main
Ray
tlc2201aidr: specified limits as data (metadata.characteristics, 60 rows from the datasheet)
2506fd1
TLC2201AIDR
Texas Instruments · Precision Op Amps · SOIC-8
TLC2201AIDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection. |
| 2 | IN- | input | Inverting input of the operational amplifier; absolute maximum input voltage is ±8 V and maximum input current is ±5 mA. |
| 3 | IN+ | input | Non-inverting input of the operational amplifier; absolute maximum input voltage is ±8 V and maximum input current is ±5 mA. |
| 4 | VDD-/GND | power_in | Negative supply pin (VDD-) for split-supply operation or ground reference for single-supply operation; absolute maximum rating is -8 V, recommended supply range is ±2.3 V to ±8 V (split supply). |
| 5 | NC | unconnected | No internal connection. |
| 6 | OUT | output | Amplifier output; maximum output current is ±50 mA, output swing rail-to-rail to within the specified VOM+/VOM- limits (e.g., 4.7 V to -4.7 V typ at RL = 10 kΩ, VDD± = ±5 V). |
| 7 | VDD+ | power_in | Positive supply pin; absolute maximum rating is 8 V, recommended operating range is ±2.3 V to ±8 V (split supply) or 4.6 V to 16 V (single supply). |
| 8 | NC | unconnected | No internal connection. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VIO | 80 | 200 | µV | VDD± = ±5 V, TA = 25°C | 19 | |
| Input offset voltage | VIO | 350 | µV | VDD± = ±5 V, full range (−40°C to 85°C) | 19 | ||
| Input offset current | IIO | 0.5 | 60 | pA | VIC = 0, RS = 50 Ω, TA = 25°C | 19 | |
| Input offset current | IIO | 150 | pA | VIC = 0, RS = 50 Ω, full range | 19 | ||
| Input bias current | IIB | 1 | 60 | pA | TA = 25°C | 19 | |
| Input bias current | IIB | 150 | pA | full range | 19 | ||
| Common-mode input voltage range | VICR | -5 | 2.7 | V | RS = 50 Ω, full range | 19 | |
| Maximum positive peak output voltage swing | VOM+ | 4.7 | 4.8 | V | RL = 10 kΩ, TA = 25°C | 19 | |
| Maximum positive peak output voltage swing | VOM+ | 4.7 | V | RL = 10 kΩ, full range | 19 | ||
| Maximum negative peak output voltage swing | VOM− | -4.9 | -4.7 | V | RL = 10 kΩ, TA = 25°C | 19 | |
| Maximum negative peak output voltage swing | VOM− | -4.7 | V | RL = 10 kΩ, full range | 19 | ||
| Large-signal differential voltage amplification | AVD | 400 | 560 | V/mV | VO = ±4 V, RL = 500 kΩ, TA = 25°C | 19 | |
| Large-signal differential voltage amplification | AVD | 250 | V/mV | VO = ±4 V, RL = 500 kΩ, full range | 19 | ||
| Large-signal differential voltage amplification | AVD | 90 | 100 | V/mV | VO = ±4 V, RL = 10 kΩ, TA = 25°C | 19 | |
| Large-signal differential voltage amplification | AVD | 65 | V/mV | VO = ±4 V, RL = 10 kΩ, full range | 19 | ||
| Common-mode rejection ratio | CMRR | 90 | 115 | dB | VIC = VICRmin, VO = 0, RS = 50 Ω, TA = 25°C | 19 | |
| Common-mode rejection ratio | CMRR | 85 | dB | VIC = VICRmin, VO = 0, RS = 50 Ω, full range | 19 | ||
| Supply voltage rejection ratio (ΔVDD±/ΔVIO) | kSVR | 90 | 110 | dB | VDD± = ±2.3 V to ±8 V, TA = 25°C | 19 | |
| Supply voltage rejection ratio (ΔVDD±/ΔVIO) | kSVR | 85 | dB | VDD± = ±2.3 V to ±8 V, full range | 19 | ||
| Supply current | IDD | 1.1 | 1.5 | mA | VO = 0, no load, TA = 25°C | 19 | |
| Supply current | IDD | 1.5 | mA | VO = 0, no load, full range | 19 | ||
| Slew rate at unity gain | SR | 2 | 2.7 | V/µs | VO = ±2.3 V, RL = 10 kΩ, CL = 100 pF, TA = 25°C | 20 | |
| Slew rate at unity gain | SR | 1.4 | V/µs | VO = ±2.3 V, RL = 10 kΩ, CL = 100 pF, full range | 20 | ||
| Equivalent input noise voltage | Vn | 18 | 35 | nV/√Hz | f = 10 Hz, TA = 25°C | 20 | |
| Equivalent input noise voltage | Vn | 8 | 15 | nV/√Hz | f = 1 kHz, TA = 25°C | 20 | |
| Input offset voltage | VIO | 80 | 200 | µV | VDD = 5 V, TA = 25°C | 22 | |
| Input offset voltage | VIO | 350 | µV | VDD = 5 V, full range | 22 | ||
| Input offset current | IIO | 0.5 | 60 | pA | VIC = 0, RS = 50 Ω, TA = 25°C | 22 | |
| Input offset current | IIO | 150 | pA | VIC = 0, RS = 50 Ω, full range | 22 | ||
| Input bias current | IIB | 1 | 60 | pA | TA = 25°C | 22 | |
| Input bias current | IIB | 150 | pA | full range | 22 | ||
| Common-mode input voltage range | VICR | 0 | 2.7 | V | RS = 50 Ω, full range | 22 | |
| Maximum high-level output voltage | VOH | 4.7 | 4.8 | V | RL = 10 kΩ, TA = 25°C | 22 | |
| Maximum high-level output voltage | VOH | 4.7 | V | RL = 10 kΩ, full range | 22 | ||
| Maximum low-level output voltage | VOL | 0 | 50 | mV | IO = 0, TA = 25°C | 22 | |
| Maximum low-level output voltage | VOL | 50 | mV | IO = 0, full range | 22 | ||
| Large-signal differential voltage amplification | AVD | 150 | 315 | V/mV | VO = 1 V to 4 V, RL = 500 kΩ, TA = 25°C | 22 | |
| Large-signal differential voltage amplification | AVD | 100 | V/mV | VO = 1 V to 4 V, RL = 500 kΩ, full range | 22 | ||
| Large-signal differential voltage amplification | AVD | 25 | 55 | V/mV | VO = 1 V to 4 V, RL = 10 kΩ, TA = 25°C | 22 | |
| Large-signal differential voltage amplification | AVD | 15 | V/mV | VO = 1 V to 4 V, RL = 10 kΩ, full range | 22 | ||
| Common-mode rejection ratio | CMRR | 90 | 110 | dB | VIC = VICRmin, VO = 0, RS = 50 Ω, TA = 25°C | 22 | |
| Common-mode rejection ratio | CMRR | 85 | dB | VIC = VICRmin, VO = 0, RS = 50 Ω, full range | 22 | ||
| Supply voltage rejection ratio (ΔVDD±/ΔVIO) | kSVR | 90 | 110 | dB | VDD = 4.6 V to 16 V, TA = 25°C | 22 | |
| Supply voltage rejection ratio (ΔVDD±/ΔVIO) | kSVR | 85 | dB | VDD = 4.6 V to 16 V, full range | 22 | ||
| Supply current | IDD | 1 | 1.5 | mA | VO = 2.5 V, no load, TA = 25°C | 22 | |
| Supply current | IDD | 1.5 | mA | VO = 2.5 V, no load, full range | 22 | ||
| Slew rate at unity gain | SR | 1.8 | 2.5 | V/µs | VO = 0.5 V to 2.5 V, RL = 10 kΩ, CL = 100 pF, TA = 25°C | 23 | |
| Slew rate at unity gain | SR | 1.2 | V/µs | VO = 0.5 V to 2.5 V, RL = 10 kΩ, CL = 100 pF, full range | 23 | ||
| Equivalent input noise voltage | Vn | 18 | 35 | nV/√Hz | f = 10 Hz, TA = 25°C | 23 | |
| Equivalent input noise voltage | Vn | 8 | 15 | nV/√Hz | f = 1 kHz, TA = 25°C | 23 | |
| Supply voltage, VDD± | VDD± | 2.3 | 8 | V | I suffix | 7 | |
| Operating free-air temperature | TA | -40 | 85 | °C | I suffix | 7 | |
| Supply voltage, VDD+ | VDD+ | 8 | V | see Note 1 | 7 | ||
| Supply voltage, VDD− | VDD− | -8 | V | see Note 1 | 7 | ||
| Differential input voltage | VID | -16 | 16 | V | see Note 2 | 7 | |
| Input voltage (any input) | VI | -8 | 8 | V | 7 | ||
| Input current (each input) | II | -5 | 5 | mA | 7 | ||
| Output current (each output) | IO | -50 | 50 | mA | 7 | ||
| Storage temperature range | -65 | 150 | °C | 7 | |||
| Continuous total dissipation, D-8 package | 725 | mW | TA ≤ 25°C | 7 |
CAD (KiCad official)
- Symbol:
TLC2201AIDR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
tlc2201aidr-etched.step/tlc2201aidr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlc2201aidr.step/tlc2201aidr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (75 pp, sha256
8125cf3cb9306abc, retrieved 2026-09-23, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TLC2201AIDR
**Texas Instruments** · Precision Op Amps · SOIC-8
TLC2201AIDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection. |
| 2 | IN- | input | Inverting input of the operational amplifier; absolute maximum input voltage is ±8 V and maximum input current is ±5 mA. |
| 3 | IN+ | input | Non-inverting input of the operational amplifier; absolute maximum input voltage is ±8 V and maximum input current is ±5 mA. |
| 4 | VDD-/GND | power_in | Negative supply pin (VDD-) for split-supply operation or ground reference for single-supply operation; absolute maximum rating is -8 V, recommended supply range is ±2.3 V to ±8 V (split supply). |
| 5 | NC | unconnected | No internal connection. |
| 6 | OUT | output | Amplifier output; maximum output current is ±50 mA, output swing rail-to-rail to within the specified VOM+/VOM- limits (e.g., 4.7 V to -4.7 V typ at RL = 10 kΩ, VDD± = ±5 V). |
| 7 | VDD+ | power_in | Positive supply pin; absolute maximum rating is 8 V, recommended operating range is ±2.3 V to ±8 V (split supply) or 4.6 V to 16 V (single supply). |
| 8 | NC | unconnected | No internal connection. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VIO | | 80 | 200 | µV | VDD± = ±5 V, TA = 25°C | 19 |
| Input offset voltage | VIO | | | 350 | µV | VDD± = ±5 V, full range (−40°C to 85°C) | 19 |
| Input offset current | IIO | | 0.5 | 60 | pA | VIC = 0, RS = 50 Ω, TA = 25°C | 19 |
| Input offset current | IIO | | | 150 | pA | VIC = 0, RS = 50 Ω, full range | 19 |
| Input bias current | IIB | | 1 | 60 | pA | TA = 25°C | 19 |
| Input bias current | IIB | | | 150 | pA | full range | 19 |
| Common-mode input voltage range | VICR | -5 | | 2.7 | V | RS = 50 Ω, full range | 19 |
| Maximum positive peak output voltage swing | VOM+ | 4.7 | 4.8 | | V | RL = 10 kΩ, TA = 25°C | 19 |
| Maximum positive peak output voltage swing | VOM+ | 4.7 | | | V | RL = 10 kΩ, full range | 19 |
| Maximum negative peak output voltage swing | VOM− | | -4.9 | -4.7 | V | RL = 10 kΩ, TA = 25°C | 19 |
| Maximum negative peak output voltage swing | VOM− | | | -4.7 | V | RL = 10 kΩ, full range | 19 |
| Large-signal differential voltage amplification | AVD | 400 | 560 | | V/mV | VO = ±4 V, RL = 500 kΩ, TA = 25°C | 19 |
| Large-signal differential voltage amplification | AVD | 250 | | | V/mV | VO = ±4 V, RL = 500 kΩ, full range | 19 |
| Large-signal differential voltage amplification | AVD | 90 | 100 | | V/mV | VO = ±4 V, RL = 10 kΩ, TA = 25°C | 19 |
| Large-signal differential voltage amplification | AVD | 65 | | | V/mV | VO = ±4 V, RL = 10 kΩ, full range | 19 |
| Common-mode rejection ratio | CMRR | 90 | 115 | | dB | VIC = VICRmin, VO = 0, RS = 50 Ω, TA = 25°C | 19 |
| Common-mode rejection ratio | CMRR | 85 | | | dB | VIC = VICRmin, VO = 0, RS = 50 Ω, full range | 19 |
| Supply voltage rejection ratio (ΔVDD±/ΔVIO) | kSVR | 90 | 110 | | dB | VDD± = ±2.3 V to ±8 V, TA = 25°C | 19 |
| Supply voltage rejection ratio (ΔVDD±/ΔVIO) | kSVR | 85 | | | dB | VDD± = ±2.3 V to ±8 V, full range | 19 |
| Supply current | IDD | | 1.1 | 1.5 | mA | VO = 0, no load, TA = 25°C | 19 |
| Supply current | IDD | | | 1.5 | mA | VO = 0, no load, full range | 19 |
| Slew rate at unity gain | SR | 2 | 2.7 | | V/µs | VO = ±2.3 V, RL = 10 kΩ, CL = 100 pF, TA = 25°C | 20 |
| Slew rate at unity gain | SR | 1.4 | | | V/µs | VO = ±2.3 V, RL = 10 kΩ, CL = 100 pF, full range | 20 |
| Equivalent input noise voltage | Vn | | 18 | 35 | nV/√Hz | f = 10 Hz, TA = 25°C | 20 |
| Equivalent input noise voltage | Vn | | 8 | 15 | nV/√Hz | f = 1 kHz, TA = 25°C | 20 |
| Input offset voltage | VIO | | 80 | 200 | µV | VDD = 5 V, TA = 25°C | 22 |
| Input offset voltage | VIO | | | 350 | µV | VDD = 5 V, full range | 22 |
| Input offset current | IIO | | 0.5 | 60 | pA | VIC = 0, RS = 50 Ω, TA = 25°C | 22 |
| Input offset current | IIO | | | 150 | pA | VIC = 0, RS = 50 Ω, full range | 22 |
| Input bias current | IIB | | 1 | 60 | pA | TA = 25°C | 22 |
| Input bias current | IIB | | | 150 | pA | full range | 22 |
| Common-mode input voltage range | VICR | 0 | | 2.7 | V | RS = 50 Ω, full range | 22 |
| Maximum high-level output voltage | VOH | 4.7 | 4.8 | | V | RL = 10 kΩ, TA = 25°C | 22 |
| Maximum high-level output voltage | VOH | 4.7 | | | V | RL = 10 kΩ, full range | 22 |
| Maximum low-level output voltage | VOL | | 0 | 50 | mV | IO = 0, TA = 25°C | 22 |
| Maximum low-level output voltage | VOL | | | 50 | mV | IO = 0, full range | 22 |
| Large-signal differential voltage amplification | AVD | 150 | 315 | | V/mV | VO = 1 V to 4 V, RL = 500 kΩ, TA = 25°C | 22 |
| Large-signal differential voltage amplification | AVD | 100 | | | V/mV | VO = 1 V to 4 V, RL = 500 kΩ, full range | 22 |
| Large-signal differential voltage amplification | AVD | 25 | 55 | | V/mV | VO = 1 V to 4 V, RL = 10 kΩ, TA = 25°C | 22 |
| Large-signal differential voltage amplification | AVD | 15 | | | V/mV | VO = 1 V to 4 V, RL = 10 kΩ, full range | 22 |
| Common-mode rejection ratio | CMRR | 90 | 110 | | dB | VIC = VICRmin, VO = 0, RS = 50 Ω, TA = 25°C | 22 |
| Common-mode rejection ratio | CMRR | 85 | | | dB | VIC = VICRmin, VO = 0, RS = 50 Ω, full range | 22 |
| Supply voltage rejection ratio (ΔVDD±/ΔVIO) | kSVR | 90 | 110 | | dB | VDD = 4.6 V to 16 V, TA = 25°C | 22 |
| Supply voltage rejection ratio (ΔVDD±/ΔVIO) | kSVR | 85 | | | dB | VDD = 4.6 V to 16 V, full range | 22 |
| Supply current | IDD | | 1 | 1.5 | mA | VO = 2.5 V, no load, TA = 25°C | 22 |
| Supply current | IDD | | | 1.5 | mA | VO = 2.5 V, no load, full range | 22 |
| Slew rate at unity gain | SR | 1.8 | 2.5 | | V/µs | VO = 0.5 V to 2.5 V, RL = 10 kΩ, CL = 100 pF, TA = 25°C | 23 |
| Slew rate at unity gain | SR | 1.2 | | | V/µs | VO = 0.5 V to 2.5 V, RL = 10 kΩ, CL = 100 pF, full range | 23 |
| Equivalent input noise voltage | Vn | | 18 | 35 | nV/√Hz | f = 10 Hz, TA = 25°C | 23 |
| Equivalent input noise voltage | Vn | | 8 | 15 | nV/√Hz | f = 1 kHz, TA = 25°C | 23 |
| Supply voltage, VDD± | VDD± | 2.3 | | 8 | V | I suffix | 7 |
| Operating free-air temperature | TA | -40 | | 85 | °C | I suffix | 7 |
| Supply voltage, VDD+ | VDD+ | | | 8 | V | see Note 1 | 7 |
| Supply voltage, VDD− | VDD− | -8 | | | V | see Note 1 | 7 |
| Differential input voltage | VID | -16 | | 16 | V | see Note 2 | 7 |
| Input voltage (any input) | VI | -8 | | 8 | V | | 7 |
| Input current (each input) | II | -5 | | 5 | mA | | 7 |
| Output current (each output) | IO | -50 | | 50 | mA | | 7 |
| Storage temperature range | | -65 | | 150 | °C | | 7 |
| Continuous total dissipation, D-8 package | | | | 725 | mW | TA ≤ 25°C | 7 |
## CAD (KiCad official)
- Symbol: `TLC2201AIDR`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `tlc2201aidr-etched.step` / `tlc2201aidr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tlc2201aidr.step` / `tlc2201aidr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/tlc2201a.pdf) (75 pp, sha256 `8125cf3cb9306abc`, retrieved 2026-09-23, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tlc2201aidr-datasheet.pdf)