Generated by kicad-footprint-generator · KiCad file format 20260206
TL431CDBVR
Texas Instruments · Voltage Reference · SOT-23-5
TL431CDBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection. |
| 2 | ANODE | power_in | Substrate connection attached to ANODE; must be connected to ANODE or left open per datasheet note. |
| 3 | CATHODE | output | Shunt current/voltage output terminal with regulated voltage adjustable from Vref (approximately 2.5V) to 36V with typical output impedance of 0.2Ω. |
| 4 | REF | input | Reference input where threshold voltage approximately 2.5V is applied relative to ANODE for setting the regulated output voltage. |
| 5 | ANODE | power_in | Common anode return connection normally connected to ground through which shunt current flows. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reference voltage | Vref | 2440 | 2495 | 2550 | mV | VKA = Vref, IKA = 10mA | 6 |
| Deviation of reference input voltage over full temperature range (all other devices, not SOT23-3 / TL432) | VI(dev) | 4 | 25 | mV | VKA = Vref, IKA = 10mA | 6 | |
| Ratio of change in reference voltage to change in cathode voltage | ΔVref/ΔVKA | -1.4 | -2.7 | mV/V | IKA = 10mA, ΔVKA = 10V- Vref | 6 | |
| Ratio of change in reference voltage to change in cathode voltage | ΔVref/ΔVKA | -1 | -2 | mV/V | IKA = 10mA, ΔVKA = 36V- 10V | 6 | |
| Reference input current | Iref | 2 | 4 | µA | IKA = 10mA, R1 = 10kΩ, R2 = ∞ | 6 | |
| Deviation of reference input current over full temperature range | II(dev) | 0.4 | 1.2 | µA | IKA = 10mA, R1 = 10kΩ, R2 = ∞ | 6 | |
| Minimum cathode current for regulation | Imin | 0.4 | 1 | mA | VKA = Vref | 6 | |
| Off-state cathode current | Ioff | 0.1 | 1 | µA | VKA = 36V, Vref = 0 | 6 | |
| Dynamic impedance | /ZKA/ | 0.2 | 0.5 | Ω | VKA = Vref, f ≤ 1kHz, IKA = 1mA to 100mA | 6 | |
| Cathode voltage (absolute maximum) | VKA | 37 | V | 5 | |||
| Continuous cathode current range | IKA | -100 | 150 | mA | 5 | ||
| Reference input current | II(ref) | -0.05 | 10 | mA | 5 | ||
| Operating junction temperature range | TJ | 150 | °C | 5 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 5 | ||
| Cathode voltage (recommended) | VKA | 36 | V | 5 | |||
| Continuous cathode current range (recommended) | IKA | 1 | 100 | mA | 5 | ||
| Operating free-air temperature (TL43xxC) | TA | 0 | 70 | °C | TL43xxC | 5 | |
| Junction-to-ambient thermal resistance (DBV package) | RθJA | 206 | °C/W | 5 | |||
| Junction-to-case (top) thermal resistance (DBV package) | RθJC(top) | 131 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
TL431CDBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
tl431cdbvr-etched.step/tl431cdbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tl431cdbvr.step/tl431cdbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (85 pp, sha256
ed2e90697de4e2c5, retrieved 2026-09-25, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).