main
History Download
Ray tl594cpwr: specified limits as data (metadata.characteristics, 47 rows from the datasheet) 34e0f4e

TL594CPWR

Texas Instruments · DC-DC Converters · TSSOP-16

TL594CPWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1IN+ input Non-inverting input of Error Amplifier 1, common-mode input voltage range -0.3V to VCC-2V
2 1IN- input Inverting input of Error Amplifier 1
3 FEEDBACK input Feedback input pin for PWM control; input voltage 0.5V to 3.5V produces duty cycle from 97% to 0%
4 DTC input Dead Time Control Comparator input for controlling minimum dead time from 3% to 100%; input range 0V to 3.3V
5 CT passive Capacitor terminal for setting oscillator frequency with external CT capacitor; frequency range 1kHz to 300kHz with appropriate CT and RT values
6 RT passive Resistor terminal for setting oscillator frequency; external RT timing resistor value range 1.8kΩ to 500kΩ
7 GND power_in Ground reference for all internal circuits
8 C1 output MOSFET Output 1 drain terminal, 200mA maximum source/sink current, saturated voltage <1.3V in common-source configuration
9 E1 output MOSFET Output 1 source terminal, 200mA maximum source/sink current
10 E2 output MOSFET Output 2 source terminal, 200mA maximum source/sink current
11 C2 output MOSFET Output 2 drain terminal, 200mA maximum source/sink current, saturated voltage <1.3V in common-source configuration
12 VCC power_in Positive power supply input; recommended operating voltage range 7V to 40V; absolute maximum 41V
13 OUTPUT CTRL input Output control input for mode selection: ground for single-ended/parallel operation, Vref for push-pull operation
14 REF output 5V reference regulator output with ±1% initial accuracy; can supply 10mA maximum for external bias circuits
15 2IN- input Inverting input of Error Amplifier 2
16 2IN+ input Non-inverting input of Error Amplifier 2, common-mode input voltage range -0.3V to VCC-2V

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-16
Category Power Management (PMIC)
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 41 V 4
Collector output voltage 41 V 4
Collector output current 250 mA 4
Operating junction temperature TJ 150 °C 4
Storage temperature Tstg -65 150 °C 4
ESD human body model (HBM) V(ESD) 1000 V HBM per ANSI/ESDA/JEDEC JS-001 4
ESD charged device model (CDM) V(ESD) 1000 V CDM per JEDEC JESD22-C101 4
Supply voltage VCC 7 40 V 4
Collector output voltage VO 40 V 4
Collector output current (each transistor) 200 mA 4
Current into feedback terminal 0.3 mA 4
Timing capacitor CT 0.47 10000 nF 4
Timing resistor RT 1.8 500 kΩ 4
Oscillator frequency fosc 1 300 kHz 4
Operating free-air temperature TA 0 70 °C TL594C 4
Output voltage (reference) REF 4.95 5 5.05 V IO = 1mA, TA = 25℃ 5
Input regulation 2 25 mV VCC = 7V to 40V, TA = 25°C 5
Output regulation 6 35 mV IO = 1mA to 10mA, TA = 25°C 5
Output voltage change with temperature 2 10 mV/V ΔTA = min to max 5
Short-circuit output current 10 35 50 mA Vref = 0 5
Input offset voltage, error amplifier 2 10 mV FEEDBACK = 2.5V 5
Input offset current 25 250 nA FEEDBACK = 2.5V 5
Input bias current 0.2 1 µA FEEDBACK = 2.5V 5
Common-mode input voltage, error amplifier 0.3 V VCC = 7V to 40V 5
Open-loop voltage amplification, error amplifier 70 80 dB ΔVO = 3V, RL = 2kΩ, VO = 0.5V to 3.5V 5
Common-mode rejection ratio, error amplifier 65 100 dB VCC = 40V, TA = 25°C 5
Output sink current, FEEDBACK 0.3 0.7 mA VID = -15mV to -5V, FEEDBACK = 0.5V 5
Dead-time control input bias current VI -0.006 -10 µA VI = 0 to 5.25V 5
Dead-time control input threshold voltage, zero duty cycle 2.5 3.3 V Zero duty cycle 5
C1, C2 off-state current VC 4 100 µA VC = 40V, VE = 0V, VCC = 40V 5
C1, C2 off-state current (DTC and output control low) VC 2 200 µA DTC and OUTPUT CTRL = 0V, VC = 15V, VE = 0V, VCC = 1V to 3V 5
C1E1, C2E2 saturation voltage, common-source 0.5 1.3 V VE = 0, IC = 200mA 5
C1E1, C2E2 saturation voltage, source follower 1.65 2.5 V VC = 15V, IE = –200mA 5
Input threshold voltage, FEEDBACK, zero duty cycle 3.4 4.5 V Zero duty cycle 6
Input sink current, FEEDBACK 0.3 0.7 mA FEEDBACK = 0.5V 6
Undervoltage lockout threshold voltage 3.5 6.9 V ΔTA = min to max 6
Standby supply current 1.62 15 mA VCC = 15V, RT at Vref, all other inputs and outputs open 6
Standby supply current 1.68 18 mA VCC = 40V, RT at Vref, all other inputs and outputs open 6
Output voltage rise time, common-source 70 200 ns VCC = 15V, TA = 25°C, common-source configuration 6
Output voltage fall time, common-source 20 100 ns VCC = 15V, TA = 25°C, common-source configuration 6
Output voltage rise time, source follower 85 400 ns VCC = 15V, TA = 25°C, source-follower configuration 6
Output voltage fall time, source follower 35 100 ns VCC = 15V, TA = 25°C, source-follower configuration 6
Junction-to-ambient thermal resistance (PW, TSSOP) RθJA 114 °C/W 4
Junction-to-case (top) thermal resistance (PW, TSSOP) RθJC(top) 53.2 °C/W 4
Junction-to-board thermal resistance (PW, TSSOP) RθJB 71.8 °C/W 4
Junction-to-top characterization parameter (PW, TSSOP) ψJT 7.3 °C/W 4
Junction-to-board characterization parameter (PW, TSSOP) ψJB 71.2 °C/W 5

CAD (KiCad official)

  • Symbol: TL594CPWR
  • Footprint: Package_SO:TSSOP-16_4.4x5mm_P0.65mm
  • 3D model: TSSOP-16 (KiCad packages3D, STEP)
  • 3D model files: tl594cpwr-etched.step / tl594cpwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tl594cpwr.step / tl594cpwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (35 pp, sha256 039f5c630764f6f7, retrieved 2026-09-27, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF