main
Ray
Publish 0.1.0
11eeb35
TL494CDR2G
onsemi · DC-DC Converters · SOIC-16
TL494CDR2G from onsemi, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Error Amp 1 Noninv Input | input | Noninverting input of error amplifier 1, with a common mode range of -0.3 V to (VCC - 2 V). |
| 2 | Error Amp 1 Inv Input | input | Inverting input of error amplifier 1, with a common mode range of -0.3 V to (VCC - 2 V). |
| 3 | Compen/PWM Comp Input | bidirectional | Error amplifier outputs (ORed) and PWM comparator input used for loop compensation and feedback, with output duty varying as the pin goes from 0.5 V to 3.5 V and current into the pin limited to 0.3 mA. |
| 4 | Deadtime Control | input | Deadtime control comparator input accepting a fixed voltage of 0 V to 3.3 V to set additional deadtime, with an effective 120 mV offset limiting minimum deadtime to about 4%. |
| 5 | CT | passive | Connection for the timing capacitor CT (0.0047 uF to 10 uF recommended) that sets the oscillator frequency together with RT. |
| 6 | RT | passive | Connection for the timing resistor RT (1.8 kOhm to 500 kOhm recommended) that sets the oscillator frequency, fosc approx 1.1/(RT x CT). |
| 7 | Ground | power_in | Ground reference for the device. |
| 8 | C1 | passive | Collector of uncommitted output transistor Q1, rated 42 V maximum and 500 mA maximum (200 mA recommended). |
| 9 | E1 | passive | Emitter of uncommitted output transistor Q1, rated to 500 mA source or sink. |
| 10 | E2 | passive | Emitter of uncommitted output transistor Q2, rated to 500 mA source or sink. |
| 11 | C2 | passive | Collector of uncommitted output transistor Q2, rated 42 V maximum and 500 mA maximum (200 mA recommended). |
| 12 | VCC | power_in | Positive supply input, recommended 7.0 V to 40 V with an absolute maximum of 42 V. |
| 13 | Output Control | input | Selects single-ended/parallel operation when grounded or push-pull operation when connected to Vref. |
| 14 | Vref Output | power_out | Internal 5.0 V reference output (4.75 V to 5.25 V) capable of sourcing up to 10 mA. |
| 15 | Error Amp 2 Inv Input | input | Inverting input of error amplifier 2, with a common mode range of -0.3 V to (VCC - 2 V). |
| 16 | Error Amp 2 Noninv Input | input | Noninverting input of error amplifier 2, with a common mode range of -0.3 V to (VCC - 2 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOIC-16 |
| Category | Power Supply Chip |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply Voltage | VCC | 42 | V | 1 | |||
| Collector Output Voltage | VC1, VC2 | 42 | V | 1 | |||
| Collector Output Current (Each transistor) | IC1, IC2 | 500 | mA | Note 1 | 1 | ||
| Amplifier Input Voltage Range | VIR | -0.3 | 42 | V | 1 | ||
| Power Dissipation | PD | 1000 | mW | TA <= 45°C | 1 | ||
| Thermal Resistance, Junction-to-Ambient | RJA | 80 | °C/W | 1 | |||
| Operating Junction Temperature | TJ | 125 | °C | 1 | |||
| Storage Temperature Range | Tstg | -55 | 125 | °C | 1 | ||
| Operating Ambient Temperature Range | TA | 0 | 70 | °C | TL494C | 1 | |
| Power Supply Voltage | VCC | 7 | 15 | 40 | V | 2 | |
| Collector Output Voltage | VC1, VC2 | 30 | 40 | V | 2 | ||
| Collector Output Current (Each transistor) | IC1, IC2 | 200 | mA | 2 | |||
| Amplified Input Voltage | Vin | -0.3 | V | max printed as VCC - 2.0 V | 2 | ||
| Current Into Feedback Terminal | lfb | 0.3 | mA | 2 | |||
| Reference Output Current | lref | 10 | mA | 2 | |||
| Timing Resistor | RT | 1.8 | 30 | 500 | k | 2 | |
| Timing Capacitor | CT | 0.0047 | 0.001 | 10 | µF | 2 | |
| Oscillator Frequency | fosc | 1 | 40 | 200 | kHz | 2 | |
| Reference Voltage | Vref | 4.75 | 5 | 5.25 | V | IO = 1.0 mA | 2 |
| Line Regulation | Regline | 2 | 25 | mV | VCC = 7.0 V to 40 V | 2 | |
| Load Regulation | Regload | 3 | 15 | mV | IO = 1.0 mA to 10 mA | 2 | |
| Short Circuit Output Current | ISC | 15 | 35 | 75 | mA | Vref = 0 V | 2 |
| Collector Off-State Current | IC(off) | 2 | 100 | µA | VCC = 40 V, VCE = 40 V | 2 | |
| Emitter Off-State Current | IE(off) | -100 | µA | VCC = 40 V, VC = 40 V, VE = 0 V | 2 | ||
| Collector-Emitter Saturation Voltage, Common-Emitter | Vsat(C) | 1.1 | 1.3 | V | VE = 0 V, IC = 200 mA | 2 | |
| Collector-Emitter Saturation Voltage, Emitter-Follower | Vsat(E) | 1.5 | 2.5 | V | VC = 15 V, IE = -200 mA | 2 | |
| Output Control Pin Current, Low State | IOCL | 10 | µA | VOC <= 0.4 V | 2 | ||
| Output Control Pin Current, High State | IOCH | 0.2 | 3.5 | mA | VOC = Vref | 2 | |
| Output Voltage Rise Time, Common-Emitter | tr | 100 | 200 | ns | Common-Emitter (See Figure 12) | 2 | |
| Output Voltage Rise Time, Emitter-Follower | tr | 100 | 200 | ns | Emitter-Follower (See Figure 13) | 2 | |
| Output Voltage Fall Time, Common-Emitter | tf | 25 | 100 | ns | Common-Emitter (See Figure 12) | 2 | |
| Output Voltage Fall Time, Emitter-Follower | tf | 40 | 100 | ns | Emitter-Follower (See Figure 13) | 2 | |
| Input Offset Voltage | VIO | 2 | 10 | mV | VO (Pin 3) = 2.5 V | 3 | |
| Input Offset Current | IIO | 5 | 250 | nA | VO (Pin 3) = 2.5 V | 3 | |
| Input Bias Current | IIB | -0.1 | -1 | µA | VO (Pin 3) = 2.5 V | 3 | |
| Input Common Mode Voltage Range | VICR | -0.3 | V | VCC = 40 V, TA = 25°C; max printed as VCC-2.0 V | 3 | ||
| Open Loop Voltage Gain | AVOL | 70 | 95 | dB | VO = 3.0 V, VO = 0.5 V to 3.5 V, RL = 2.0 k | 3 | |
| Common Mode Rejection Ratio | CMRR | 65 | 90 | dB | VCC = 40 V | 3 | |
| Output Sink Current | IO- | 0.3 | 0.7 | mA | VO (Pin 3) = 0.7 V | 3 | |
| Output Source Current | IO+ | 2 | -4 | mA | VO (Pin 3) = 3.5 V | 3 | |
| Input Threshold Voltage (Zero Duty Cycle) | VTH | 2.5 | 4.5 | V | Zero Duty Cycle; Test Circuit Figure 11 | 3 | |
| Input Sink Current | II- | 0.3 | 0.7 | mA | V(Pin 3) = 0.7 V | 3 | |
| Input Bias Current (Pin 4) | IIB(DT) | -2 | -10 | µA | VPin 4 = 0 V to 5.25 V | 3 | |
| Maximum Duty Cycle, Each Output, Push-Pull Mode | DCmax | 45 | 48 | 50 | % | VPin 4 = 0 V, CT = 0.01 F, RT = 12 k | 3 |
| Maximum Duty Cycle, Each Output, Push-Pull Mode | DCmax | 45 | 50 | % | VPin 4 = 0 V, CT = 0.001 F, RT = 30 k | 3 | |
| Input Threshold Voltage (Pin 4), Zero Duty Cycle | Vth | 0 | 2.8 | V | Zero Duty Cycle | 3 | |
| Input Threshold Voltage (Pin 4), Maximum Duty Cycle | Vth | 3.3 | V | Maximum Duty Cycle | 3 | ||
| Oscillator Frequency | fosc | 40 | kHz | CT = 0.001 F, RT = 30 k | 3 | ||
| Frequency Change with Temperature | fosc(T) | 12 | % | TA = Tlow to Thigh, CT = 0.01 F, RT = 12 k | 3 | ||
| Turn-On Threshold | Vth | 5.5 | 6.43 | 7 | V | VCC increasing, Iref = 1.0 mA | 3 |
| Standby Supply Current | ICC | 5.5 | 10 | mA | Pin 6 at Vref, All other inputs and outputs open, VCC = 15 V | 3 | |
| Standby Supply Current | ICC | 7 | 15 | mA | Pin 6 at Vref, All other inputs and outputs open, VCC = 40 V | 3 | |
| Crossover Frequency | fC | 350 | kHz | VO = 0.5 V to 3.5 V, RL = 2.0 k | 3 | ||
| Phase Margin at Unity-Gain | m | 65 | deg. | VO = 0.5 V to 3.5 V, RL = 2.0 k | 3 | ||
| Power Supply Rejection Ratio | PSRR | 100 | dB | VCC = 33 V, VO = 2.5 V, RL = 2.0 k | 3 | ||
| Frequency Standard Deviation | fosc | 3 | % | CT = 0.001 F, RT = 30 k | 3 | ||
| Frequency Change with Voltage | fosc(V) | 0.1 | % | VCC = 7.0 V to 40 V, TA = 25°C | 3 | ||
| Average Supply Current | ICC | 7 | mA | CT = 0.01 F, RT = 12 k, V(Pin 4) = 2.0 V, VCC = 15 V (See Figure 12) | 3 |
CAD (KiCad official)
- Symbol:
TL494CDR2G - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files:
tl494cdr2g-etched.step/tl494cdr2g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tl494cdr2g.step/tl494cdr2g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (14 pp, sha256
da61e4216ce6e534, retrieved 2026-11-07, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TL494CDR2G
**onsemi** · DC-DC Converters · SOIC-16
TL494CDR2G from onsemi, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Error Amp 1 Noninv Input | input | Noninverting input of error amplifier 1, with a common mode range of -0.3 V to (VCC - 2 V). |
| 2 | Error Amp 1 Inv Input | input | Inverting input of error amplifier 1, with a common mode range of -0.3 V to (VCC - 2 V). |
| 3 | Compen/PWM Comp Input | bidirectional | Error amplifier outputs (ORed) and PWM comparator input used for loop compensation and feedback, with output duty varying as the pin goes from 0.5 V to 3.5 V and current into the pin limited to 0.3 mA. |
| 4 | Deadtime Control | input | Deadtime control comparator input accepting a fixed voltage of 0 V to 3.3 V to set additional deadtime, with an effective 120 mV offset limiting minimum deadtime to about 4%. |
| 5 | CT | passive | Connection for the timing capacitor CT (0.0047 uF to 10 uF recommended) that sets the oscillator frequency together with RT. |
| 6 | RT | passive | Connection for the timing resistor RT (1.8 kOhm to 500 kOhm recommended) that sets the oscillator frequency, fosc approx 1.1/(RT x CT). |
| 7 | Ground | power_in | Ground reference for the device. |
| 8 | C1 | passive | Collector of uncommitted output transistor Q1, rated 42 V maximum and 500 mA maximum (200 mA recommended). |
| 9 | E1 | passive | Emitter of uncommitted output transistor Q1, rated to 500 mA source or sink. |
| 10 | E2 | passive | Emitter of uncommitted output transistor Q2, rated to 500 mA source or sink. |
| 11 | C2 | passive | Collector of uncommitted output transistor Q2, rated 42 V maximum and 500 mA maximum (200 mA recommended). |
| 12 | VCC | power_in | Positive supply input, recommended 7.0 V to 40 V with an absolute maximum of 42 V. |
| 13 | Output Control | input | Selects single-ended/parallel operation when grounded or push-pull operation when connected to Vref. |
| 14 | Vref Output | power_out | Internal 5.0 V reference output (4.75 V to 5.25 V) capable of sourcing up to 10 mA. |
| 15 | Error Amp 2 Inv Input | input | Inverting input of error amplifier 2, with a common mode range of -0.3 V to (VCC - 2 V). |
| 16 | Error Amp 2 Noninv Input | input | Noninverting input of error amplifier 2, with a common mode range of -0.3 V to (VCC - 2 V). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOIC-16 |
| Category | Power Supply Chip |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply Voltage | VCC | | | 42 | V | | 1 |
| Collector Output Voltage | VC1, VC2 | | | 42 | V | | 1 |
| Collector Output Current (Each transistor) | IC1, IC2 | | | 500 | mA | Note 1 | 1 |
| Amplifier Input Voltage Range | VIR | -0.3 | | 42 | V | | 1 |
| Power Dissipation | PD | | | 1000 | mW | TA <= 45°C | 1 |
| Thermal Resistance, Junction-to-Ambient | RJA | | | 80 | °C/W | | 1 |
| Operating Junction Temperature | TJ | | | 125 | °C | | 1 |
| Storage Temperature Range | Tstg | -55 | | 125 | °C | | 1 |
| Operating Ambient Temperature Range | TA | 0 | | 70 | °C | TL494C | 1 |
| Power Supply Voltage | VCC | 7 | 15 | 40 | V | | 2 |
| Collector Output Voltage | VC1, VC2 | | 30 | 40 | V | | 2 |
| Collector Output Current (Each transistor) | IC1, IC2 | | | 200 | mA | | 2 |
| Amplified Input Voltage | Vin | -0.3 | | | V | max printed as VCC - 2.0 V | 2 |
| Current Into Feedback Terminal | lfb | | | 0.3 | mA | | 2 |
| Reference Output Current | lref | | | 10 | mA | | 2 |
| Timing Resistor | RT | 1.8 | 30 | 500 | k | | 2 |
| Timing Capacitor | CT | 0.0047 | 0.001 | 10 | µF | | 2 |
| Oscillator Frequency | fosc | 1 | 40 | 200 | kHz | | 2 |
| Reference Voltage | Vref | 4.75 | 5 | 5.25 | V | IO = 1.0 mA | 2 |
| Line Regulation | Regline | | 2 | 25 | mV | VCC = 7.0 V to 40 V | 2 |
| Load Regulation | Regload | | 3 | 15 | mV | IO = 1.0 mA to 10 mA | 2 |
| Short Circuit Output Current | ISC | 15 | 35 | 75 | mA | Vref = 0 V | 2 |
| Collector Off-State Current | IC(off) | | 2 | 100 | µA | VCC = 40 V, VCE = 40 V | 2 |
| Emitter Off-State Current | IE(off) | | | -100 | µA | VCC = 40 V, VC = 40 V, VE = 0 V | 2 |
| Collector-Emitter Saturation Voltage, Common-Emitter | Vsat(C) | | 1.1 | 1.3 | V | VE = 0 V, IC = 200 mA | 2 |
| Collector-Emitter Saturation Voltage, Emitter-Follower | Vsat(E) | | 1.5 | 2.5 | V | VC = 15 V, IE = -200 mA | 2 |
| Output Control Pin Current, Low State | IOCL | | | 10 | µA | VOC <= 0.4 V | 2 |
| Output Control Pin Current, High State | IOCH | | 0.2 | 3.5 | mA | VOC = Vref | 2 |
| Output Voltage Rise Time, Common-Emitter | tr | | 100 | 200 | ns | Common-Emitter (See Figure 12) | 2 |
| Output Voltage Rise Time, Emitter-Follower | tr | | 100 | 200 | ns | Emitter-Follower (See Figure 13) | 2 |
| Output Voltage Fall Time, Common-Emitter | tf | | 25 | 100 | ns | Common-Emitter (See Figure 12) | 2 |
| Output Voltage Fall Time, Emitter-Follower | tf | | 40 | 100 | ns | Emitter-Follower (See Figure 13) | 2 |
| Input Offset Voltage | VIO | | 2 | 10 | mV | VO (Pin 3) = 2.5 V | 3 |
| Input Offset Current | IIO | | 5 | 250 | nA | VO (Pin 3) = 2.5 V | 3 |
| Input Bias Current | IIB | | -0.1 | -1 | µA | VO (Pin 3) = 2.5 V | 3 |
| Input Common Mode Voltage Range | VICR | -0.3 | | | V | VCC = 40 V, TA = 25°C; max printed as VCC-2.0 V | 3 |
| Open Loop Voltage Gain | AVOL | 70 | 95 | | dB | VO = 3.0 V, VO = 0.5 V to 3.5 V, RL = 2.0 k | 3 |
| Common Mode Rejection Ratio | CMRR | 65 | 90 | | dB | VCC = 40 V | 3 |
| Output Sink Current | IO- | 0.3 | 0.7 | | mA | VO (Pin 3) = 0.7 V | 3 |
| Output Source Current | IO+ | 2 | -4 | | mA | VO (Pin 3) = 3.5 V | 3 |
| Input Threshold Voltage (Zero Duty Cycle) | VTH | | 2.5 | 4.5 | V | Zero Duty Cycle; Test Circuit Figure 11 | 3 |
| Input Sink Current | II- | 0.3 | 0.7 | | mA | V(Pin 3) = 0.7 V | 3 |
| Input Bias Current (Pin 4) | IIB(DT) | | -2 | -10 | µA | VPin 4 = 0 V to 5.25 V | 3 |
| Maximum Duty Cycle, Each Output, Push-Pull Mode | DCmax | 45 | 48 | 50 | % | VPin 4 = 0 V, CT = 0.01 F, RT = 12 k | 3 |
| Maximum Duty Cycle, Each Output, Push-Pull Mode | DCmax | | 45 | 50 | % | VPin 4 = 0 V, CT = 0.001 F, RT = 30 k | 3 |
| Input Threshold Voltage (Pin 4), Zero Duty Cycle | Vth | | 0 | 2.8 | V | Zero Duty Cycle | 3 |
| Input Threshold Voltage (Pin 4), Maximum Duty Cycle | Vth | | 3.3 | | V | Maximum Duty Cycle | 3 |
| Oscillator Frequency | fosc | | 40 | | kHz | CT = 0.001 F, RT = 30 k | 3 |
| Frequency Change with Temperature | fosc(T) | | | 12 | % | TA = Tlow to Thigh, CT = 0.01 F, RT = 12 k | 3 |
| Turn-On Threshold | Vth | 5.5 | 6.43 | 7 | V | VCC increasing, Iref = 1.0 mA | 3 |
| Standby Supply Current | ICC | | 5.5 | 10 | mA | Pin 6 at Vref, All other inputs and outputs open, VCC = 15 V | 3 |
| Standby Supply Current | ICC | | 7 | 15 | mA | Pin 6 at Vref, All other inputs and outputs open, VCC = 40 V | 3 |
| Crossover Frequency | fC | | 350 | | kHz | VO = 0.5 V to 3.5 V, RL = 2.0 k | 3 |
| Phase Margin at Unity-Gain | m | | 65 | | deg. | VO = 0.5 V to 3.5 V, RL = 2.0 k | 3 |
| Power Supply Rejection Ratio | PSRR | | 100 | | dB | VCC = 33 V, VO = 2.5 V, RL = 2.0 k | 3 |
| Frequency Standard Deviation | fosc | | 3 | | % | CT = 0.001 F, RT = 30 k | 3 |
| Frequency Change with Voltage | fosc(V) | | 0.1 | | % | VCC = 7.0 V to 40 V, TA = 25°C | 3 |
| Average Supply Current | ICC | | 7 | | mA | CT = 0.01 F, RT = 12 k, V(Pin 4) = 2.0 V, VCC = 15 V (See Figure 12) | 3 |
## CAD (KiCad official)
- Symbol: `TL494CDR2G`
- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`
- 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files: `tl494cdr2g-etched.step` / `tl494cdr2g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tl494cdr2g.step` / `tl494cdr2g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/tl494c-d.pdf) (14 pp, sha256 `da61e4216ce6e534`, retrieved 2026-11-07, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tl494cdr2g-datasheet.pdf)