main
Ray
tl431liaidbzr: specified limits as data (metadata.characteristics, 24 rows from the datasheet)
d2bf3ef
TL431LIAIDBZR
Texas Instruments · Voltage Reference · SOT-23-3
TL431LIAIDBZR from Texas Instruments, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CATHODE | bidirectional | Cathode output pin providing variable current and voltage, with output voltage range 2.495 V to 36 V relative to ANODE, operating current 1 mA minimum to 18 mA maximum continuous. |
| 2 | REF | input | Reference feedback input pin internally regulated at 2.495 V ±1% (A-grade) relative to ANODE, requiring minimum input current of 0.4 µA. |
| 3 | ANODE | power_in | Anode common reference pin establishing the voltage baseline for the CATHODE output and REF input, typically connected to ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-3 |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reference voltage (A grade, 1%) | Vref | 2470 | 2495 | 2520 | mV | VKA = Vref, IKA = 1mA, TA = 25°C | 5 |
| Reference voltage deviation over temperature (I grade) | VI(dev) | 6 | 17 | mV | VKA = Vref, IKA = 1mA, over recommended TA range (-40°C to 85°C) | 5 | |
| Reference voltage change ratio (VKA 10V to Vref) | ΔVref/ΔVKA | -1.4 | -2.7 | mV/V | IKA = 1mA, ΔVKA = 10V - Vref | 5 | |
| Reference voltage change ratio (VKA 36V to 10V) | ΔVref/ΔVKA | -1 | -2 | mV/V | IKA = 1mA, ΔVKA = 36V - 10V | 5 | |
| Reference input current | Iref | 0.2 | 0.4 | µA | IKA = 1mA, R1 = 10kΩ, R2 = ∞ | 5 | |
| Reference input current deviation over temperature | II(dev) | 0.1 | 0.3 | µA | IKA = 1mA, R1 = 10kΩ, R2 = ∞ | 5 | |
| Minimum regulation cathode current | Imin | 1 | mA | VKA = Vref | 5 | ||
| Off-state cathode current | Ioff | 0.1 | 1 | µA | VKA = 36V, Vref = 0 | 5 | |
| Dynamic impedance | /ZKA/ | 0.3 | 0.65 | Ω | VKA = Vref, IKA = 1mA to 15mA | 5 | |
| Cathode voltage | VKA | 36 | V | Minimum printed as VREF (not a numeric value) | 4 | ||
| Continuous cathode current range | IKA | 1 | 15 | mA | 4 | ||
| Free-air operating temperature (TL43xLIxI) | TA | -40 | 85 | °C | Natural-air ventilation, I-grade device | 4 | |
| Cathode voltage | VKA | 37 | V | All voltages referenced to ANODE | 4 | ||
| Continuous cathode current range | IKA | -10 | 18 | mA | 4 | ||
| Reference input current | II(ref) | -5 | 10 | mA | 4 | ||
| Operating junction temperature range | TJ | -40 | 150 | C | 4 | ||
| Storage temperature range | Tstg | -65 | 150 | C | 4 | ||
| ESD human body model (HBM) | V(ESD) | -2000 | 2000 | V | ANSI/ESDA/JEDEC JS-001, per pin | 4 | |
| ESD charged device model (CDM) | V(ESD) | -1000 | 1000 | V | JEDEC JESD22-C101 | 4 | |
| Junction-to-ambient thermal resistance (DBZ, 3 pins) | RθJA | 371.7 | C/W | 4 | |||
| Junction-to-case (top) thermal resistance (DBZ) | RθJC(top) | 145.9 | C/W | 4 | |||
| Junction-to-board thermal resistance (DBZ) | RθJB | 104.7 | C/W | 4 | |||
| Junction-to-top characterization parameter (DBZ) | ψJT | 23.9 | C/W | 4 | |||
| Junction-to-board characterization parameter (DBZ) | ψJB | 102.9 | C/W | 4 |
CAD (KiCad official)
- Symbol:
TL431LIAIDBZR - Footprint:
Package_TO_SOT_SMD:SOT-23-3 - 3D model: SOT-23-3 (KiCad packages3D, STEP)
- 3D model files:
tl431liaidbzr-etched.step/tl431liaidbzr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tl431liaidbzr.step/tl431liaidbzr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (37 pp, sha256
c40e9bce255918a9, retrieved 2026-09-24, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TL431LIAIDBZR
**Texas Instruments** · Voltage Reference · SOT-23-3
TL431LIAIDBZR from Texas Instruments, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CATHODE | bidirectional | Cathode output pin providing variable current and voltage, with output voltage range 2.495 V to 36 V relative to ANODE, operating current 1 mA minimum to 18 mA maximum continuous. |
| 2 | REF | input | Reference feedback input pin internally regulated at 2.495 V ±1% (A-grade) relative to ANODE, requiring minimum input current of 0.4 µA. |
| 3 | ANODE | power_in | Anode common reference pin establishing the voltage baseline for the CATHODE output and REF input, typically connected to ground. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-3 |
| Category | Power Management (PMIC) |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reference voltage (A grade, 1%) | Vref | 2470 | 2495 | 2520 | mV | VKA = Vref, IKA = 1mA, TA = 25°C | 5 |
| Reference voltage deviation over temperature (I grade) | VI(dev) | | 6 | 17 | mV | VKA = Vref, IKA = 1mA, over recommended TA range (-40°C to 85°C) | 5 |
| Reference voltage change ratio (VKA 10V to Vref) | ΔVref/ΔVKA | | -1.4 | -2.7 | mV/V | IKA = 1mA, ΔVKA = 10V - Vref | 5 |
| Reference voltage change ratio (VKA 36V to 10V) | ΔVref/ΔVKA | | -1 | -2 | mV/V | IKA = 1mA, ΔVKA = 36V - 10V | 5 |
| Reference input current | Iref | | 0.2 | 0.4 | µA | IKA = 1mA, R1 = 10kΩ, R2 = ∞ | 5 |
| Reference input current deviation over temperature | II(dev) | | 0.1 | 0.3 | µA | IKA = 1mA, R1 = 10kΩ, R2 = ∞ | 5 |
| Minimum regulation cathode current | Imin | | | 1 | mA | VKA = Vref | 5 |
| Off-state cathode current | Ioff | | 0.1 | 1 | µA | VKA = 36V, Vref = 0 | 5 |
| Dynamic impedance | /ZKA/ | | 0.3 | 0.65 | Ω | VKA = Vref, IKA = 1mA to 15mA | 5 |
| Cathode voltage | VKA | | | 36 | V | Minimum printed as VREF (not a numeric value) | 4 |
| Continuous cathode current range | IKA | 1 | | 15 | mA | | 4 |
| Free-air operating temperature (TL43xLIxI) | TA | -40 | | 85 | °C | Natural-air ventilation, I-grade device | 4 |
| Cathode voltage | VKA | | | 37 | V | All voltages referenced to ANODE | 4 |
| Continuous cathode current range | IKA | -10 | | 18 | mA | | 4 |
| Reference input current | II(ref) | -5 | | 10 | mA | | 4 |
| Operating junction temperature range | TJ | -40 | | 150 | C | | 4 |
| Storage temperature range | Tstg | -65 | | 150 | C | | 4 |
| ESD human body model (HBM) | V(ESD) | -2000 | | 2000 | V | ANSI/ESDA/JEDEC JS-001, per pin | 4 |
| ESD charged device model (CDM) | V(ESD) | -1000 | | 1000 | V | JEDEC JESD22-C101 | 4 |
| Junction-to-ambient thermal resistance (DBZ, 3 pins) | RθJA | | 371.7 | | C/W | | 4 |
| Junction-to-case (top) thermal resistance (DBZ) | RθJC(top) | | 145.9 | | C/W | | 4 |
| Junction-to-board thermal resistance (DBZ) | RθJB | | 104.7 | | C/W | | 4 |
| Junction-to-top characterization parameter (DBZ) | ψJT | | 23.9 | | C/W | | 4 |
| Junction-to-board characterization parameter (DBZ) | ψJB | | 102.9 | | C/W | | 4 |
## CAD (KiCad official)
- Symbol: `TL431LIAIDBZR`
- Footprint: `Package_TO_SOT_SMD:SOT-23-3`
- 3D model: SOT-23-3 (KiCad packages3D, STEP)
- 3D model files: `tl431liaidbzr-etched.step` / `tl431liaidbzr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tl431liaidbzr.step` / `tl431liaidbzr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tl431li) (37 pp, sha256 `c40e9bce255918a9`, retrieved 2026-09-24, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tl431liaidbzr-datasheet.pdf)