main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs tlc0820aidwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tlc0820aidwr: viewers · Ray
package.json tlc0820aidwr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json tlc0820aidwr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/tlc0820aidwr · Ray
tlc0820aidwr-etched.fit.json tlc0820aidwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tlc0820aidwr-etched.glb tlc0820aidwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tlc0820aidwr-etched.step tlc0820aidwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tlc0820aidwr.glb Publish 0.1.0 · Ray
tlc0820aidwr.kicad_mod Publish 0.1.0 · Ray
tlc0820aidwr.kicad_sym Publish 0.1.0 · Ray
tlc0820aidwr.lbr Publish 0.1.0 · Ray
tlc0820aidwr.step Publish 0.1.0 · Ray

TLC0820AIDWR

Texas Instruments · Analog To Digital Converters (ADC) · SOIC-20-300mil

TLC0820AIDWR from Texas Instruments, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ANLG IN input Analog input accepts voltages from -0.1 V to VCC + 0.1 V for A/D conversion.
2 D0 tri_state 3-state output for digital data bit 1 (LSB).
3 D1 tri_state 3-state output for digital data bit 2.
4 D2 tri_state 3-state output for digital data bit 3.
5 D3 tri_state 3-state output for digital data bit 4.
6 WR/RDY bidirectional Write input in write-read mode or ready open-drain output in read mode; requires external pullup resistor.
7 MODE input Mode select input; low selects read mode, high selects write-read mode; internally pulled to GND with 50 µA current source.
8 RD input Read input; activates data outputs in write-read mode or initiates conversion in read mode when CS is low.
9 INT output Interrupt output goes low when conversion completes (typically 800 ns after WR rising edge) and is reset by CS or RD rising edge.
10 GND power_in Ground reference potential.
11 REF- input Negative reference voltage input placed on resistor ladder bottom; defines full-scale range with REF+; valid range GND to REF+.
12 REF+ input Positive reference voltage input placed on resistor ladder top; defines full-scale range with REF-; valid range REF- to VCC.
13 CS input Chip select input; must be low to enable RD or WR commands; resets INT on rising edge.
14 D4 tri_state 3-state output for digital data bit 5.
15 D5 tri_state 3-state output for digital data bit 6.
16 D6 tri_state 3-state output for digital data bit 7.
17 D7 tri_state 3-state output for digital data bit 8 (MSB).
18 OFLW output Overflow indicator output; normally high, goes low at end of conversion if analog input exceeds Vref+.
19 NC unconnected No internal connection.
20 VCC power_in Power supply voltage; recommended operating range 4.5 V to 8 V with decoupling capacitors.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-20-300mil
Category Data Acquisition
Pins 20

CAD (KiCad official)

  • Symbol: TLC0820AIDWR
  • Footprint: Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm
  • 3D model: SOIC-20-300mil (KiCad packages3D, STEP)
  • 3D model files: tlc0820aidwr-etched.step / tlc0820aidwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlc0820aidwr.step / tlc0820aidwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (27 pp, sha256 917edde6a8b5098a, retrieved 2026-09-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF