Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TLC372CDR

Texas Instruments · Comparators · SOIC-8

TLC372CDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1OUT output Open-drain (N-channel), sink-only output of comparator 1; can be pulled up to an external voltage from 0V to 16V independent of VDD (IOL up to 16mA typ/20mA abs max, VOL 150mV typ/400mV max at IOL=4mA, high-level leakage 0.1nA typ/1µA max at VOH=5V/15V).
2 1IN- input Inverting input of comparator 1; common-mode input voltage range 0V to VDD-1V (25°C) / VDD-1.5V (full temp range), input bias current 5pA typ, differential input voltage rating ±18V max.
3 1IN+ input Non-inverting input of comparator 1; common-mode input voltage range 0V to VDD-1V (25°C) / VDD-1.5V (full temp range), input bias current 5pA typ, differential input voltage rating ±18V max.
4 GND power_in Ground / negative supply (V-) reference pin for the device; for single-supply operation this pin is tied to V- and the output low level is referenced to it.
5 2IN+ input Non-inverting input of comparator 2; common-mode input voltage range 0V to VDD-1V (25°C) / VDD-1.5V (full temp range), input bias current 5pA typ, differential input voltage rating ±18V max.
6 2IN- input Inverting input of comparator 2; common-mode input voltage range 0V to VDD-1V (25°C) / VDD-1.5V (full temp range), input bias current 5pA typ, differential input voltage rating ±18V max.
7 2OUT output Open-drain (N-channel), sink-only output of comparator 2; can be pulled up to an external voltage from 0V to 16V independent of VDD (IOL up to 16mA typ/20mA abs max, VOL 150mV typ/400mV max at IOL=4mA, high-level leakage 0.1nA typ/1µA max at VOH=5V/15V).
8 VCC power_in Positive supply voltage (V+) pin; recommended operating range 3V to 16V for TLC372C, 18V absolute maximum, with typical supply current of 150µA (both comparators, no load) at VDD=5V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Amplifiers/Comparators
Pins 8

CAD (KiCad official)

  • Symbol: TLC372CDR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: tlc372cdr-etched.step / tlc372cdr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlc372cdr.step / tlc372cdr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (37 pp, sha256 d693969cb40584f6, retrieved 2026-09-22, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF