component
TLC071CDR
Public Made by Adomby adom
Texas Instruments Operational Amplifier, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTLC071CDR
Texas Instruments · Operational Amplifier · SOIC-8
TLC071CDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NULL | passive | Offset null pin, used with an external trim network to null the input offset voltage. |
| 2 | IN− | input | Inverting input of the operational amplifier; common-mode input range is 0.5 V to VDD−0.8 V. |
| 3 | IN+ | input | Non-inverting input of the operational amplifier; common-mode input range is 0.5 V to VDD−0.8 V. |
| 4 | GND | power_in | Ground (negative supply) terminal; all voltages except differential are referenced to it. |
| 5 | NULL | passive | Offset null pin, used with an external trim network to null the input offset voltage. |
| 6 | OUT | output | Amplifier output with high drive capability (IOH 57 mA at VDD−1.5 V, IOL 55 mA at 0.5 V). |
| 7 | VDD | power_in | Positive supply terminal; single supply range 4.5 V to 16 V, absolute maximum 17 V. |
| 8 | NC | unconnected | No internal connection. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
TLC071CDR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
tlc071cdr-etched.step/tlc071cdr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlc071cdr.step/tlc071cdr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (63 pp, sha256
2b857c44b0fa259b, retrieved 2026-10-06, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).