TLC352CDR

{
  "slug": "tlc352cdr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Comparators, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "amplifiers-comparators",
    "tlc352cdr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tlc352cdr.kicad_sym",
    "tlc352cdr.kicad_mod",
    "tlc352cdr.glb",
    "tlc352cdr.step",
    "tlc352cdr.lbr",
    "docs/hero.png",
    "docs/tlc352cdr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tlc352cdr-hero.glb",
    "tlc352cdr-hero.overlay.json"
  ],
  "component": {
    "mpn": "TLC352CDR",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Amplifiers/Comparators",
    "subcategory": "Comparators",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tlc352",
    "parts": {
      "symbol": "tlc352cdr.kicad_sym",
      "footprint": "tlc352cdr.kicad_mod",
      "model_3d": "tlc352cdr-hero.glb",
      "model_3d_plain": "tlc352cdr.glb",
      "model_3d_step": "tlc352cdr-etched.step",
      "model_3d_step_plain": "tlc352cdr.step",
      "lbr": "tlc352cdr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2878352",
      "digikey": "296-38274-2-ND",
      "mouser": "595-TLC352CDR"
    },
    "distributor_check": {
      "checked_at": "2026-10-07T07:24:39Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-38274-2-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-TLC352CDR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "1OUT",
        "type": "output",
        "description": "Comparator 1 N-channel open-drain output that can be pulled to an external voltage of 0V to 16V independent of VDD."
      },
      {
        "number": "2",
        "name": "1IN−",
        "type": "input",
        "description": "Comparator 1 inverting input, with common-mode range from GND to 1.5V below VDD over temperature and absolute maximum input voltage of -0.3V to VDD."
      },
      {
        "number": "3",
        "name": "1IN+",
        "type": "input",
        "description": "Comparator 1 non-inverting input, with common-mode range from GND to 1.5V below VDD over temperature and absolute maximum input voltage of -0.3V to VDD."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground (negative supply) pin for the device."
      },
      {
        "number": "5",
        "name": "2IN+",
        "type": "input",
        "description": "Comparator 2 non-inverting input, with common-mode range from GND to 1.5V below VDD over temperature and absolute maximum input voltage of -0.3V to VDD."
      },
      {
        "number": "6",
        "name": "2IN−",
        "type": "input",
        "description": "Comparator 2 inverting input, with common-mode range from GND to 1.5V below VDD over temperature and absolute maximum input voltage of -0.3V to VDD."
      },
      {
        "number": "7",
        "name": "2OUT",
        "type": "output",
        "description": "Comparator 2 N-channel open-drain output that can be pulled to an external voltage of 0V to 16V independent of VDD."
      },
      {
        "number": "8",
        "name": "VDD",
        "type": "power_in",
        "description": "Positive supply pin with recommended operating range of 2.7V to 16V and absolute maximum of 18V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text+vision",
        "consensus_model": "claude-opus-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The features section gives a supply range of 2.7V to 18V, but the recommended operating conditions g; Pin functions were read from the package drawing (Figure 3-1, shared by the D and P packages). The d",
          "vision extraction: provenance cannot be text-verified; needs consensus"
        ],
        "pages_sent": 26,
        "cost_usd": 0.4801,
        "at": "2026-10-07T07:24:18"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tlc352",
        "pages": 26,
        "sha256": "56e41bd313c79c25",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tlc352cdr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tlc352cdr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "029a9b2eaecbf6001fcbb827214509528edb2d4ef6c334db27b59a5bbcf6206b",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}