component
TLC0820AIDWR
Public Made by Adomby adom
Texas Instruments Analog To Digital Converters (ADC), SOIC-20-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+56@@ -0,0 +1,56 @@+# TLC0820AIDWR++**Texas Instruments** · Analog To Digital Converters (ADC) · SOIC-20-300mil++TLC0820AIDWR from Texas Instruments, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | ANLG IN | input | Analog input accepts voltages from -0.1 V to VCC + 0.1 V for A/D conversion. |+| 2 | D0 | tri_state | 3-state output for digital data bit 1 (LSB). |+| 3 | D1 | tri_state | 3-state output for digital data bit 2. |+| 4 | D2 | tri_state | 3-state output for digital data bit 3. |+| 5 | D3 | tri_state | 3-state output for digital data bit 4. |+| 6 | WR/RDY | bidirectional | Write input in write-read mode or ready open-drain output in read mode; requires external pullup resistor. |+| 7 | MODE | input | Mode select input; low selects read mode, high selects write-read mode; internally pulled to GND with 50 µA current source. |+| 8 | RD | input | Read input; activates data outputs in write-read mode or initiates conversion in read mode when CS is low. |+| 9 | INT | output | Interrupt output goes low when conversion completes (typically 800 ns after WR rising edge) and is reset by CS or RD rising edge. |+| 10 | GND | power_in | Ground reference potential. |+| 11 | REF- | input | Negative reference voltage input placed on resistor ladder bottom; defines full-scale range with REF+; valid range GND to REF+. |+| 12 | REF+ | input | Positive reference voltage input placed on resistor ladder top; defines full-scale range with REF-; valid range REF- to VCC. |+| 13 | CS | input | Chip select input; must be low to enable RD or WR commands; resets INT on rising edge. |+| 14 | D4 | tri_state | 3-state output for digital data bit 5. |+| 15 | D5 | tri_state | 3-state output for digital data bit 6. |+| 16 | D6 | tri_state | 3-state output for digital data bit 7. |+| 17 | D7 | tri_state | 3-state output for digital data bit 8 (MSB). |+| 18 | OFLW | output | Overflow indicator output; normally high, goes low at end of conversion if analog input exceeds Vref+. |+| 19 | NC | unconnected | No internal connection. |+| 20 | VCC | power_in | Power supply voltage; recommended operating range 4.5 V to 8 V with decoupling capacitors. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-20-300mil |+| Category | Data Acquisition |+| Pins | 20 |++## CAD (KiCad official)++- Symbol: `TLC0820AIDWR`+- Footprint: `Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm`+- 3D model: SOIC-20-300mil (KiCad packages3D, STEP)+- 3D model files: `tlc0820aidwr-etched.step` / `tlc0820aidwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tlc0820aidwr.step` / `tlc0820aidwr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tlc0820a) (27 pp, sha256 `917edde6a8b5098a`, retrieved 2026-09-23, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tlc0820aidwr-datasheet.pdf)
page.jsonadded+213@@ -0,0 +1,213 @@+{+ "slug": "tlc0820aidwr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Analog To Digital Converters (ADC), SOIC-20-300mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "data acquisition",+ "tlc0820aidwr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tlc0820aidwr.kicad_sym",+ "tlc0820aidwr.kicad_mod",+ "tlc0820aidwr.glb",+ "tlc0820aidwr.step",+ "tlc0820aidwr.lbr",+ "docs/hero.png",+ "docs/tlc0820aidwr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "TLC0820AIDWR",+ "manufacturer": "Texas Instruments",+ "package": "SOIC-20-300mil",+ "pin_count": 20,+ "category": "Data Acquisition",+ "subcategory": "Analog To Digital Converters (ADC)",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tlc0820a",+ "parts": {+ "symbol": "tlc0820aidwr.kicad_sym",+ "footprint": "tlc0820aidwr.kicad_mod",+ "model_3d": "tlc0820aidwr-etched.glb",+ "model_3d_plain": "tlc0820aidwr.glb",+ "model_3d_step": "tlc0820aidwr-etched.step",+ "model_3d_step_plain": "tlc0820aidwr.step",+ "lbr": "tlc0820aidwr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2670327"+ },+ "pins": [+ {+ "number": "1",+ "name": "ANLG IN",+ "type": "input",+ "description": "Analog input accepts voltages from -0.1 V to VCC + 0.1 V for A/D conversion."+ },+ {+ "number": "2",+ "name": "D0",+ "type": "tri_state",+ "description": "3-state output for digital data bit 1 (LSB)."+ },+ {+ "number": "3",+ "name": "D1",+ "type": "tri_state",+ "description": "3-state output for digital data bit 2."+ },+ {+ "number": "4",+ "name": "D2",+ "type": "tri_state",+ "description": "3-state output for digital data bit 3."+ },+ {+ "number": "5",+ "name": "D3",+ "type": "tri_state",+ "description": "3-state output for digital data bit 4."+ },+ {+ "number": "6",+ "name": "WR/RDY",+ "type": "bidirectional",+ "description": "Write input in write-read mode or ready open-drain output in read mode; requires external pullup resistor."+ },+ {+ "number": "7",+ "name": "MODE",+ "type": "input",+ "description": "Mode select input; low selects read mode, high selects write-read mode; internally pulled to GND with 50 µA current source."+ },+ {+ "number": "8",+ "name": "RD",+ "type": "input",+ "description": "Read input; activates data outputs in write-read mode or initiates conversion in read mode when CS is low."+ },+ {+ "number": "9",+ "name": "INT",+ "type": "output",+ "description": "Interrupt output goes low when conversion completes (typically 800 ns after WR rising edge) and is reset by CS or RD rising edge."+ },+ {+ "number": "10",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference potential."+ },+ {+ "number": "11",+ "name": "REF-",+ "type": "input",+ "description": "Negative reference voltage input placed on resistor ladder bottom; defines full-scale range with REF+; valid range GND to REF+."+ },+ {+ "number": "12",+ "name": "REF+",+ "type": "input",+ "description": "Positive reference voltage input placed on resistor ladder top; defines full-scale range with REF-; valid range REF- to VCC."+ },+ {+ "number": "13",+ "name": "CS",+ "type": "input",+ "description": "Chip select input; must be low to enable RD or WR commands; resets INT on rising edge."+ },+ {+ "number": "14",+ "name": "D4",+ "type": "tri_state",+ "description": "3-state output for digital data bit 5."+ },+ {+ "number": "15",+ "name": "D5",+ "type": "tri_state",+ "description": "3-state output for digital data bit 6."+ },+ {+ "number": "16",+ "name": "D6",+ "type": "tri_state",+ "description": "3-state output for digital data bit 7."+ },+ {+ "number": "17",+ "name": "D7",+ "type": "tri_state",+ "description": "3-state output for digital data bit 8 (MSB)."+ },+ {+ "number": "18",+ "name": "OFLW",+ "type": "output",+ "description": "Overflow indicator output; normally high, goes low at end of conversion if analog input exceeds Vref+."+ },+ {+ "number": "19",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection."+ },+ {+ "number": "20",+ "name": "VCC",+ "type": "power_in",+ "description": "Power supply voltage; recommended operating range 4.5 V to 8 V with decoupling capacitors."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [],+ "pages_sent": 27,+ "cost_usd": 0.2791,+ "at": "2026-09-23T08:17:11"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tlc0820a",+ "pages": 27,+ "sha256": "917edde6a8b5098a",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 20,+ "described": 20,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}