main
Ray tlc3578ipwr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) e079a7e
{
  "slug": "tlc3578ipwr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Analog To Digital Converters (ADC), TSSOP-24. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "data acquisition",
    "tlc3578ipwr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tlc3578ipwr.kicad_sym",
    "tlc3578ipwr.kicad_mod",
    "tlc3578ipwr.glb",
    "tlc3578ipwr.step",
    "tlc3578ipwr.lbr",
    "docs/hero.png",
    "docs/tlc3578ipwr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "TLC3578IPWR",
    "manufacturer": "Texas Instruments",
    "package": "TSSOP-24",
    "pin_count": 24,
    "category": "Data Acquisition",
    "subcategory": "Analog To Digital Converters (ADC)",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tlc2574",
    "parts": {
      "symbol": "tlc3578ipwr.kicad_sym",
      "footprint": "tlc3578ipwr.kicad_mod",
      "model_3d": "tlc3578ipwr-etched.glb",
      "model_3d_plain": "tlc3578ipwr.glb",
      "model_3d_step": "tlc3578ipwr-etched.step",
      "model_3d_step_plain": "tlc3578ipwr.step",
      "lbr": "tlc3578ipwr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2670863"
    },
    "pins": [
      {
        "number": "1",
        "name": "SCLK",
        "type": "input",
        "description": "Serial clock input from the host processor to clock in the input from SDI and clock out the output via SDO, maximum frequency 25 MHz."
      },
      {
        "number": "2",
        "name": "FS",
        "type": "input",
        "description": "Frame sync input from DSP; rising edge indicates the start of a serial data frame being transferred."
      },
      {
        "number": "3",
        "name": "SDI",
        "type": "input",
        "description": "Serial data input; first 4 MSBs decoded as one 4-bit command, remaining bits filled with zeros except for WRITE CFR command."
      },
      {
        "number": "4",
        "name": "EOC/INT",
        "type": "output",
        "description": "End of conversion (EOC) or interrupt to host processor (INT); EOC used in conversion mode 00 only, goes low at end of sampling."
      },
      {
        "number": "5",
        "name": "SDO",
        "type": "tri_state",
        "description": "3-state serial output for the A/D conversion result, MSB first, in high-impedance state when CS is high."
      },
      {
        "number": "6",
        "name": "DGND",
        "type": "power_in",
        "description": "Digital ground return for the internal circuitry."
      },
      {
        "number": "7",
        "name": "DVDD",
        "type": "power_in",
        "description": "Digital supply voltage, recommended range 2.7 V to 5.5 V."
      },
      {
        "number": "8",
        "name": "CS",
        "type": "input",
        "description": "Chip select; falling edge resets internal 4-bit counter and enables SDI and SCLK, when high SDO is in high-impedance state."
      },
      {
        "number": "9",
        "name": "A0",
        "type": "input",
        "description": "Analog signal input channel 0, internally multiplexed with driving source impedance ≤ 25 Ω for normal sampling."
      },
      {
        "number": "10",
        "name": "A1",
        "type": "input",
        "description": "Analog signal input channel 1, internally multiplexed with driving source impedance ≤ 25 Ω for normal sampling."
      },
      {
        "number": "11",
        "name": "A2",
        "type": "input",
        "description": "Analog signal input channel 2, internally multiplexed with driving source impedance ≤ 25 Ω for normal sampling."
      },
      {
        "number": "12",
        "name": "A3",
        "type": "input",
        "description": "Analog signal input channel 3, internally multiplexed with driving source impedance ≤ 25 Ω for normal sampling."
      },
      {
        "number": "13",
        "name": "A4",
        "type": "input",
        "description": "Analog signal input channel 4, internally multiplexed with driving source impedance ≤ 25 Ω for normal sampling."
      },
      {
        "number": "14",
        "name": "A5",
        "type": "input",
        "description": "Analog signal input channel 5, internally multiplexed with driving source impedance ≤ 25 Ω for normal sampling."
      },
      {
        "number": "15",
        "name": "A6",
        "type": "input",
        "description": "Analog signal input channel 6, internally multiplexed with driving source impedance ≤ 25 Ω for normal sampling."
      },
      {
        "number": "16",
        "name": "A7",
        "type": "input",
        "description": "Analog signal input channel 7, internally multiplexed with driving source impedance ≤ 25 Ω for normal sampling."
      },
      {
        "number": "17",
        "name": "AVDD",
        "type": "power_in",
        "description": "Analog supply voltage, recommended range 4.75 V to 5.5 V."
      },
      {
        "number": "18",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground return for the internal circuitry."
      },
      {
        "number": "19",
        "name": "REFP",
        "type": "input",
        "description": "External positive reference input, range 3.96 V to 4.04 V; install decoupling capacitors 10 µF in parallel with 0.1 µF between REFP and REFM."
      },
      {
        "number": "20",
        "name": "REFM",
        "type": "input",
        "description": "External low reference input; connect to AGND to establish the ±10 V bipolar input range."
      },
      {
        "number": "21",
        "name": "COMP",
        "type": "passive",
        "description": "Internal compensation pin; install 0.1 µF compensation capacitor between this pin and AGND."
      },
      {
        "number": "22",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground return for the internal circuitry."
      },
      {
        "number": "23",
        "name": "AVDD",
        "type": "power_in",
        "description": "Analog supply voltage, recommended range 4.75 V to 5.5 V."
      },
      {
        "number": "24",
        "name": "CSTART",
        "type": "input",
        "description": "External sampling trigger signal; high-to-low transition starts sampling, low-to-high transition puts S/H in hold mode and starts conversion with 15 ns internal delay."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 54,
        "cost_usd": 0.582,
        "at": "2026-09-23T17:33:36"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tlc2574",
        "pages": 54,
        "sha256": "a98de3fa366cd8b4",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 24,
        "described": 24,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tlc3578ipwr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          7.8,
          0.97
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "706322f42d9793ebf28d5b80100a68bfa8769998a00b78acadf7af937fc1454f",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tlc3578ipwr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          7.8,
          0.97
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "31c235fb841f81ed9fd04fd6d864d92a7cb307755ffd0c23f0d587294a7142fc",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}