Generated by kicad-footprint-generator · KiCad file format 20260206
TLC272BIDR
Texas Instruments · Operational Amplifier · SOIC-8
TLC272BIDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Amplifier 1 output; voltage range includes negative rail (VOL 0-50 mV typ) to VOH 4.95 V max at VDD = 5 V, RL = 10 kΩ; maximum output current ±30 mA per output. |
| 2 | 1IN- | input | Amplifier 1 inverting input; high-impedance >10¹² Ω typical, input voltage range -0.3 V to VDD, input bias current 10 pA typ / 60 pA max at 25 °C. |
| 3 | 1IN+ | input | Amplifier 1 non-inverting input; high-impedance >10¹² Ω typical, common-mode input voltage range -0.1 V to VDD-1 V at 25 °C (VDD = 5 V), input bias current 10 pA typ / 60 pA max at 25 °C. |
| 4 | GND | power_in | Negative supply / ground reference; total current out of GND pin must not exceed 45 mA absolute maximum. |
| 5 | 2IN+ | input | Amplifier 2 non-inverting input; high-impedance >10¹² Ω typical, common-mode input voltage range -0.1 V to VDD-1 V at 25 °C (VDD = 5 V), input bias current 10 pA typ / 60 pA max at 25 °C. |
| 6 | 2IN- | input | Amplifier 2 inverting input; high-impedance >10¹² Ω typical, input voltage range -0.3 V to VDD, input bias current 10 pA typ / 60 pA max at 25 °C. |
| 7 | 2OUT | output | Amplifier 2 output; voltage range includes negative rail (VOL 0-50 mV typ) to VOH 4.95 V max at VDD = 5 V, RL = 10 kΩ; maximum output current ±30 mA per output. |
| 8 | VDD | power_in | Positive supply voltage; recommended operating range 4 V to 16 V (I-suffix, -40 °C to 85 °C); total supply current (both amplifiers) 1.12 mA typ / 3.2 mA max at VDD = 5 V, 25 °C; total current into VDD must not exceed 45 mA absolute maximum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage, 25°C | VIO | 0.12 | 2000 | μV | TLC272BI, VDD=5V, VO=1.4V, RS=50Ω, VIC=0, RL=10kΩ, 25°C | 7 | |
| Input offset voltage, full range | VIO | 3500 | μV | TLC272BI, VDD=5V, VO=1.4V, RS=50Ω, VIC=0, RL=10kΩ, full range | 7 | ||
| Input offset voltage, 25°C | VIO | 0.12 | 2000 | μV | TLC272BI, VDD=10V, VO=1.4V, RS=50Ω, VIC=0, RL=10kΩ, 25°C | 8 | |
| Input offset voltage, full range | VIO | 3500 | μV | TLC272BI, VDD=10V, VO=1.4V, RS=50Ω, VIC=0, RL=10kΩ, full range | 8 | ||
| Input offset current, 25°C | IIO | 10 | 60 | pA | VO=2.5V, VIC=2.5V, 25°C, VDD=5V | 7 | |
| Input offset current, 85°C | IIO | 24 | 15 | pA | VO=2.5V, VIC=2.5V, 85°C, VDD=5V (printed values inconsistent, see review) | 7 | |
| Input bias current, 25°C | IIB | 10 | 60 | pA | 25°C, VDD=5V | 7 | |
| Input bias current, 85°C | IIB | 200 | 35 | pA | 85°C, VDD=5V (printed values inconsistent, see review) | 7 | |
| High-level output voltage, 25°C | VOH | 3.2 | 4.95 | V | VID=100mV, RL=10kΩ, 25°C, VDD=5V | 7 | |
| High-level output voltage, -40°C | VOH | 3 | 4.95 | V | VID=100mV, RL=10kΩ, -40°C, VDD=5V | 7 | |
| High-level output voltage, 85°C | VOH | 3 | 4.95 | V | VID=100mV, RL=10kΩ, 85°C, VDD=5V | 7 | |
| Low-level output voltage, 25°C | VOL | 0 | 50 | mV | VID=-100mV, IOL=0, 25°C, VDD=5V | 7 | |
| Low-level output voltage, -40°C | VOL | 0 | 50 | mV | VID=-100mV, IOL=0, -40°C, VDD=5V | 7 | |
| Low-level output voltage, 85°C | VOL | 0 | 50 | mV | VID=-100mV, IOL=0, 85°C, VDD=5V | 7 | |
| Large-signal differential voltage amplification, 25°C | AVD | 5 | 1000 | V/mV | VO=1V to 6V, RL=10kΩ, 25°C, VDD=5V | 7 | |
| Large-signal differential voltage amplification, -40°C | AVD | 3.5 | V/mV | VO=1V to 6V, RL=10kΩ, -40°C, VDD=5V | 7 | ||
| Large-signal differential voltage amplification, 85°C | AVD | 3.5 | V/mV | VO=1V to 6V, RL=10kΩ, 85°C, VDD=5V | 7 | ||
| Common-mode rejection ratio, 25°C | CMRR | 65 | 80 | dB | VIC=-0.1V < VIC < 3V, 25°C, VDD=5V | 7 | |
| Common-mode rejection ratio, -40°C | CMRR | 60 | dB | VIC=-0.1V < VIC < 3V, -40°C, VDD=5V | 7 | ||
| Common-mode rejection ratio, 85°C | CMRR | 60 | dB | VIC=-0.1V < VIC < 3V, 85°C, VDD=5V | 7 | ||
| Supply-voltage rejection ratio, 25°C | kSVR | 65 | 120 | dB | VDD=5V to 10V, VO=1.4V, 25°C | 7 | |
| Supply-voltage rejection ratio, -40°C | kSVR | 60 | dB | VDD=5V to 10V, VO=1.4V, -40°C | 7 | ||
| Supply-voltage rejection ratio, 85°C | kSVR | 60 | dB | VDD=5V to 10V, VO=1.4V, 85°C | 7 | ||
| Supply current (two amplifiers), 25°C | IDD | 1.12 | 3.2 | mA | VO=2.5V, no load, VIC=2.5V, 25°C, VDD=5V | 7 | |
| Supply current (two amplifiers), -40°C | IDD | 4.4 | mA | VO=2.5V, no load, VIC=2.5V, -40°C, VDD=5V | 7 | ||
| Supply current (two amplifiers), 85°C | IDD | 2.4 | mA | VO=2.5V, no load, VIC=2.5V, 85°C, VDD=5V | 7 | ||
| Input offset current, 25°C | IIO | 10 | 60 | pA | VO=5V, VIC=5V, 25°C, VDD=10V | 8 | |
| Input offset current, 85°C | IIO | 26 | 1000 | pA | VO=5V, VIC=5V, 85°C, VDD=10V | 8 | |
| Input bias current, 25°C | IIB | 10 | 60 | pA | 25°C, VDD=10V | 8 | |
| Input bias current, 85°C | IIB | 220 | 2000 | pA | 85°C, VDD=10V | 8 | |
| High-level output voltage, 25°C | VOH | 8 | 9.95 | V | VID=100mV, RL=10kΩ, 25°C, VDD=10V | 8 | |
| High-level output voltage, -40°C | VOH | 7.8 | V | VID=100mV, RL=10kΩ, -40°C, VDD=10V | 8 | ||
| High-level output voltage, 85°C | VOH | 7.8 | V | VID=100mV, RL=10kΩ, 85°C, VDD=10V | 8 | ||
| Low-level output voltage, 25°C | VOL | 0 | 50 | mV | VID=-100mV, IOL=0, 25°C, VDD=10V | 8 | |
| Low-level output voltage, -40°C | VOL | 0 | 50 | mV | VID=-100mV, IOL=0, -40°C, VDD=10V | 8 | |
| Low-level output voltage, 85°C | VOL | 0 | 50 | mV | VID=-100mV, IOL=0, 85°C, VDD=10V | 8 | |
| Large-signal differential voltage amplification, 25°C | AVD | 10 | 1000 | V/mV | VO=1V to 6V, RL=10kΩ, 25°C, VDD=10V | 8 | |
| Large-signal differential voltage amplification, -40°C | AVD | 7 | V/mV | VO=1V to 6V, RL=10kΩ, -40°C, VDD=10V | 8 | ||
| Large-signal differential voltage amplification, 85°C | AVD | 7 | V/mV | VO=1V to 6V, RL=10kΩ, 85°C, VDD=10V | 8 | ||
| Common-mode rejection ratio, 25°C | CMRR | 65 | 85 | dB | VIC=-0.1V < VIC < 8V, 25°C, VDD=10V | 8 | |
| Common-mode rejection ratio, -40°C | CMRR | 60 | dB | VIC=-0.1V < VIC < 8V, -40°C, VDD=10V | 8 | ||
| Common-mode rejection ratio, 85°C | CMRR | 60 | 88 | dB | VIC=-0.1V < VIC < 8V, 85°C, VDD=10V | 8 | |
| Supply-voltage rejection ratio, 25°C | kSSVR | 65 | 120 | dB | VDD=5V to 10V, VO=1.4V, 25°C | 8 | |
| Supply-voltage rejection ratio, -40°C | kSSVR | 60 | dB | VDD=5V to 10V, VO=1.4V, -40°C | 8 | ||
| Supply-voltage rejection ratio, 85°C | kSSVR | 60 | dB | VDD=5V to 10V, VO=1.4V, 85°C | 8 | ||
| Supply current (two amplifiers), 25°C | IDD | 1.12 | 4 | mA | VO=5V, no load, VIC=5V, 25°C, VDD=10V | 8 | |
| Supply current (two amplifiers), -40°C | IDD | 5 | mA | VO=5V, no load, VIC=5V, -40°C, VDD=10V | 8 | ||
| Supply current (two amplifiers), 85°C | IDD | 3.2 | mA | VO=5V, no load, VIC=5V, 85°C, VDD=10V | 8 | ||
| Supply voltage | VDD | 4 | 16 | V | I suffix | 4 | |
| Common-mode input voltage | VIC | -0.2 | 3.5 | V | VDD = 5V, I suffix | 4 | |
| Common-mode input voltage | VIC | -0.2 | 8.5 | V | VDD = 10V, I suffix | 4 | |
| Operating free-air temperature | TA | -40 | 85 | °C | I suffix | 4 | |
| Supply voltage | VDD | 18 | V | 4 | |||
| Input current | II | -5 | 5 | mA | 4 | ||
| Output current | IO | -30 | 30 | mA | Each output | 4 | |
| Total current into VDD | 45 | mA | 4 | ||||
| Total current out of GND | 45 | mA | 4 | ||||
| Operating free-air temperature, I suffix | TA | -40 | 85 | °C | I suffix | 4 | |
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Lead temperature | 260 | °C | 1,6mm (1/16 inch) from case for 10 seconds, D package | 4 |
CAD (KiCad official)
- Symbol:
TLC272BIDR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
tlc272bidr-etched.step/tlc272bidr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlc272bidr.step/tlc272bidr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (36 pp, sha256
00b6d1d3e858d223, retrieved 2026-09-26, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-sonnet-4-6(text+vision), consensusclaude-opus-4-7(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).