main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tl2845dr: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
tl2845dr-etched.glb Publish 0.1.0 · Ray
tl2845dr-etched.step tl2845dr: factory component page (tier=mfr) · Ray
tl2845dr-hero.glb tl2845dr: hero GLB from the etched model (keeps the MPN mark) · Ray
tl2845dr-hero.overlay.json Publish 0.1.0 · Ray
tl2845dr.glb Publish 0.1.0 · Ray
tl2845dr.kicad_mod Publish 0.1.0 · Ray
tl2845dr.kicad_sym Publish 0.1.0 · Ray
tl2845dr.lbr Publish 0.1.0 · Ray
tl2845dr.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 14 pins · Ray

TL2845DR

Texas Instruments · AC-DC Controllers And Regulators · SOIC-14

TL2845DR from Texas Instruments, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 COMP bidirectional Error amplifier compensation pin, and the error amplifier output sink current is limited to 10 mA absolute maximum.
2 NC unconnected Do not connect; leave this pin unconnected.
3 VFB input Error amplifier input, with analog input voltage range of -0.3 V to 6.3 V absolute maximum.
4 NC unconnected Do not connect; leave this pin unconnected.
5 ISENSE input Current sense comparator input; raising the voltage above 1 V shuts down the PWM controller.
6 NC unconnected Do not connect; leave this pin unconnected.
7 RT/CT bidirectional Oscillator RC timing input, with input voltage range of 0 V to 5.5 V.
8 POWER GROUND power_in Output PWM ground terminal; the recommended voltage range is -0.1 V to 1 V (D package only).
9 GND power_in Device power supply ground terminal; all voltages are referenced to this pin.
10 OUTPUT output PWM output stage that can sink or source up to 1 A of current.
11 VC power_in Output PWM positive voltage supply, with recommended voltage up to 30 V (D package only).
12 VCC power_in Device positive voltage supply, with recommended supply voltage up to 30 V.
13 NC unconnected Do not connect; leave this pin unconnected.
14 REF output Oscillator voltage reference output, nominally 5 V, with reference output current of -20 mA recommended.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-14
Category Power Management (PMIC)
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VI analog input voltage range VI -0.3 6.3 V VFB and ISENSE 4
Output voltage VO 35 V 4
Input voltage, VC and D package only VI 35 V VC and D package only 4
Supply current ICC 30 mA 4
Output current IO -1 1 A printed as ±1 A 4
Error amplifier output sink current 10 mA 4
Virtual junction temperature TJ 150 °C 4
Output energy (capacitive load) 5 µJ capacitive load 4
Storage temperature Tstg -65 150 °C 4
VCC and VC supply voltage VCC 30 V VC recommended voltage applies to D package only (footnote 1) 4
VI RT/CT input voltage VI 0 5.5 V RT/CT 4
VI VFB and ISENSE input voltage VI 0 5.5 V VFB and ISENSE 4
VO OUTPUT output voltage VO 0 30 V OUTPUT 4
VO POWER GROUND output voltage VO -0.1 1 V POWER GROUND; D package only (footnote 1) 4
Supply current, externally limited ICC 25 mA externally limited 4
Average output current IO 200 mA 4
Reference output current IO(ref) -20 mA 4
Oscillator frequency fOSC 100 500 kHz 4
Operating free-air temperature, TL284x TA -40 85 °C TL284x 4
Output voltage 4.95 5 5.05 V IO = 1 mA, TA = 25°C 5
Line regulation 6 20 mV VCC = 12 V to 25 V 5
Load regulation 6 25 mV IO = 1 mA to 20 mA 5
Temperature coefficient of output voltage 0.2 0.4 mV/°C 5
Output voltage with worst-case variation 4.9 5.1 V VCC = 12 V to 25 V, IO = 1 mA to 20 mA 5
Output-voltage long-term drift 5 25 mV After 1000 h at TA = 25°C 5
Short-circuit output current -30 -100 -180 mA 5
Oscillator frequency 47 52 57 kHz TA = 25°C 5
Frequency change with supply voltage 2 10 Hz/kHz VCC = 12 V to 25 V 5
Feedback input voltage 2.45 2.5 2.55 V COMP at 2.5 V 5
Input bias current -0.3 -1 µA 5
Open-loop voltage amplification 65 90 dB VO = 2 V to 4 V 5
Gain-bandwidth product 0.7 1 MHz 5
Supply-voltage rejection ratio 60 70 dB VCC = 12 V to 25 V 5
Output sink current 2 6 mA VFB at 2.7 V, COMP at 1.1 V 5
Output source current -0.5 -0.8 mA VFB at 2.3 V, COMP at 5 V 5
High-level output voltage (error amplifier) 5 6 V VFB at 2.3 V, RL = 15 kΩ to GND 5
Low-level output voltage (error amplifier) 0.7 1.1 V VFB at 2.7 V, RL = 15 kΩ to GND 5
Voltage amplification 2.85 3 3.13 V/V See(4) (5) 5
Current-sense comparator threshold 0.9 1 1.1 V COMP at 5 V, see(4) 5
Input bias current (current sense) -2 -10 µA 5
Delay time to output 150 300 ns 5
High-level output voltage 13 13.5 V IOH = -20 mA 5
High-level output voltage 12 13.5 V IOH = -200 mA 5
Low-level output voltage 0.1 0.4 V IOH = 20 mA 5
Low-level output voltage 1.5 2.2 V IOH = 200 mA 5
Rise time 25 150 ns CL = 1 nF, TA = 25°C 5
Fall time 25 150 ns CL = 1 nF, TA = 25°C 5
Start threshold voltage, TLx843/TLx845 7.8 8.4 9 V TLx843, TLx845 5
Minimum operating voltage after startup, TLx843/TLx845 7 7.6 8.2 V TLx843, TLx845 5
Maximum duty cycle, TLx844/TLx845 46 48 50 % TLx844, TLx845 6
Minimum duty cycle 0 % 6
Start-up current 0.5 1 mA 6
Operating supply current 11 17 mA VFB and ISENSE at 0 V 6
Thermal resistance, junction-to-ambient (D, 14 pins) RθJA 87.9 °C/W D (SOIC) 14 pins 4

CAD (KiCad official)

  • Symbol: TL2845DR
  • Footprint: Package_SO:SOIC-14_3.9x8.7mm_P1.27mm
  • 3D model: SOIC-14 (KiCad packages3D, STEP)
  • 3D model files: tl2845dr-etched.step / tl2845dr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tl2845dr.step / tl2845dr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (30 pp, sha256 a83316c6a1cb9720, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF