Generated by kicad-footprint-generator · KiCad file format 20260206
TLC5628IDW
Texas Instruments · Digital To Analog Converters (DACs) · SOIC-16-300mil
TLC5628IDW from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DACB | output | DAC B analog voltage output, with range set to 1× or 2× the REF1 reference (selected by the RNG bit) relative to GND. |
| 2 | DACA | output | DAC A analog voltage output, with range set to 1× or 2× the REF1 reference (selected by the RNG bit) relative to GND. |
| 3 | GND | power_in | Ground return and reference terminal for the device. |
| 4 | DATA | input | Serial interface digital data input; each bit is clocked into the serial register on the falling edge of CLK, with VIH of 0.8 VDD and VIL of 0.8 V. |
| 5 | CLK | input | Serial interface clock; input data is shifted into the serial interface register on the falling edge of CLK, with a maximum clock frequency of 1 MHz. |
| 6 | VDD | power_in | Positive supply voltage, 5 V ±5% (4.75 V to 5.25 V) per the recommended operating conditions. |
| 7 | DACE | output | DAC E analog voltage output, with range set to 1× or 2× the REF2 reference (selected by the RNG bit) relative to GND. |
| 8 | DACF | output | DAC F analog voltage output, with range set to 1× or 2× the REF2 reference (selected by the RNG bit) relative to GND. |
| 9 | DACG | output | DAC G analog voltage output, with range set to 1× or 2× the REF2 reference (selected by the RNG bit) relative to GND. |
| 10 | DACH | output | DAC H analog voltage output, with range set to 1× or 2× the REF2 reference (selected by the RNG bit) relative to GND. |
| 11 | REF2 | input | Reference voltage input for DACs E-H that defines their analog output range; absolute input range is GND - 0.3 V to VDD + 0.3 V. |
| 12 | LOAD | input | Serial interface load control; when LDAC is low, the falling edge of LOAD latches the data into the output latch and immediately updates the DAC output. |
| 13 | LDAC | input | Load DAC; when high, no DAC outputs update as serial data is read in, and outputs update only when LDAC goes from high to low. |
| 14 | REF1 | input | Reference voltage input for DACs A-D that defines their analog output range; absolute input range is GND - 0.3 V to VDD + 0.3 V. |
| 15 | DACD | output | DAC D analog voltage output, with range set to 1× or 2× the REF1 reference (selected by the RNG bit) relative to GND. |
| 16 | DACC | output | DAC C analog voltage output, with range set to 1× or 2× the REF1 reference (selected by the RNG bit) relative to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16-300mil |
| Category | Data Converters |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | 4.75 | 5.25 | V | 6 | ||
| Low-level voltage | VIL | 0.8 | V | 6 | |||
| Analog full-scale output voltage | 3.5 | V | RL = 10 kΩ | 6 | |||
| Load resistance | RL | 10 | kΩ | 6 | |||
| Setup time, data input | tsu(DATA-CLK) | 50 | ns | see Figures 1 and 2 | 6 | ||
| Valid time, data input valid after CLK↓ | tv(DATA-CLK) | 50 | ns | see Figures 1 and 2 | 6 | ||
| Setup time, CLK eleventh falling edge to LOAD | tsu(CLK-LOAD) | 50 | ns | see Figure 1 | 6 | ||
| Setup time, LOAD↑ to CLK↓ | tsu(LOAD-CLK) | 50 | ns | see Figure 1 | 6 | ||
| Pulse duration, LOAD | tw(LOAD) | 250 | ns | see Figure 1 | 6 | ||
| Pulse duration, LDAC | tw(LDAC) | 250 | ns | see Figure 2 | 6 | ||
| Setup time, LOAD↑ to LDAC↓ | tsu(LOAD-LDAC) | 0 | ns | see Figure 2 | 6 | ||
| CLK frequency | 1 | MHz | 6 | ||||
| Operating free-air temperature, TLC5628I | TA | -40 | 85 | °C | 6 | ||
| Supply voltage (VDD, GND) | VDD | 7 | V | 6 | |||
| Operating free-air temperature range, TLC5628I | TA | -40 | 85 | °C | 6 | ||
| Storage temperature range | Tstg | -50 | 150 | °C | 6 | ||
| Lead temperature | 260 | °C | 1,6 mm (1/16 inch) from case for 10 seconds | 6 | |||
| High-level input current | IIH | -10 | 10 | µA | VI = VDD | 7 | |
| Low-level input current | IIL | -10 | 10 | µA | VI = 0 V | 7 | |
| Output sink current | IO(sink) | 20 | µA | Each DAC output | 7 | ||
| Output source current | IO(source) | 2 | mA | Each DAC output | 7 | ||
| Input capacitance | Ci | 15 | pF | 7 | |||
| Reference input capacitance | 15 | pF | 7 | ||||
| Supply current | IDD | 4 | mA | VDD = 5 V | 7 | ||
| Reference input current | Iref | -10 | 10 | µA | VDD = 5 V, Vref = 2 V | 7 | |
| Linearity error (end point corrected) | EL | -1 | 1 | LSB | Vref = 2 V, × 2 gain | 7 | |
| Differential-linearity error | ED | -0.9 | 0.9 | LSB | Vref = 2 V, × 2 gain | 7 | |
| Zero-scale error | EZS | 0 | 30 | mV | Vref = 2 V, × 2 gain | 7 | |
| Zero-scale-error temperature coefficient | 10 | µV/°C | Vref = 2 V, × 2 gain | 7 | |||
| Full-scale error | EFS | -60 | 60 | mV | Vref = 2 V, × 2 gain | 7 | |
| Full-scale-error temperature coefficient | -25 | 25 | µV/°C | Vref = 2 V, × 2 gain | 7 | ||
| Power supply rejection ratio | PSRR | 0.5 | mV/V | See Notes 7 and 8 | 7 | ||
| Output slew rate | 1 | V/µs | CL = 100 pF, RL = 10 kΩ | 7 | |||
| Output settling time | 10 | µs | To ±0.5 LSB, CL = 100 pF, RL = 10 kΩ, See Note 9 | 7 | |||
| Large signal bandwidth | 100 | kHz | Measured at -3 dB point | 7 | |||
| Digital crosstalk | -50 | dB | CLK = 1-MHz square wave measured at DACA-DACD | 7 | |||
| Reference feedthrough | -60 | dB | See Note 10 | 7 | |||
| Channel-to-channel isolation | -60 | dB | See Note 11 | 7 | |||
| Reference input bandwidth | 100 | kHz | See Note 12 | 7 |
CAD (KiCad official)
- Symbol:
TLC5628IDW - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
tlc5628idw-etched.step/tlc5628idw-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlc5628idw.step/tlc5628idw.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (18 pp, sha256
4f2b294849b20fc9, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).