component
TLA2518IRTER
Public Made by Adomby adom
Texas Instruments Analog To Digital Converters (ADC), WQFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTLA2518IRTER
Texas Instruments · Analog To Digital Converters (ADC) · WQFN-16-EP(3x3)
TLA2518IRTER from Texas Instruments, in a WQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AIN2/GPIO2 | bidirectional | Analog input channel 2 with 0 to AVDD V range or configurable as digital input/output. |
| 2 | AIN3/GPIO3 | bidirectional | Analog input channel 3 with 0 to AVDD V range or configurable as digital input/output. |
| 3 | AIN4/GPIO4 | bidirectional | Analog input channel 4 with 0 to AVDD V range or configurable as digital input/output. |
| 4 | AIN5/GPIO5 | bidirectional | Analog input channel 5 with 0 to AVDD V range or configurable as digital input/output. |
| 5 | AIN6/GPIO6 | bidirectional | Analog input channel 6 with 0 to AVDD V range or configurable as digital input/output. |
| 6 | AIN7/GPIO7 | bidirectional | Analog input channel 7 with 0 to AVDD V range or configurable as digital input/output. |
| 7 | AVDD | power_in | Analog supply voltage input 2.35 to 5.5 V; also used as ADC reference voltage. |
| 8 | DECAP | power_in | Decoupling capacitor connection for internal power supply; requires 0.1 to 1 µF ceramic capacitor. |
| 9 | GND | power_in | Ground reference for analog and digital signals. |
| 10 | DVDD | power_in | Digital supply voltage input 1.65 to 5.5 V for SPI interface and GPIO circuits. |
| 11 | CS | input | Chip-select active-low digital input; device controls data bus when CS low and conversion starts on CS rising edge. |
| 12 | SDO | output | Serial data output MSB first; goes high-impedance when CS is high. |
| 13 | SCLK | input | Serial clock digital input for SPI interface supporting maximum 60 MHz frequency. |
| 14 | SDI | input | Serial data input digital signal for SPI interface with 1.5 ns setup and 2 ns hold time. |
| 15 | AIN0/GPIO0 | bidirectional | Analog input channel 0 with 0 to AVDD V range or configurable as digital input/output. |
| 16 | AIN1/GPIO1 | bidirectional | Analog input channel 1 with 0 to AVDD V range or configurable as digital input/output. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WQFN-16-EP(3x3) |
| Category | Data Acquisition |
| Pins | 17 |
CAD (KiCad official)
- Symbol:
TLA2518IRTER - Footprint:
Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: WQFN-16-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
tla2518irter-etched.step/tla2518irter-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tla2518irter.step/tla2518irter.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (43 pp, sha256
1426341000405282, retrieved 2026-09-24, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).