main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs tl431idbzr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tl431idbzr: viewers · Ray
package.json tl431idbzr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json tl431idbzr: specified limits as data (metadata.characteristics, 19 rows from the datasheet) · Ray
README.md tl431idbzr: specified limits as data (metadata.characteristics, 19 rows from the datasheet) · Ray
tl431idbzr-etched.fit.json tl431idbzr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tl431idbzr-etched.glb tl431idbzr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tl431idbzr-etched.step tl431idbzr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tl431idbzr.glb Publish 0.1.0 · Ray
tl431idbzr.kicad_mod Publish 0.1.0 · Ray
tl431idbzr.kicad_sym Publish 0.1.0 · Ray
tl431idbzr.lbr Publish 0.1.0 · Ray
tl431idbzr.step Publish 0.1.0 · Ray

TL431IDBZR

Texas Instruments · Voltage Reference · SOT-23-3

TL431IDBZR from Texas Instruments, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CATHODE bidirectional Shunt current/voltage input (cathode of the programmable shunt regulator); recommended operating cathode voltage is Vref to 36V (absolute maximum 37V) and recommended continuous cathode current range is 1mA to 100mA (absolute maximum -100mA to 150mA); must be biased above the minimum regulating current Imin (0.4mA typ / 1mA max) for the device to remain in regulation.
2 REF input Reference/threshold input measured relative to the ANODE pin, internally compared to the ~2.5V internal reference (Vref = 2440-2550mV depending on grade); requires a reference input current Iref of about 2µA typ / 4µA max (VKA=Vref, IKA=10mA, R1=10kΩ, R2=∞) and must not be left floating because it drives the base of an internal NPN transistor.
3 ANODE passive Common pin of the device, normally connected to ground, providing the return path for the cathode and reference currents.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-3
Category Power Management (PMIC)
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Reference voltage Vref 2440 2495 2550 mV VKA = Vref, IKA = 10mA 8
Reference voltage deviation over temperature range (SOT23-3 devices) VI(dev) 14 34 mV VKA = Vref, IKA = 10mA; SOT23-3 and TL432 devices 8
Ratio of change in reference voltage to change in cathode voltage ΔVref/ΔVKA -1.4 -2.7 mV/V IKA = 10mA; ΔVKA = 10V - Vref 8
Ratio of change in reference voltage to change in cathode voltage ΔVref/ΔVKA -1 -2 mV/V IKA = 10mA; ΔVKA = 36V - 10V 8
Reference input current Iref 2 4 µA IKA = 10mA, R1 = 10kΩ, R2 = ∞ 8
Reference input current deviation over temperature range II(dev) 0.8 2.5 µA IKA = 10mA, R1 = 10kΩ, R2 = ∞ 8
Minimum cathode current for regulation Imin 0.4 1 mA VKA = Vref 8
Off-state cathode current Ioff 0.1 1 µA VKA = 36V, Vref = 0 8
Dynamic impedance /ZKA/ 0.2 0.5 Ω VKA = Vref, f ≤ 1kHz, IKA = 1mA to 100mA 8
Cathode voltage VKA 36 V 6
Continuous cathode current range IKA 1 100 mA 6
Operating free-air temperature range TA -40 85 °C TL43xxI; natural ventilation 6
Cathode voltage VKA 37 V 6
Continuous cathode current range IKA -100 150 mA 6
Reference input current II(ref) -0.05 10 mA 6
Operating virtual junction temperature range TJ 150 °C 6
Storage temperature range Tstg -65 150 °C 6
Junction-to-ambient thermal resistance (DBZ, SOT-23-3) RθJA 206 °C/W 6
Junction-to-case (top) thermal resistance (DBZ, SOT-23-3) RθJC(top) 76 °C/W 6

CAD (KiCad official)

  • Symbol: TL431IDBZR
  • Footprint: Package_TO_SOT_SMD:SOT-23-3
  • 3D model: SOT-23-3 (KiCad packages3D, STEP)
  • 3D model files: tl431idbzr-etched.step / tl431idbzr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tl431idbzr.step / tl431idbzr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (86 pp, sha256 313277b9351e61ed, retrieved 2026-09-22, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF