3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTL4051AQDBZR
Texas Instruments · Voltage Reference · SOT-23
TL4051AQDBZR from Texas Instruments, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CATHODE | passive | Cathode terminal; regulated output node where VZ is maintained; operating IZ range 60 µA (typ) to 12 mA max, absolute max continuous cathode current 20 mA. |
| 2 | ANODE | power_in | Anode terminal; connected to circuit ground/lowest supply potential; a parasitic Schottky diode exists between pin 3 and this pin, so pin 3 must be DC-referenced to this pin. |
| 3 | FB | input | Feedback input to internal error amplifier (adjustable version only); sets VZ via external resistor divider per VZ = VREF × (1 + R2/R1); IFB = 70-130 nA at 25°C, 150 nA max over full range; parasitic Schottky diode to ANODE (pin 2) requires this pin to be connected to ANODE or left open. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23 |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reference voltage tolerance (25°C) | -1.2 | 1.2 | mV | IZ = 100μA, VZ = 5V, 25°C | 8 | ||
| Reference voltage tolerance (full range) | -7.4 | 7.4 | mV | IZ = 100μA, VZ = 5V, full range TA = -40°C to 125°C | 8 | ||
| Minimum cathode current (25°C) | IZ,min | 36 | 60 | μA | TA = 25°C | 8 | |
| Minimum cathode current (full range) | IZ,min | 70 | μA | full range TA = -40°C to 125°C | 8 | ||
| Reference voltage change with cathode current (IZ,min < IZ < 1mA, 25°C) | DVREF/DIZ | 0.3 | 1.1 | mV | IZ,min < IZ < 1mA, 25°C | 8 | |
| Reference voltage change with cathode current (IZ,min < IZ < 1mA, full range) | DVREF/DIZ | 1.5 | mV | IZ,min < IZ < 1mA, full range | 8 | ||
| Reference voltage change with cathode current (1mA < IZ < 12mA, 25°C) | DVREF/DIZ | 0.6 | 6 | mV | 1mA < IZ < 12mA, 25°C | 8 | |
| Reference voltage change with cathode current (1mA < IZ < 12mA, full range) | DVREF/DIZ | 8 | mV | 1mA < IZ < 12mA, full range | 8 | ||
| Reference voltage change with cathode voltage (25°C) | DVREF/DVKA | -1.69 | -2.8 | mV/V | IZ = 1mA, 25°C | 8 | |
| Reference voltage change with cathode voltage (full range) | DVREF/DVKA | -3.5 | mV/V | IZ = 1mA, full range | 8 | ||
| Feedback current (25°C) | IFB | 70 | 130 | nA | 25°C | 8 | |
| Feedback current (full range) | IFB | 150 | nA | full range TA = -40°C to 125°C | 8 | ||
| Average temperature coefficient of VREF | αVREF | -20 | 20 | ppm/°C | IZ = 10mA, VZ = 2.5V, 25°C | 8 | |
| Average temperature coefficient of VREF | αVREF | -15 | 15 | ppm/°C | IZ = 1mA, VZ = 2.5V, 25°C | 8 | |
| Average temperature coefficient of VREF (full range) | αVREF | -50 | 50 | ppm/°C | IZ = 100μA, VZ = 2.5V, full range | 8 | |
| Reference voltage | VREF | 1.212 | V | IZ = 100μA, VZ = 5V, 25°C | 8 | ||
| Dynamic impedance (VZ = VREF) | ZZ | 0.3 | Ω | IZ = 1mA, f = 120Hz, IAC = 0.1 IZ, VZ = VREF, 25°C | 8 | ||
| Dynamic impedance (VZ = 10V) | ZZ | 2 | Ω | IZ = 1mA, f = 120Hz, IAC = 0.1 IZ, VZ = 10V, 25°C | 8 | ||
| Wideband noise | eN | 20 | μVRMS | IZ = 100μA, VZ = VREF, 10Hz ≤ f ≤ 10kHz, 25°C | 8 | ||
| Long-term stability | 120 | ppm | t = 1000h, TA = 25°C ± 0.1°C, IZ = 100μA | 8 | |||
| Thermal hysteresis | VHYST | 0.3 | mV/V | ΔTA = -40°C to 125°C | 8 | ||
| Continuous cathode current (recommended) | IZ | 12 | mA | 4 | |||
| Reverse breakdown voltage (adjustable version) | VZ | 10 | V | adjustable version | 4 | ||
| Operating ambient temperature (Q grade) | TA | -40 | 125 | °C | Q temperature grade, natural ventilation | 4 | |
| Continuous cathode voltage | VZ | 15 | V | 4 | |||
| Continuous cathode current | IZ | -10 | 20 | mA | 4 | ||
| Junction-to-ambient thermal resistance (DBZ package) | θJA | 206 | °C/W | DBZ package | 4 | ||
| Operating virtual junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 4 |
CAD (KiCad official)
- Symbol:
TL4051AQDBZR - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23 (KiCad packages3D, STEP)
- 3D model files:
tl4051aqdbzr-etched.step/tl4051aqdbzr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tl4051aqdbzr.step/tl4051aqdbzr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (33 pp, sha256
739b8ac05dcb64a5, retrieved 2026-09-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).