main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tl4050b10qdbzr: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
tl4050b10qdbzr-etched.glb tl4050b10qdbzr: factory component page (tier=mfr) · Ray
tl4050b10qdbzr-etched.step tl4050b10qdbzr: factory component page (tier=mfr) · Ray
tl4050b10qdbzr-hero.glb tl4050b10qdbzr: hero GLB from the etched model (keeps the MPN mark) · Ray
tl4050b10qdbzr-hero.overlay.json tl4050b10qdbzr: hero GLB from the etched model (keeps the MPN mark) · Ray
tl4050b10qdbzr.glb Publish 0.1.0 · Ray
tl4050b10qdbzr.kicad_mod Publish 0.1.0 · Ray
tl4050b10qdbzr.kicad_sym Publish 0.1.0 · Ray
tl4050b10qdbzr.lbr Publish 0.1.0 · Ray
tl4050b10qdbzr.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 3 pins · Ray

TL4050B10QDBZR

Texas Instruments · Voltage References · SOT-23-3

TL4050B10QDBZR from Texas Instruments, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 CATHODE passive Cathode of the two-terminal shunt reference; continuous cathode current is rated -10 to 20 mA absolute maximum, and the recommended cathode current IZ is 15 mA maximum (operating range 60 µA typ to 15 mA).
2 ANODE passive Anode of the two-terminal shunt reference; the parasitic Schottky diode sits between pins 2 and 3, so pin 3 must be floating or tied to this pin.
3 SUBSTRATE unconnected Pin 3 is attached to the substrate and must be connected to ANODE or left open, and it must not be driven independently.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-3
Category Power Supply Chip
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Reverse breakdown voltage tolerance ΔVZ -20 20 mV IZ = 100 µA, 25°C 13
Reverse breakdown voltage tolerance ΔVZ -70 70 mV IZ = 100 µA, full temperature range 13
Minimum cathode current IZ,min 80 100 µA 25°C 13
Minimum cathode current IZ,min 110 µA full temperature range 13
Average temperature coefficient of reverse breakdown voltage αVZ -40 40 ppm/°C IZ = 10 mA, 25°C 13
Average temperature coefficient of reverse breakdown voltage αVZ -20 20 ppm/°C IZ = 1 mA, 25°C 13
Average temperature coefficient of reverse breakdown voltage αVZ -50 50 ppm/°C IZ = 100 µA, full temperature range 13
Reverse breakdown voltage change with cathode current change ΔVZ 0.8 1.5 mV IZ,min < IZ < 1 mA, 25°C 13
Reverse breakdown voltage change with cathode current change ΔVZ 3.5 mV IZ,min < IZ < 1 mA, full temperature range 13
Reverse breakdown voltage change with cathode current change ΔVZ 8 12 mV 1 mA < IZ < 15 mA, 25°C 13
Reverse breakdown voltage change with cathode current change ΔVZ 23 mV 1 mA < IZ < 15 mA, full temperature range 13
Cathode current IZ 15 mA 5
Free-air temperature (Q temperature) TA -40 125 °C Q (extended) temperature grade 5
Continuous cathode current IZ -10 20 mA 5
Operating virtual junction temperature TJ 150 °C 5
Storage temperature range Tstg -65 150 °C 5
Reverse breakdown voltage VZ 10 V IZ = 100 µA, 25°C 13
Reverse dynamic impedance ZZ 0.7 Ω IZ = 1 mA, f = 120 Hz, IAC = 0.1 IZ, 25°C 13
Wideband noise eN 150 µVRMS IZ = 100 µA, 10 Hz ≤ f ≤ 10 kHz, 25°C 13
Long-term stability of reverse breakdown voltage 120 ppm t = 1000 h, TA = 25°C ± 0.1°C, IZ = 100 µA 13
Thermal hysteresis VHYST 2.8 mV ΔTA = -40°C to 125°C 13

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: TL4050B10QDBZR
  • Footprint: Package_TO_SOT_SMD:SOT-23-3
  • 3D model: SOT-23-3, generated on the KiCad land (body 1.3 x 2.92 mm, terminals on the pads, 1.12 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tl4050b10qdbzr-etched.step / tl4050b10qdbzr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tl4050b10qdbzr.step / tl4050b10qdbzr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (35 pp, sha256 55acf6318069a1f9, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF