main
Ray
Publish 0.1.0
54d7a94
TLC2262CP
Texas Instruments · Operational Amplifier · PDIP-8
TLC2262CP from Texas Instruments, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Output of amplifier 1, which swings to both supply rails; absolute maximum output current is ±50 mA. |
| 2 | 1IN- | input | Inverting input of amplifier 1; the common-mode input range is VDD- to VDD+ - 1.5 V and input current is limited to ±5 mA. |
| 3 | 1IN+ | input | Non-inverting input of amplifier 1; the common-mode input range is VDD- to VDD+ - 1.5 V and input current is limited to ±5 mA. |
| 4 | VDD-/GND | power_in | Negative supply rail (VDD-/GND); operates from ±2.2 V to ±8 V, or single supply 4.4 V to 16 V with this pin as GND. |
| 5 | 2IN+ | input | Non-inverting input of amplifier 2; the common-mode input range is VDD- to VDD+ - 1.5 V and input current is limited to ±5 mA. |
| 6 | 2IN- | input | Inverting input of amplifier 2; the common-mode input range is VDD- to VDD+ - 1.5 V and input current is limited to ±5 mA. |
| 7 | 2OUT | output | Output of amplifier 2, which swings to both supply rails; absolute maximum output current is ±50 mA. |
| 8 | VDD+ | power_in | Positive supply rail; operates from ±2.2 V to ±8 V (absolute maximum 8 V with respect to the midpoint of VDD+ and VDD-). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | PDIP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VIO | 300 | 2500 | µV | TA = 25°C, VDD = 5 V | 6 | |
| Input offset voltage | VIO | 3000 | µV | Full range (0°C to 70°C), VDD = 5 V | 6 | ||
| Input offset current | IIO | 100 | pA | Full range (0°C to 70°C), VDD = 5 V | 6 | ||
| Input bias current | IIB | 100 | pA | Full range (0°C to 70°C), VDD = 5 V | 6 | ||
| Common-mode input voltage range | VICR | 0 | 4 | V | 25°C, RS = 50 Ω, /VIO/ ≤ 5 mV, VDD = 5 V | 6 | |
| Common-mode input voltage range | VICR | 0 | 3.5 | V | Full range, RS = 50 Ω, /VIO/ ≤ 5 mV, VDD = 5 V | 6 | |
| High-level output voltage | VOH | 4.85 | 4.94 | V | IOH = 100 µA, 25°C, VDD = 5 V | 6 | |
| High-level output voltage | VOH | 4.82 | V | IOH = -100 µA, Full range, VDD = 5 V | 6 | ||
| High-level output voltage | VOH | 4.7 | 4.85 | V | IOH = 400 µA, 25°C, VDD = 5 V | 6 | |
| High-level output voltage | VOH | 4.6 | V | IOH = -400 µA, Full range, VDD = 5 V | 6 | ||
| Low-level output voltage | VOL | 0.09 | 0.15 | V | VIC = 2.5 V, IOL = 500 µA, 25°C, VDD = 5 V | 6 | |
| Low-level output voltage | VOL | 0.15 | V | VIC = 2.5 V, IOL = 500 µA, Full range, VDD = 5 V | 6 | ||
| Low-level output voltage | VOL | 0.2 | 0.3 | V | VIC = 2.5 V, IOL = 1 A (as printed), 25°C, VDD = 5 V | 6 | |
| Low-level output voltage | VOL | 0.3 | V | VIC = 2.5 V, IOL = 1 A (as printed), Full range, VDD = 5 V | 6 | ||
| Low-level output voltage | VOL | 0.7 | 1 | V | VIC = 2.5 V, IOL = 4 A (as printed), 25°C, VDD = 5 V | 6 | |
| Low-level output voltage | VOL | 1.2 | V | VIC = 2.5 V, IOL = 4 A (as printed), Full range, VDD = 5 V | 6 | ||
| Large-signal differential voltage amplification | AVD | 80 | 170 | V/mV | RL = 50 kΩ, VIC = 2.5 V, VO = 1 V to 4 V, 25°C, VDD = 5 V | 6 | |
| Large-signal differential voltage amplification | AVD | 55 | V/mV | RL = 50 kΩ, VIC = 2.5 V, VO = 1 V to 4 V, Full range, VDD = 5 V | 6 | ||
| Common-mode rejection ratio | CMRR | 70 | 83 | dB | VIC = 0 to 2.7 V, VO = 2.5 V, RS = 50 Ω, 25°C, VDD = 5 V | 6 | |
| Supply-voltage rejection ratio | kSVR | 80 | 95 | dB | VDD = 4.4 V to 16 V, VIC = VDD/2, No load, 25°C | 6 | |
| Supply current | IDD | 400 | 500 | µA | VO = 2.5 V, No load, 25°C, VDD = 5 V | 6 | |
| Supply current | IDD | 500 | µA | VO = 2.5 V, No load, Full range, VDD = 5 V | 6 | ||
| Slew rate at unity gain | SR | 0.35 | 0.55 | V/µs | VO = 1.5 V to 3.5 V, RL = 50 kΩ, CL = 100 pF, 25°C, VDD = 5 V | 7 | |
| Slew rate at unity gain | SR | 0.3 | V/µs | VO = 1.5 V to 3.5 V, RL = 50 kΩ, CL = 100 pF, Full range, VDD = 5 V | 7 | ||
| Input offset voltage | VIO | 300 | 2500 | µV | TA = 25°C, VDD± = ±5 V | 8 | |
| Input offset voltage | VIO | 3000 | µV | Full range (0°C to 70°C), VDD± = ±5 V | 8 | ||
| Input offset current | IIO | 100 | pA | Full range (0°C to 70°C), VDD± = ±5 V | 8 | ||
| Input bias current | IIB | 100 | pA | Full range (0°C to 70°C), VDD± = ±5 V | 8 | ||
| Common-mode input voltage range | VICR | -5 | 4 | V | 25°C, RS = 50 Ω, /VIO/ ≤ 5 mV, VDD± = ±5 V | 8 | |
| Common-mode input voltage range | VICR | -5 | 3.5 | V | Full range, RS = 50 Ω, /VIO/ ≤ 5 mV, VDD± = ±5 V | 8 | |
| Maximum positive peak output voltage | VOM+ | 4.85 | 4.94 | V | IO = 100 µA, 25°C, VDD± = ±5 V | 8 | |
| Maximum positive peak output voltage | VOM+ | 4.82 | V | IO = -100 µA, Full range, VDD± = ±5 V | 8 | ||
| Maximum positive peak output voltage | VOM+ | 4.7 | 4.85 | V | IO = 400 µA, 25°C, VDD± = ±5 V | 8 | |
| Maximum positive peak output voltage | VOM+ | 4.6 | V | IO = -400 µA, Full range, VDD± = ±5 V | 8 | ||
| Maximum negative peak output voltage | VOM- | -4.91 | -4.85 | V | VIC = 0, IO = 500 µA, 25°C, VDD± = ±5 V | 8 | |
| Maximum negative peak output voltage | VOM- | -4.85 | V | VIC = 0, IO = 500 µA, Full range, VDD± = ±5 V | 8 | ||
| Maximum negative peak output voltage | VOM- | -4.8 | -4.7 | V | VIC = 0, IO = 1 A (as printed), 25°C, VDD± = ±5 V | 8 | |
| Maximum negative peak output voltage | VOM- | -4.7 | V | VIC = 0, IO = 1 A (as printed), Full range, VDD± = ±5 V | 8 | ||
| Maximum negative peak output voltage | VOM- | -4.3 | -4 | V | VIC = 0, IO = 4 A (as printed), 25°C, VDD± = ±5 V | 8 | |
| Large-signal differential voltage amplification | AVD | 80 | 200 | V/mV | RL = 50 kΩ, VO = ±4 V, 25°C, VDD± = ±5 V | 8 | |
| Large-signal differential voltage amplification | AVD | 55 | V/mV | RL = 50 kΩ, VO = ±4 V, Full range, VDD± = ±5 V | 8 | ||
| Common-mode rejection ratio | CMRR | 75 | 88 | dB | VIC = -5 V to 2.7 V, VO = 0 V, RS = 50 Ω, 25°C, VDD± = ±5 V | 8 | |
| Supply-voltage rejection ratio | kSVR | 80 | 95 | dB | VDD± = ±2.2 V to ±8 V, VIC = 0, No load, 25°C | 8 | |
| Supply current | IDD | 425 | 500 | µA | VO = 0 V, No load, 25°C, VDD± = ±5 V | 8 | |
| Supply current | IDD | 500 | µA | VO = 0 V, No load, Full range, VDD± = ±5 V | 8 | ||
| Slew rate at unity gain | SR | 0.35 | 0.55 | V/µs | VO = ±1.9 V, RL = 50 kΩ, CL = 100 pF, 25°C, VDD± = ±5 V | 9 | |
| Slew rate at unity gain | SR | 0.3 | V/µs | VO = ±1.9 V, RL = 50 kΩ, CL = 100 pF, Full range, VDD± = ±5 V | 9 | ||
| Supply voltage | VDD± | 2.2 | 8 | V | C suffix | 5 | |
| Operating free-air temperature | TA | 0 | 70 | °C | C suffix | 5 | |
| Supply voltage | VDD+ | 8 | V | Voltages referenced to midpoint of VDD+ and VDD-, see Note 1 | 5 | ||
| Supply voltage | VDD- | -8 | V | Voltages referenced to midpoint of VDD+ and VDD-, see Note 1 | 5 | ||
| Differential input voltage | VID | -16 | 16 | V | See Note 2 (IN+ with respect to IN-) | 5 | |
| Input current (each input) | II | -5 | 5 | mA | Each input | 5 | |
| Output current | IO | -50 | 50 | mA | 5 | ||
| Total current into VDD+ | 50 | mA | 5 | ||||
| Total current out of VDD- | 50 | mA | 5 | ||||
| Operating free-air temperature range, C suffix | TA | 0 | 70 | °C | C suffix | 5 | |
| Storage temperature range | Tstg | -65 | 150 | °C | 5 | ||
| Lead temperature (P package) | 260 | °C | 1,6 mm (1/16 inch) from case for 10 seconds, D, N, P, and PW packages | 5 | |||
| Continuous total power dissipation (P package) | PD | 1000 | mW | TA ≤ 25°C, P package; derate 8.0 mW/°C above TA = 25°C | 5 |
CAD (KiCad official)
- Symbol:
TLC2262CP - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: PDIP-8 (KiCad packages3D, STEP)
- 3D model files:
tlc2262cp-etched.step/tlc2262cp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlc2262cp.step/tlc2262cp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (80 pp, sha256
94390a581849aaf8, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TLC2262CP
**Texas Instruments** · Operational Amplifier · PDIP-8
TLC2262CP from Texas Instruments, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Output of amplifier 1, which swings to both supply rails; absolute maximum output current is ±50 mA. |
| 2 | 1IN- | input | Inverting input of amplifier 1; the common-mode input range is VDD- to VDD+ - 1.5 V and input current is limited to ±5 mA. |
| 3 | 1IN+ | input | Non-inverting input of amplifier 1; the common-mode input range is VDD- to VDD+ - 1.5 V and input current is limited to ±5 mA. |
| 4 | VDD-/GND | power_in | Negative supply rail (VDD-/GND); operates from ±2.2 V to ±8 V, or single supply 4.4 V to 16 V with this pin as GND. |
| 5 | 2IN+ | input | Non-inverting input of amplifier 2; the common-mode input range is VDD- to VDD+ - 1.5 V and input current is limited to ±5 mA. |
| 6 | 2IN- | input | Inverting input of amplifier 2; the common-mode input range is VDD- to VDD+ - 1.5 V and input current is limited to ±5 mA. |
| 7 | 2OUT | output | Output of amplifier 2, which swings to both supply rails; absolute maximum output current is ±50 mA. |
| 8 | VDD+ | power_in | Positive supply rail; operates from ±2.2 V to ±8 V (absolute maximum 8 V with respect to the midpoint of VDD+ and VDD-). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | PDIP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VIO | | 300 | 2500 | µV | TA = 25°C, VDD = 5 V | 6 |
| Input offset voltage | VIO | | | 3000 | µV | Full range (0°C to 70°C), VDD = 5 V | 6 |
| Input offset current | IIO | | | 100 | pA | Full range (0°C to 70°C), VDD = 5 V | 6 |
| Input bias current | IIB | | | 100 | pA | Full range (0°C to 70°C), VDD = 5 V | 6 |
| Common-mode input voltage range | VICR | 0 | | 4 | V | 25°C, RS = 50 Ω, /VIO/ ≤ 5 mV, VDD = 5 V | 6 |
| Common-mode input voltage range | VICR | 0 | | 3.5 | V | Full range, RS = 50 Ω, /VIO/ ≤ 5 mV, VDD = 5 V | 6 |
| High-level output voltage | VOH | 4.85 | 4.94 | | V | IOH = 100 µA, 25°C, VDD = 5 V | 6 |
| High-level output voltage | VOH | 4.82 | | | V | IOH = -100 µA, Full range, VDD = 5 V | 6 |
| High-level output voltage | VOH | 4.7 | 4.85 | | V | IOH = 400 µA, 25°C, VDD = 5 V | 6 |
| High-level output voltage | VOH | 4.6 | | | V | IOH = -400 µA, Full range, VDD = 5 V | 6 |
| Low-level output voltage | VOL | | 0.09 | 0.15 | V | VIC = 2.5 V, IOL = 500 µA, 25°C, VDD = 5 V | 6 |
| Low-level output voltage | VOL | | | 0.15 | V | VIC = 2.5 V, IOL = 500 µA, Full range, VDD = 5 V | 6 |
| Low-level output voltage | VOL | | 0.2 | 0.3 | V | VIC = 2.5 V, IOL = 1 A (as printed), 25°C, VDD = 5 V | 6 |
| Low-level output voltage | VOL | | | 0.3 | V | VIC = 2.5 V, IOL = 1 A (as printed), Full range, VDD = 5 V | 6 |
| Low-level output voltage | VOL | | 0.7 | 1 | V | VIC = 2.5 V, IOL = 4 A (as printed), 25°C, VDD = 5 V | 6 |
| Low-level output voltage | VOL | | | 1.2 | V | VIC = 2.5 V, IOL = 4 A (as printed), Full range, VDD = 5 V | 6 |
| Large-signal differential voltage amplification | AVD | 80 | 170 | | V/mV | RL = 50 kΩ, VIC = 2.5 V, VO = 1 V to 4 V, 25°C, VDD = 5 V | 6 |
| Large-signal differential voltage amplification | AVD | 55 | | | V/mV | RL = 50 kΩ, VIC = 2.5 V, VO = 1 V to 4 V, Full range, VDD = 5 V | 6 |
| Common-mode rejection ratio | CMRR | 70 | 83 | | dB | VIC = 0 to 2.7 V, VO = 2.5 V, RS = 50 Ω, 25°C, VDD = 5 V | 6 |
| Supply-voltage rejection ratio | kSVR | 80 | 95 | | dB | VDD = 4.4 V to 16 V, VIC = VDD/2, No load, 25°C | 6 |
| Supply current | IDD | | 400 | 500 | µA | VO = 2.5 V, No load, 25°C, VDD = 5 V | 6 |
| Supply current | IDD | | | 500 | µA | VO = 2.5 V, No load, Full range, VDD = 5 V | 6 |
| Slew rate at unity gain | SR | | 0.35 | 0.55 | V/µs | VO = 1.5 V to 3.5 V, RL = 50 kΩ, CL = 100 pF, 25°C, VDD = 5 V | 7 |
| Slew rate at unity gain | SR | 0.3 | | | V/µs | VO = 1.5 V to 3.5 V, RL = 50 kΩ, CL = 100 pF, Full range, VDD = 5 V | 7 |
| Input offset voltage | VIO | | 300 | 2500 | µV | TA = 25°C, VDD± = ±5 V | 8 |
| Input offset voltage | VIO | | | 3000 | µV | Full range (0°C to 70°C), VDD± = ±5 V | 8 |
| Input offset current | IIO | | | 100 | pA | Full range (0°C to 70°C), VDD± = ±5 V | 8 |
| Input bias current | IIB | | | 100 | pA | Full range (0°C to 70°C), VDD± = ±5 V | 8 |
| Common-mode input voltage range | VICR | -5 | | 4 | V | 25°C, RS = 50 Ω, /VIO/ ≤ 5 mV, VDD± = ±5 V | 8 |
| Common-mode input voltage range | VICR | -5 | | 3.5 | V | Full range, RS = 50 Ω, /VIO/ ≤ 5 mV, VDD± = ±5 V | 8 |
| Maximum positive peak output voltage | VOM+ | 4.85 | 4.94 | | V | IO = 100 µA, 25°C, VDD± = ±5 V | 8 |
| Maximum positive peak output voltage | VOM+ | 4.82 | | | V | IO = -100 µA, Full range, VDD± = ±5 V | 8 |
| Maximum positive peak output voltage | VOM+ | 4.7 | 4.85 | | V | IO = 400 µA, 25°C, VDD± = ±5 V | 8 |
| Maximum positive peak output voltage | VOM+ | 4.6 | | | V | IO = -400 µA, Full range, VDD± = ±5 V | 8 |
| Maximum negative peak output voltage | VOM- | | -4.91 | -4.85 | V | VIC = 0, IO = 500 µA, 25°C, VDD± = ±5 V | 8 |
| Maximum negative peak output voltage | VOM- | | | -4.85 | V | VIC = 0, IO = 500 µA, Full range, VDD± = ±5 V | 8 |
| Maximum negative peak output voltage | VOM- | | -4.8 | -4.7 | V | VIC = 0, IO = 1 A (as printed), 25°C, VDD± = ±5 V | 8 |
| Maximum negative peak output voltage | VOM- | | | -4.7 | V | VIC = 0, IO = 1 A (as printed), Full range, VDD± = ±5 V | 8 |
| Maximum negative peak output voltage | VOM- | | -4.3 | -4 | V | VIC = 0, IO = 4 A (as printed), 25°C, VDD± = ±5 V | 8 |
| Large-signal differential voltage amplification | AVD | 80 | 200 | | V/mV | RL = 50 kΩ, VO = ±4 V, 25°C, VDD± = ±5 V | 8 |
| Large-signal differential voltage amplification | AVD | 55 | | | V/mV | RL = 50 kΩ, VO = ±4 V, Full range, VDD± = ±5 V | 8 |
| Common-mode rejection ratio | CMRR | 75 | 88 | | dB | VIC = -5 V to 2.7 V, VO = 0 V, RS = 50 Ω, 25°C, VDD± = ±5 V | 8 |
| Supply-voltage rejection ratio | kSVR | 80 | 95 | | dB | VDD± = ±2.2 V to ±8 V, VIC = 0, No load, 25°C | 8 |
| Supply current | IDD | | 425 | 500 | µA | VO = 0 V, No load, 25°C, VDD± = ±5 V | 8 |
| Supply current | IDD | | | 500 | µA | VO = 0 V, No load, Full range, VDD± = ±5 V | 8 |
| Slew rate at unity gain | SR | | 0.35 | 0.55 | V/µs | VO = ±1.9 V, RL = 50 kΩ, CL = 100 pF, 25°C, VDD± = ±5 V | 9 |
| Slew rate at unity gain | SR | 0.3 | | | V/µs | VO = ±1.9 V, RL = 50 kΩ, CL = 100 pF, Full range, VDD± = ±5 V | 9 |
| Supply voltage | VDD± | 2.2 | | 8 | V | C suffix | 5 |
| Operating free-air temperature | TA | 0 | | 70 | °C | C suffix | 5 |
| Supply voltage | VDD+ | | | 8 | V | Voltages referenced to midpoint of VDD+ and VDD-, see Note 1 | 5 |
| Supply voltage | VDD- | -8 | | | V | Voltages referenced to midpoint of VDD+ and VDD-, see Note 1 | 5 |
| Differential input voltage | VID | -16 | | 16 | V | See Note 2 (IN+ with respect to IN-) | 5 |
| Input current (each input) | II | -5 | | 5 | mA | Each input | 5 |
| Output current | IO | -50 | | 50 | mA | | 5 |
| Total current into VDD+ | | | | 50 | mA | | 5 |
| Total current out of VDD- | | | | 50 | mA | | 5 |
| Operating free-air temperature range, C suffix | TA | 0 | | 70 | °C | C suffix | 5 |
| Storage temperature range | Tstg | -65 | | 150 | °C | | 5 |
| Lead temperature (P package) | | | | 260 | °C | 1,6 mm (1/16 inch) from case for 10 seconds, D, N, P, and PW packages | 5 |
| Continuous total power dissipation (P package) | PD | | | 1000 | mW | TA ≤ 25°C, P package; derate 8.0 mW/°C above TA = 25°C | 5 |
## CAD (KiCad official)
- Symbol: `TLC2262CP`
- Footprint: `Package_DIP:DIP-8_W7.62mm`
- 3D model: PDIP-8 (KiCad packages3D, STEP)
- 3D model files: `tlc2262cp-etched.step` / `tlc2262cp-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tlc2262cp.step` / `tlc2262cp.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/tlc2262.pdf) (80 pp, sha256 `94390a581849aaf8`, retrieved 2026-11-10, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tlc2262cp-datasheet.pdf)