component
TL7700CPW
Public Made by Adomby adom
Texas Instruments Monitors & Reset Circuits, TSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTL7700CPW
Texas Instruments · Monitors & Reset Circuits · TSSOP-8
TL7700CPW from Texas Instruments, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CT | bidirectional | Timing-capacitor connection that sets the RESET output pulse duration (tpo) through an internal 15-µA constant-current source; no external voltage may be applied, so drive it with an open-collector transistor, FET, or 3-state buffer. |
| 2 | SENSE | input | Voltage-sense input with a 500 mV typical threshold, temperature compensated, where two external resistors set the sense voltage and hysteresis. |
| 3 | NC | unconnected | No internal connection. |
| 4 | GND | power_in | Ground; keep this terminal as low impedance as possible to reduce circuit noise. |
| 5 | VCC | power_in | Power supply input, specified for an operating voltage range of 1.8 V to 40 V. |
| 6 | NC | unconnected | No internal connection. |
| 7 | NC | unconnected | No internal connection. |
| 8 | RESET | output | Active-low reset output that is an NPN open-collector transistor and requires a pullup resistor; an additional transistor is needed for active-high reset or higher output current. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-8 |
| Category | Power Supply Chip |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
TL7700CPW - Footprint:
Package_SO:TSSOP-8_3x3mm_P0.65mm - 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
tl7700cpw-etched.step/tl7700cpw-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tl7700cpw.step/tl7700cpw.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (31 pp, sha256
1547d1ba57f7e311, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).