Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TLC555QDRQ1

Texas Instruments · Timers / Counters · SOIC-8

TLC555QDRQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground.
2 TRIG input Start of timing input; TRIG < ½ CONT sets output high and discharge open.
3 OUT output High current timer output signal.
4 RESET input Active low reset input; forces output and discharge low.
5 CONT bidirectional Controls comparator thresholds; outputs 2/3VDD and allows bypass capacitor connection.
6 THRES input End of timing input; THRES > CONT sets output low and discharge low.
7 DISCH tri_state Open collector output to discharge timing capacitor.
8 VDD power_in Input supply voltage, 2V to 15V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Clock/Timing
Pins 8

CAD (KiCad official)

  • Symbol: TLC555QDRQ1
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: tlc555qdrq1-etched.step / tlc555qdrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlc555qdrq1.step / tlc555qdrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (31 pp, sha256 8cb4a38b33ebf483, retrieved 2026-09-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF