TL7712AIDR

{
  "slug": "tl7712aidr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Supervisor And Reset ICs, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "tl7712aidr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tl7712aidr.kicad_sym",
    "tl7712aidr.kicad_mod",
    "tl7712aidr.glb",
    "tl7712aidr.step",
    "tl7712aidr.lbr",
    "docs/hero.png",
    "docs/tl7712aidr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tl7712aidr-hero.glb",
    "tl7712aidr-hero.overlay.json"
  ],
  "component": {
    "mpn": "TL7712AIDR",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Power Management (PMIC)",
    "subcategory": "Supervisor And Reset ICs",
    "datasheet": "https://www.ti.com/lit/ds/symlink/tl7712a.pdf",
    "parts": {
      "symbol": "tl7712aidr.kicad_sym",
      "footprint": "tl7712aidr.kicad_mod",
      "model_3d": "tl7712aidr-hero.glb",
      "model_3d_plain": "tl7712aidr.glb",
      "model_3d_step": "tl7712aidr-etched.step",
      "model_3d_step_plain": "tl7712aidr.step",
      "lbr": "tl7712aidr.lbr"
    },
    "distributor_links": {
      "lcsc": "C702054",
      "digikey": "296-28683-2-ND",
      "mouser": "595-TL7712AIDR"
    },
    "distributor_check": {
      "checked_at": "2026-10-08T21:40:41Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-28683-2-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-TL7712AIDR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "REF",
        "type": "output",
        "description": "Voltage reference output of the supervisor; the datasheet gives no electrical limit for this pin."
      },
      {
        "number": "2",
        "name": "RESIN",
        "type": "input",
        "description": "Reset input; recommended VIH is 2 V minimum and VIL is 0.6 V maximum."
      },
      {
        "number": "3",
        "name": "CT",
        "type": "bidirectional",
        "description": "External timing-capacitor pin that sets the reset delay time; the datasheet gives no voltage limit for this pin."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground; all voltages in the datasheet are referenced to GND."
      },
      {
        "number": "5",
        "name": "RESET",
        "type": "output",
        "description": "Inverted supervisor reset output (active high when RESET is low); recommended IOL/IOH is ±16 mA and absolute maximum is ±30 mA."
      },
      {
        "number": "6",
        "name": "RESET",
        "type": "output",
        "description": "Supervisor reset output that goes active (low) on power-up below the threshold and on undervoltage at SENSE; recommended IOH is -16 mA and IOL is 16 mA, absolute maximum ±30 mA."
      },
      {
        "number": "7",
        "name": "SENSE",
        "type": "input",
        "description": "Undervoltage sense input; for the TL7712A the recommended input voltage range is 0 V to 20 V and the absolute maximum range is -0.3 V to 20 V."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage pin; recommended supply range is 3.5 V to 18 V and absolute maximum is 20 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pinout is taken from the D (SOIC) package figure and table on page 3, which is listed for TL7702A, T; The overbar on RESET (pin 5) and RESET (pin 6) was lost in text extraction. Pin 5 is the inverted ou; Pin 6 and pin 5 descriptions combine the Pin Functions table with the Description section; the datas"
        ],
        "pages_sent": 9,
        "cost_usd": 0.0648,
        "at": "2026-10-08T21:39:59"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/tl7712a.pdf",
        "pages": 29,
        "sha256": "520a7378835d9638",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tl7712aidr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tl7712aidr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "922e1bf9b2d38c13d3f37be2c677008ee83d740ae6749053e31d000bee430f7e",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}