← Commit history

Initial commit: component/tla2518irter

Ray ·f867569a2d ·
2 files changed +251
README.mdadded+54
@@ -0,0 +1,54 @@+# TLA2518IRTER++**Texas Instruments** · Analog To Digital Converters (ADC) · WQFN-16-EP(3x3)++TLA2518IRTER from Texas Instruments, in a WQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | AIN2/GPIO2 | bidirectional | Analog input channel 2 with 0 to AVDD V range or configurable as digital input/output. |+| 2 | AIN3/GPIO3 | bidirectional | Analog input channel 3 with 0 to AVDD V range or configurable as digital input/output. |+| 3 | AIN4/GPIO4 | bidirectional | Analog input channel 4 with 0 to AVDD V range or configurable as digital input/output. |+| 4 | AIN5/GPIO5 | bidirectional | Analog input channel 5 with 0 to AVDD V range or configurable as digital input/output. |+| 5 | AIN6/GPIO6 | bidirectional | Analog input channel 6 with 0 to AVDD V range or configurable as digital input/output. |+| 6 | AIN7/GPIO7 | bidirectional | Analog input channel 7 with 0 to AVDD V range or configurable as digital input/output. |+| 7 | AVDD | power_in | Analog supply voltage input 2.35 to 5.5 V; also used as ADC reference voltage. |+| 8 | DECAP | power_in | Decoupling capacitor connection for internal power supply; requires 0.1 to 1 µF ceramic capacitor. |+| 9 | GND | power_in | Ground reference for analog and digital signals. |+| 10 | DVDD | power_in | Digital supply voltage input 1.65 to 5.5 V for SPI interface and GPIO circuits. |+| 11 | CS | input | Chip-select active-low digital input; device controls data bus when CS low and conversion starts on CS rising edge. |+| 12 | SDO | output | Serial data output MSB first; goes high-impedance when CS is high. |+| 13 | SCLK | input | Serial clock digital input for SPI interface supporting maximum 60 MHz frequency. |+| 14 | SDI | input | Serial data input digital signal for SPI interface with 1.5 ns setup and 2 ns hold time. |+| 15 | AIN0/GPIO0 | bidirectional | Analog input channel 0 with 0 to AVDD V range or configurable as digital input/output. |+| 16 | AIN1/GPIO1 | bidirectional | Analog input channel 1 with 0 to AVDD V range or configurable as digital input/output. |+| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | WQFN-16-EP(3x3) |+| Category | Data Acquisition |+| Pins | 17 |++## CAD (KiCad official)++- Symbol: `TLA2518IRTER`+- Footprint: `Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm`+- 3D model: WQFN-16-EP(3x3) (KiCad packages3D, STEP)+- 3D model files: `tla2518irter-etched.step` / `tla2518irter-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tla2518irter.step` / `tla2518irter.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tla2518) (43 pp, sha256 `1426341000405282`, retrieved 2026-09-24, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tla2518irter-datasheet.pdf)
page.jsonadded+197
@@ -0,0 +1,197 @@+{+  "slug": "tla2518irter",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Analog To Digital Converters (ADC), WQFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "data acquisition",+    "tla2518irter",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tla2518irter.kicad_sym",+    "tla2518irter.kicad_mod",+    "tla2518irter.glb",+    "tla2518irter.step",+    "tla2518irter.lbr",+    "docs/hero.png",+    "docs/tla2518irter-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "TLA2518IRTER",+    "manufacturer": "Texas Instruments",+    "package": "WQFN-16-EP(3x3)",+    "pin_count": 17,+    "category": "Data Acquisition",+    "subcategory": "Analog To Digital Converters (ADC)",+    "datasheet": "https://www.ti.com/cn/lit/gpn/tla2518",+    "parts": {+      "symbol": "tla2518irter.kicad_sym",+      "footprint": "tla2518irter.kicad_mod",+      "model_3d": "tla2518irter-etched.glb",+      "model_3d_plain": "tla2518irter.glb",+      "model_3d_step": "tla2518irter-etched.step",+      "model_3d_step_plain": "tla2518irter.step",+      "lbr": "tla2518irter.lbr"+    },+    "distributor_links": {+      "lcsc": "C1855741"+    },+    "pins": [+      {+        "number": "1",+        "name": "AIN2/GPIO2",+        "type": "bidirectional",+        "description": "Analog input channel 2 with 0 to AVDD V range or configurable as digital input/output."+      },+      {+        "number": "2",+        "name": "AIN3/GPIO3",+        "type": "bidirectional",+        "description": "Analog input channel 3 with 0 to AVDD V range or configurable as digital input/output."+      },+      {+        "number": "3",+        "name": "AIN4/GPIO4",+        "type": "bidirectional",+        "description": "Analog input channel 4 with 0 to AVDD V range or configurable as digital input/output."+      },+      {+        "number": "4",+        "name": "AIN5/GPIO5",+        "type": "bidirectional",+        "description": "Analog input channel 5 with 0 to AVDD V range or configurable as digital input/output."+      },+      {+        "number": "5",+        "name": "AIN6/GPIO6",+        "type": "bidirectional",+        "description": "Analog input channel 6 with 0 to AVDD V range or configurable as digital input/output."+      },+      {+        "number": "6",+        "name": "AIN7/GPIO7",+        "type": "bidirectional",+        "description": "Analog input channel 7 with 0 to AVDD V range or configurable as digital input/output."+      },+      {+        "number": "7",+        "name": "AVDD",+        "type": "power_in",+        "description": "Analog supply voltage input 2.35 to 5.5 V; also used as ADC reference voltage."+      },+      {+        "number": "8",+        "name": "DECAP",+        "type": "power_in",+        "description": "Decoupling capacitor connection for internal power supply; requires 0.1 to 1 µF ceramic capacitor."+      },+      {+        "number": "9",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference for analog and digital signals."+      },+      {+        "number": "10",+        "name": "DVDD",+        "type": "power_in",+        "description": "Digital supply voltage input 1.65 to 5.5 V for SPI interface and GPIO circuits."+      },+      {+        "number": "11",+        "name": "CS",+        "type": "input",+        "description": "Chip-select active-low digital input; device controls data bus when CS low and conversion starts on CS rising edge."+      },+      {+        "number": "12",+        "name": "SDO",+        "type": "output",+        "description": "Serial data output MSB first; goes high-impedance when CS is high."+      },+      {+        "number": "13",+        "name": "SCLK",+        "type": "input",+        "description": "Serial clock digital input for SPI interface supporting maximum 60 MHz frequency."+      },+      {+        "number": "14",+        "name": "SDI",+        "type": "input",+        "description": "Serial data input digital signal for SPI interface with 1.5 ns setup and 2 ns hold time."+      },+      {+        "number": "15",+        "name": "AIN0/GPIO0",+        "type": "bidirectional",+        "description": "Analog input channel 0 with 0 to AVDD V range or configurable as digital input/output."+      },+      {+        "number": "16",+        "name": "AIN1/GPIO1",+        "type": "bidirectional",+        "description": "Analog input channel 1 with 0 to AVDD V range or configurable as digital input/output."+      },+      {+        "number": "17",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "exposed pad 17 added from the footprint"+        ],+        "pages_sent": 43,+        "cost_usd": 0.3778,+        "at": "2026-09-24T03:57:55"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/tla2518",+        "pages": 43,+        "sha256": "1426341000405282",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 17,+        "described": 17,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file