component
TL431IDR
Public Made by Adomby adom
Texas Instruments Voltage Reference, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTL431IDR
Texas Instruments · Voltage Reference · SOIC-8
TL431IDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CATHODE | output | Shunt regulator output node with regulated voltage adjustable from 2.5V to 36V and continuous sink current capability of 1mA to 100mA. |
| 2 | ANODE | power_in | Common ground reference connection pin, normally connected to ground. |
| 3 | ANODE | power_in | Common ground reference connection pin, normally connected to ground. |
| 4 | NC | unconnected | No internal connection. |
| 5 | NC | unconnected | No internal connection. |
| 6 | ANODE | power_in | Common ground reference connection pin, normally connected to ground. |
| 7 | ANODE | power_in | Common ground reference connection pin, normally connected to ground. |
| 8 | REF | input | Reference input threshold pin with reference voltage range of 2.44V to 2.55V and reference input current of 2µA to 4µA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reference Voltage | Vref | 2440 | 2495 | 2550 | mV | VKA = Vref, IKA = 10mA | 7 |
| Deviation of reference input voltage over full temperature range (all other devices, not SOT23-3) | VI(dev) | 5 | 50 | mV | VKA = Vref, IKA = 10mA | 7 | |
| Ratio of change in reference voltage to change in cathode voltage (ΔVKA = 10V − Vref) | ΔVref / ΔVKA | -1.4 | -2.7 | mV/V | IKA = 10mA, ΔVKA = 10V − Vref | 7 | |
| Ratio of change in reference voltage to change in cathode voltage (ΔVKA = 36V − 10V) | ΔVref / ΔVKA | -1 | -2 | mV/V | IKA = 10mA, ΔVKA = 36V − 10V | 7 | |
| Reference Input Current | Iref | 2 | 4 | µA | IKA = 10mA, R1 = 10kΩ, R2 = ∞ | 7 | |
| Deviation of reference input current over full temperature range | II(dev) | 0.8 | 2.5 | µA | IKA = 10mA, R1 = 10kΩ, R2 = ∞ | 7 | |
| Minimum cathode current for regulation | Imin | 0.4 | 1 | mA | VKA = Vref | 7 | |
| Off-state cathode current | Ioff | 0.1 | 1 | µA | VKA = 36V, Vref = 0 | 7 | |
| Dynamic Impedance | /ZKA/ | 0.2 | 0.5 | Ω | VKA = Vref, f ≤ 1kHz, IKA = 1mA to 100mA | 7 | |
| Cathode Voltage (recommended) | VKA | 36 | V | 5 | |||
| Continuous Cathode Current Range (recommended) | IKA | 1 | 100 | mA | 5 | ||
| Operating Free-Air Temperature (TL43xxI) | TA | -40 | 85 | °C | TL43xxI | 5 | |
| Cathode Voltage (absolute maximum) | VKA | 37 | V | All voltage values with respect to ANODE | 5 | ||
| Continuous Cathode Current Range (absolute maximum) | IKA | -100 | 150 | mA | 5 | ||
| Reference Input Current (absolute maximum) | II(ref) | -0.05 | 10 | mA | 5 | ||
| Operating Junction Temperature Range | TJ | 150 | °C | 5 | |||
| Storage Temperature Range | Tstg | -65 | 150 | °C | 5 | ||
| Junction-to-ambient thermal resistance (D, 8-pin SOIC) | RθJA | 97 | °C/W | D package (8 pins) | 5 | ||
| Junction-to-case (top) thermal resistance (D, 8-pin SOIC) | RθJC(top) | 39 | °C/W | D package (8 pins) | 5 |
CAD (KiCad official)
- Symbol:
TL431IDR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
tl431idr-etched.step/tl431idr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tl431idr.step/tl431idr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (85 pp, sha256
ed2e90697de4e2c5, retrieved 2026-09-23, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).