main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs tl3016cdr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tl3016cdr: viewers · Ray
package.json tl3016cdr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json tl3016cdr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/tl3016cdr · Ray
tl3016cdr-etched.fit.json tl3016cdr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tl3016cdr-etched.glb tl3016cdr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tl3016cdr-etched.step tl3016cdr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tl3016cdr.glb Publish 0.1.0 · Ray
tl3016cdr.kicad_mod Publish 0.1.0 · Ray
tl3016cdr.kicad_sym Publish 0.1.0 · Ray
tl3016cdr.lbr Publish 0.1.0 · Ray
tl3016cdr.step Publish 0.1.0 · Ray

TL3016CDR

Texas Instruments · Comparators · SOIC-8

TL3016CDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC+ power_in Positive supply, 5-V single supply or +5 V of a split ±5-V supply, with supply voltage absolute maximum of 7 V.
2 IN+ input Non-inverting comparator input with common-mode range of -3.75 V to 3.5 V at VDD = ±5 V (1.25 V to 3.5 V at VDD = 5 V).
3 IN- input Inverting comparator input with common-mode range of -3.75 V to 3.5 V at VDD = ±5 V (1.25 V to 3.5 V at VDD = 5 V).
4 VCC- power_in Negative supply for split ±5-V operation, with supply voltage absolute maximum of -7 V.
5 LATCH ENABLE input Latches the complementary outputs; low-level input VIL is 0.8 V max, high-level VIH is 2 V min, and absolute maximum input is 7 V.
6 GND power_in Network ground to which all voltages except differential voltages are referenced.
7 Q OUT (complement) output Complementary TTL-compatible comparator output with output current rating of ±20 mA absolute maximum.
8 Q OUT output TTL-compatible comparator output with output current rating of ±20 mA absolute maximum and 7.6 ns typical propagation delay.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Amplifiers/Comparators
Pins 8

CAD (KiCad official)

  • Symbol: TL3016CDR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: tl3016cdr-etched.step / tl3016cdr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tl3016cdr.step / tl3016cdr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (21 pp, sha256 1bb73b2c7e90d7bd, retrieved 2026-10-01, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF