component
TL431APA
Public Made by Adomby adom
PJSEMI Voltage Reference, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTL431APA
PJSEMI · Voltage Reference · SOP-8
TL431APA from PJSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Cathode | passive | Cathode is the regulated output terminal; the TL431 sinks cathode current from 1 mA to 100 mA and operates with VKA from VREF up to 36 V (absolute maximum 37 V). |
| 2 | Anode | passive | Anode is the common return terminal of the shunt regulator, and cathode current flows from the cathode into the anode. |
| 3 | Anode | passive | Anode is the common return terminal of the shunt regulator, and cathode current flows from the cathode into the anode. |
| 4 | NC | unconnected | No internal connection; this pin is not connected inside the device. |
| 5 | NC | unconnected | No internal connection; this pin is not connected inside the device. |
| 6 | Anode | passive | Anode is the common return terminal of the shunt regulator, and cathode current flows from the cathode into the anode. |
| 7 | Anode | passive | Anode is the common return terminal of the shunt regulator, and cathode current flows from the cathode into the anode. |
| 8 | Ref | input | Reference input to the internal approximately 2.495 V reference; the output voltage is set by the external divider from this pin, with typical reference input current of 1.5 µA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | PJSEMI |
| Package | SOP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reference Input Voltage (TL431A, 0.5%) | VREF | 2.483 | 2.495 | 2.507 | V | VKA=VREF, IKA=10mA (Fig1) | 4 |
| Deviation of Reference Input Voltage Over Temperature | ΔVREF | 4.5 | 17 | mV | VKA=VREF, IKA=10mA, -40°C≤TA≤+85°C (Fig1) | 4 | |
| Ratio of Change in Reference Input Voltage to Change in Cathode Voltage (10V to VREF) | ΔVREF/ΔVKA | -1 | -2.7 | mV/V | IKA=10mA, ΔVKA=10V~VREF (Fig2) | 4 | |
| Ratio of Change in Reference Input Voltage to Change in Cathode Voltage (36V to 10V) | ΔVREF/ΔVKA | -0.5 | -2 | mV/V | IKA=10mA, ΔVKA=36V~10V (Fig2) | 4 | |
| Reference Input Current | IREF | 1.5 | 4 | µA | IKA=10mA, R1=10KΩ, R2=∞ (Fig2) | 4 | |
| Deviation of Reference Input Current Over Full Temperature Range | ΔIREF | 0.4 | 1.2 | µA | IKA=10mA, R1=10KΩ, R2=∞, -20°C≤TA≤+85°C (Fig2) | 4 | |
| Minimum Cathode Current for Regulation | IKA(MIN) | 0.45 | 1 | mA | VKA=VREF (Fig1) | 4 | |
| Off-State Cathode Current | IKA(OFF) | 0.05 | 1 | µA | VKA=36V, VREF=0 (Fig3) | 4 | |
| Dynamic Impedance | ZKA | 0.15 | 0.5 | Ω | VKA=VREF, IKA=1~100mA, f≤1.0KHz | 4 | |
| Cathode Voltage (absolute maximum) | VKA | 37 | V | 3 | |||
| Cathode Current Range (Continuous) | IKA | -100 | 150 | mA | Continuous | 3 | |
| Operating Junction Temperature | TJ | 150 | °C | 3 | |||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 3 | ||
| Cathode Voltage (recommended) | VKA | 36 | V | Minimum printed as VREF (symbol, not a number) | 3 | ||
| Cathode Current | IKA | 1 | 100 | mA | 3 | ||
| Operating Ambient Temperature Range | TOPR | -40 | 125 | °C | 3 | ||
| Junction-to-Ambient Thermal Resistance (SOP-8) | RθJA | 208 | °C/W | SOP-8 package | 3 |
CAD (KiCad official)
- Symbol:
TL431APA - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
tl431apa-etched.step/tl431apa-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tl431apa.step/tl431apa.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: PJSEMI datasheet (10 pp, sha256
7c0f5f7aa8485986, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).