 0.9 LSB Vref = 2 V, × 2 gain 7
Zero-scale error EZS 0 30 mV Vref = 2 V, × 2 gain 7
Zero-scale-error temperature coefficient 10 µV/°C Vref = 2 V, × 2 gain 7
Full-scale error EFS -60 60 mV Vref = 2 V, × 2 gain 7
Full-scale-error temperature coefficient -25 25 µV/°C Vref = 2 V, × 2 gain 7
Power supply rejection ratio PSRR 0.5 mV/V See Notes 7 and 8 7
Output slew rate 1 V/µs CL = 100 pF, RL = 10 kΩ 7
Output settling time 10 µs To ±0.5 LSB, CL = 100 pF, RL = 10 kΩ, See Note 9 7
Large signal bandwidth 100 kHz Measured at -3 dB point 7
Digital crosstalk -50 dB CLK = 1-MHz square wave measured at DACA-DACD 7
Reference feedthrough -60 dB See Note 10 7
Channel-to-channel isolation -60 dB See Note 11 7
Reference input bandwidth 100 kHz See Note 12 7

CAD (KiCad official)

  • Symbol: TLC5628IDWR
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: tlc5628idwr-etched.step / tlc5628idwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlc5628idwr.step / tlc5628idwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (18 pp, sha256 4f2b294849b20fc9, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF