TLC082QDGNRQ1

{
  "slug": "tlc082qdgnrq1",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Operational Amplifier, HVSSOP-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "amplifiers-comparators",
    "tlc082qdgnrq1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tlc082qdgnrq1.kicad_sym",
    "tlc082qdgnrq1.kicad_mod",
    "tlc082qdgnrq1.glb",
    "tlc082qdgnrq1.step",
    "tlc082qdgnrq1.lbr",
    "docs/hero.png",
    "docs/tlc082qdgnrq1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tlc082qdgnrq1-hero.glb",
    "tlc082qdgnrq1-hero.overlay.json"
  ],
  "component": {
    "mpn": "TLC082QDGNRQ1",
    "manufacturer": "Texas Instruments",
    "package": "HVSSOP-8-EP",
    "pin_count": 9,
    "category": "Amplifiers/Comparators",
    "subcategory": "Operational Amplifier",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tlc082-q1",
    "parts": {
      "symbol": "tlc082qdgnrq1.kicad_sym",
      "footprint": "tlc082qdgnrq1.kicad_mod",
      "model_3d": "tlc082qdgnrq1-hero.glb",
      "model_3d_plain": "tlc082qdgnrq1.glb",
      "model_3d_step": "tlc082qdgnrq1-etched.step",
      "model_3d_step_plain": "tlc082qdgnrq1.step",
      "lbr": "tlc082qdgnrq1.lbr"
    },
    "distributor_links": {
      "lcsc": "C2058056",
      "digikey": "296-28818-2-ND",
      "mouser": "595-TLC082QDGNRQ1"
    },
    "distributor_check": {
      "checked_at": "2026-10-11T05:31:51Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-28818-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TLC082QDGNRQ1",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "1OUT",
        "type": "output",
        "description": "Channel 1 amplifier output; the datasheet gives IOH of 57 mA (VDD = 5 V, output 1.5 V from the positive rail) and IOL of 55 mA (output 0.5 V from the negative rail)."
      },
      {
        "number": "2",
        "name": "1IN–",
        "type": "input",
        "description": "Channel 1 inverting input; the common-mode input range is GND to VDD − 2 V under the recommended operating conditions."
      },
      {
        "number": "3",
        "name": "1IN+",
        "type": "input",
        "description": "Channel 1 non-inverting input; the common-mode input range is GND to VDD − 2 V under the recommended operating conditions."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Negative supply rail (lowest potential) that serves as the reference for all voltages; the thermal pad must be soldered and connected to this potential."
      },
      {
        "number": "5",
        "name": "2IN+",
        "type": "input",
        "description": "Channel 2 non-inverting input; the common-mode input range is GND to VDD − 2 V under the recommended operating conditions."
      },
      {
        "number": "6",
        "name": "2IN–",
        "type": "input",
        "description": "Channel 2 inverting input; the common-mode input range is GND to VDD − 2 V under the recommended operating conditions."
      },
      {
        "number": "7",
        "name": "2OUT",
        "type": "output",
        "description": "Channel 2 amplifier output; the datasheet gives IOH of 57 mA (VDD = 5 V, output 1.5 V from the positive rail) and IOL of 55 mA (output 0.5 V from the negative rail)."
      },
      {
        "number": "8",
        "name": "VDD",
        "type": "power_in",
        "description": "Positive supply (highest potential); the recommended single-supply range is 4.5 V to 16 V and the absolute maximum is 17 V referenced to GND."
      },
      {
        "number": "9",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The DGN package has an exposed thermal pad on the underside. The datasheet does not assign it a pin ; The datasheet pin table lists VDD with the type 'I'. It was mapped to KiCad power_in, consistent wit; The DGN pinout was taken from the 8-pin pin-configuration figure and pin-function table on page 3, a",
          "exposed pad 9 added from the footprint"
        ],
        "pages_sent": 12,
        "cost_usd": 0.0627,
        "at": "2026-10-11T05:31:32"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tlc082-q1",
        "pages": 38,
        "sha256": "39e5836e7af4cafe",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tlc082qdgnrq1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.91,
          3.0,
          1.0
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "a29c2596e1daef70e98224f5ee5e92bf10209c7c33505f5fb308da367fd8a145",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tlc082qdgnrq1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.91,
          3.0,
          1.0
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b80f64731b740958d1f45d123d3046e5432fa483c05c92479be786141bedeed6",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}