3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTL331MDBVTEP
Texas Instruments · Comparators · SOT-23-5
TL331MDBVTEP from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN− | input | Inverting comparator input; input voltage range is -0.3 V to 36 V and common-mode range extends to VCC - 1.5 V at 25°C. |
| 2 | VCC−/GND | power_in | Negative supply or ground for single-supply operation; total supply span between the two supplies is 2 V to 36 V. |
| 3 | IN+ | input | Non-inverting comparator input; input voltage range is -0.3 V to 36 V and differential input voltage is up to ±36 V. |
| 4 | OUT | output | Open-collector output that can be wire-ORed with other open-collector outputs, with maximum output voltage 36 V and output current 20 mA. |
| 5 | VCC | power_in | Positive supply, 2 V to 36 V (absolute maximum 36 V), with supply current typically 0.4 mA independent of supply voltage. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Operational Amplifier/Comparator |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (single or split supply) | 2 | 36 | V | 1 | |||
| Operating free-air temperature range | TA | -55 | 125 | °C | Ordering information, TL331MDBVTEP | 1 | |
| Input offset voltage | VIO | 2 | 5 | mV | VCC = 5 V to 30 V, VO = 1.4 V, VIC = VIC(min); TA = 25°C | 3 | |
| Input offset voltage | VIO | 9 | mV | VCC = 5 V to 30 V, VO = 1.4 V, VIC = VIC(min); TA = -55°C to 125°C | 3 | ||
| Input offset current | IIO | 5 | 50 | nA | VO = 1.4 V; TA = 25°C | 3 | |
| Input offset current | IIO | 250 | nA | VO = 1.4 V; TA = -55°C to 125°C | 3 | ||
| Input bias current | IIB | -25 | -250 | nA | VO = 1.4 V; TA = 25°C | 3 | |
| Input bias current | IIB | -400 | nA | VO = 1.4 V; TA = -55°C to 125°C | 3 | ||
| Common-mode input voltage range (upper limit VCC, 1.5 V) | VICR | 0 | V | TA = 0 to 25°C | 3 | ||
| Common-mode input voltage range (upper limit VCC, 2 V) | VICR | 0 | V | TA = -55°C to 125°C | 3 | ||
| Large-signal differential-voltage amplification | AVD | 50 | 200 | V/mV | VCC = 15 V, VO = 1.4 V to 11.4 V, RL ≥ 15 kΩ to VCC; TA = 25°C | 3 | |
| High-level output current | IOH | 0.1 | 50 | nA | VOH = 5 V, VID = 1 V; TA = 25°C | 3 | |
| High-level output current | IOH | 1 | μA | VOH = 30 V, VID = 1 V; TA = -55°C to 125°C | 3 | ||
| Low-level output voltage | VOL | 150 | 400 | mV | IOL = 4 mA, VID = -1 V; TA = 25°C | 3 | |
| Low-level output voltage | VOL | 700 | mV | IOL = 4 mA, VID = -1 V; TA = -55°C to 125°C | 3 | ||
| Low-level output current | IOL | 6 | mA | VOL = 1.5 V, VID = -1 V; TA = 25°C | 3 | ||
| Supply current | ICC | 0.4 | 0.7 | mA | RL = ∞, VCC = 5 V; TA = 25°C | 3 | |
| Supply voltage | VCC | 36 | V | 2 | |||
| Differential input voltage | VID | -36 | 36 | V | 2 | ||
| Input voltage range (either input) | VI | -0.3 | 36 | V | 2 | ||
| Output voltage | VO | 36 | V | 2 | |||
| Output current | IO | 20 | mA | 2 | |||
| Operating virtual junction temperature | TJ | 150 | °C | 2 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 2 | ||
| Junction-to-ambient thermal resistance | θJA | 299 | °C/W | DBV 5 pins; natural convection, JEDEC high-K board (JESD51-7) | 3 | ||
| Junction-to-case (top) thermal resistance | θJCtop | 65.4 | °C/W | DBV 5 pins | 3 | ||
| Junction-to-board thermal resistance | θJB | 97.1 | °C/W | DBV 5 pins | 3 | ||
| Junction-to-top characterization parameter | ψJT | 0.8 | °C/W | DBV 5 pins | 3 | ||
| Junction-to-board characterization parameter | ψJB | 95.5 | °C/W | DBV 5 pins | 3 |
CAD (KiCad official)
- Symbol:
TL331MDBVTEP - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.45 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tl331mdbvtep-etched.step/tl331mdbvtep-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tl331mdbvtep.step/tl331mdbvtep.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (10 pp, sha256
e6f69fedc65c1941, retrieved 2026-11-11, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).