component
TL5001CDR
Public Made by Adomby adom
Texas Instruments DC-DC Converters, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+44@@ -0,0 +1,44 @@+# TL5001CDR++**Texas Instruments** · DC-DC Converters · SOIC-8++TL5001CDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | OUT | tri_state | Open-collector PWM output; maximum collector current 21 mA, voltage rating 51 V; driven low when oscillator triangle wave is below both DTC voltage and error-amplifier output voltage with UVLO and SCP inactive. |+| 2 | VCC | power_in | Power supply input; operating range 3.6 V to 40 V; provides power to internal 2.5 V regulator that generates internal bias and reference voltages. |+| 3 | COMP | output | Error amplifier output for compensation network; output voltage 0.95 V to 1.05 V nominal; can source maximum 45 µA, requires 100 kΩ minimum external load resistance. |+| 4 | FB | input | Feedback input to error amplifier noninverting input; common-mode voltage range 0 V to 1.5 V; compared against internal 1 V reference; input bias current −160 nA to −500 nA. |+| 5 | SCP | passive | Short-circuit protection network terminal; connect external capacitor to ground for SCP timing (185 mV initial to 1 V timeout); external ground connection resets SCP latch; comparator threshold 0.95 V to 1.05 V. |+| 6 | DTC | passive | Dead-time control network terminal; internal current source generates reference current; connect external resistor to ground to set maximum duty cycle from 0% to 100%; input threshold 0.5 V to 0.7 V for 0% duty cycle and 1.3 V to 1.5 V for 100% duty cycle. |+| 7 | RT | passive | Oscillator timing network terminal; connect external resistor (15 kΩ to 250 kΩ) to ground to set oscillator frequency from 20 kHz to 500 kHz; source impedance approximately 1250 Ω. |+| 8 | GND | power_in | Ground reference for all signal and power circuits. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-8 |+| Category | Power Management (PMIC) |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `TL5001CDR`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8 (KiCad packages3D, STEP)+- 3D model files: `tl5001cdr-etched.step` / `tl5001cdr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tl5001cdr.step` / `tl5001cdr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tl5001) (36 pp, sha256 `14e2c0378acc4b21`, retrieved 2026-09-26, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tl5001cdr-datasheet.pdf)
page.jsonadded+156@@ -0,0 +1,156 @@+{+ "slug": "tl5001cdr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments DC-DC Converters, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "tl5001cdr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tl5001cdr.kicad_sym",+ "tl5001cdr.kicad_mod",+ "tl5001cdr.glb",+ "tl5001cdr.step",+ "tl5001cdr.lbr",+ "docs/hero.png",+ "docs/tl5001cdr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "TL5001CDR",+ "manufacturer": "Texas Instruments",+ "package": "SOIC-8",+ "pin_count": 8,+ "category": "Power Management (PMIC)",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tl5001",+ "parts": {+ "symbol": "tl5001cdr.kicad_sym",+ "footprint": "tl5001cdr.kicad_mod",+ "model_3d": "tl5001cdr-etched.glb",+ "model_3d_plain": "tl5001cdr.glb",+ "model_3d_step": "tl5001cdr-etched.step",+ "model_3d_step_plain": "tl5001cdr.step",+ "lbr": "tl5001cdr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2867084",+ "digikey": "296-1294-2-ND",+ "mouser": "595-TL5001CDR"+ },+ "distributor_check": {+ "checked_at": "2026-09-26T19:51:31Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-1294-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-TL5001CDR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "OUT",+ "type": "tri_state",+ "description": "Open-collector PWM output; maximum collector current 21 mA, voltage rating 51 V; driven low when oscillator triangle wave is below both DTC voltage and error-amplifier output voltage with UVLO and SCP inactive."+ },+ {+ "number": "2",+ "name": "VCC",+ "type": "power_in",+ "description": "Power supply input; operating range 3.6 V to 40 V; provides power to internal 2.5 V regulator that generates internal bias and reference voltages."+ },+ {+ "number": "3",+ "name": "COMP",+ "type": "output",+ "description": "Error amplifier output for compensation network; output voltage 0.95 V to 1.05 V nominal; can source maximum 45 µA, requires 100 kΩ minimum external load resistance."+ },+ {+ "number": "4",+ "name": "FB",+ "type": "input",+ "description": "Feedback input to error amplifier noninverting input; common-mode voltage range 0 V to 1.5 V; compared against internal 1 V reference; input bias current −160 nA to −500 nA."+ },+ {+ "number": "5",+ "name": "SCP",+ "type": "passive",+ "description": "Short-circuit protection network terminal; connect external capacitor to ground for SCP timing (185 mV initial to 1 V timeout); external ground connection resets SCP latch; comparator threshold 0.95 V to 1.05 V."+ },+ {+ "number": "6",+ "name": "DTC",+ "type": "passive",+ "description": "Dead-time control network terminal; internal current source generates reference current; connect external resistor to ground to set maximum duty cycle from 0% to 100%; input threshold 0.5 V to 0.7 V for 0% duty cycle and 1.3 V to 1.5 V for 100% duty cycle."+ },+ {+ "number": "7",+ "name": "RT",+ "type": "passive",+ "description": "Oscillator timing network terminal; connect external resistor (15 kΩ to 250 kΩ) to ground to set oscillator frequency from 20 kHz to 500 kHz; source impedance approximately 1250 Ω."+ },+ {+ "number": "8",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for all signal and power circuits."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [],+ "pages_sent": 36,+ "cost_usd": 0.3004,+ "at": "2026-09-26T19:51:15"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tl5001",+ "pages": 36,+ "sha256": "14e2c0378acc4b21",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}