main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs tl432aidbzt: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tl432aidbzt: viewers · Ray
package.json tl432aidbzt: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json tl432aidbzt: specified limits as data (metadata.characteristics, 19 rows from the datasheet) · Ray
README.md tl432aidbzt: specified limits as data (metadata.characteristics, 19 rows from the datasheet) · Ray
tl432aidbzt-etched.fit.json tl432aidbzt: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tl432aidbzt-etched.glb tl432aidbzt: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tl432aidbzt-etched.step tl432aidbzt: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tl432aidbzt.glb Publish 0.1.0 · Ray
tl432aidbzt.kicad_mod Publish 0.1.0 · Ray
tl432aidbzt.kicad_sym Publish 0.1.0 · Ray
tl432aidbzt.lbr Publish 0.1.0 · Ray
tl432aidbzt.step Publish 0.1.0 · Ray

TL432AIDBZT

Texas Instruments · Voltage Reference · SOT-23-3

TL432AIDBZT from Texas Instruments, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 REF input Voltage-sense reference input; the device regulates until this pin equals the internal ~2.495 V (typ) threshold; must not be left floating-requires Iref typ 2 µA, max 4 µA (at IKA = 10 mA) bias current; all voltages referenced to ANODE.
2 CATHODE passive Shunt-regulator cathode (I/O); sets regulated VKA adjustable from Vref (~2.495 V) to 36 V with continuous cathode current IKA from 1 mA to 100 mA (abs max 150 mA); dynamic impedance
3 ANODE power_in Common anode terminal, normally connected to circuit ground; serves as the voltage reference for both CATHODE (VKA) and REF threshold comparisons; all device voltages specified with respect to this pin.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-3
Category Power Management (PMIC)
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Reference voltage Vref 2470 2495 2520 mV VKA = Vref, IKA = 10mA 11
Reference input voltage deviation over temperature range VI(dev) 14 34 mV VKA = Vref, IKA = 10mA; full temperature range 11
Reference voltage change to cathode voltage change ratio ΔVref/ΔVKA -1.4 -2.7 mV/V IKA = 10mA; ΔVKA = 10V - Vref 11
Reference voltage change to cathode voltage change ratio ΔVref/ΔVKA -1 -2 mV/V IKA = 10mA; ΔVKA = 36V - 10V 11
Reference input current Iref 2 4 µA IKA = 10mA, R1 = 10kΩ, R2 = ∞ 11
Reference input current deviation over temperature range II(dev) 0.8 2.5 µA IKA = 10mA, R1 = 10kΩ, R2 = ∞; full temperature range 11
Minimum cathode current for regulation Imin 0.4 0.7 mA VKA = Vref 11
Off-state cathode current Ioff 0.1 0.5 µA VKA = 36V, Vref = 0 11
Dynamic impedance /ZKA/ 0.2 0.5 Ω VKA = Vref, f ≤ 1kHz, IKA = 1mA to 100mA 11
Cathode voltage (recommended) VKA 36 V Printed minimum is Vref (no numeric value) 6
Continuous cathode current range (recommended) IKA 1 100 mA 6
Operating free-air temperature range, TL43xxI TA -40 85 °C TL43xxI grade, natural convection 6
Cathode voltage VKA 37 V 6
Continuous cathode current range IKA -100 150 mA 6
Reference input current II(ref) -0.05 10 mA 6
Operating junction temperature range TJ 150 °C 6
Storage temperature range Tstg -65 150 °C 6
Junction-to-ambient thermal resistance (DBZ, 3-pin) RθJA 206 °C/W DBZ (SOT-23-3) package 6
Junction-to-case (top) thermal resistance (DBZ, 3-pin) RθJC(top) 76 °C/W DBZ (SOT-23-3) package 6

CAD (KiCad official)

  • Symbol: TL432AIDBZT
  • Footprint: Package_TO_SOT_SMD:SOT-23-3
  • 3D model: SOT-23-3 (KiCad packages3D, STEP)
  • 3D model files: tl432aidbzt-etched.step / tl432aidbzt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tl432aidbzt.step / tl432aidbzt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (86 pp, sha256 313277b9351e61ed, retrieved 2026-09-27, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF