component
TL712CPWR
Public Made by Adomby adom
Texas Instruments Comparators, TSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTL712CPWR
Texas Instruments · Comparators · TSSOP-8
TL712CPWR from Texas Instruments, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection. |
| 2 | IN− | input | Negative differential analog input; 4 kΩ nominal input impedance with 0 to 5.5 V common-mode range. |
| 3 | IN+ | input | Positive differential analog input; 4 kΩ nominal input impedance with 0 to 5.5 V common-mode range. |
| 4 | OE | input | Output enable input, active low; both outputs are in high-impedance state when OE is high. |
| 5 | GND | power_in | Ground, negative supply reference. |
| 6 | OUT+ | tri_state | Positive 3-state TTL output; high level 2.7 to 3.5 V, low level 0.4 to 0.5 V, can sink 16 mA. |
| 7 | OUT− | tri_state | Negative 3-state TTL output; high level 2.7 to 3.5 V, low level 0.4 to 0.5 V, can sink 16 mA. |
| 8 | VCC | power_in | Positive supply voltage input; 4.75 to 5.25 V operating range. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
TL712CPWR - Footprint:
Package_SO:TSSOP-8_3x3mm_P0.65mm - 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
tl712cpwr-etched.step/tl712cpwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tl712cpwr.step/tl712cpwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (20 pp, sha256
466f06dd8aed0864, retrieved 2026-10-03, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).