3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownTL1963A-33DCYR
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223
TL1963A-33DCYR from Texas Instruments, in a SOT-223. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Regulator input supply. Accepts up to 20 V and up to VOUT+VDO minimum. A 1-uF to 10-uF bypass capacitor is required (especially when placed more than ~6 inches from the input filter cap). Reverse-battery tolerant. |
| 2 | GND | power_in | Ground reference for the regulator. The DCY package brings GND out on pin 2 as well as on the tab (pin 4). KiCad's SOT-223-3_TabPin2 joins the tab to this pad (DCY GND pins 2, 4 (tab 4)). |
| 3 | OUT | power_out | Regulated 3.3-V output, 1.5-A capable. Requires a minimum 10-uF ceramic output capacitor for stability; larger caps recommended for large transient loads. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-223 |
| Category | PMIC |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Minimum input voltage, legacy device, ILOAD = 1.5A | VIN | 2.1 | 2.5 | V | ILOAD = 1.5A, TJ = -40°C to 125°C | 9 | |
| Undervoltage lockout rising, new chip | VUVLO (RISING) | 2 | 2.2 | 2.3 | V | VIN rising, IOUT = 10mA, TJ = -40°C to 125°C | 9 |
| Undervoltage lockout falling, new chip | VUVLO (FALLING) | 1.85 | 2.05 | 2.15 | V | VIN falling, IOUT = 10mA, TJ = -40°C to 125°C | 9 |
| Regulated output voltage, legacy device, TL1963A-33 | VOUT | 3.25 | 3.3 | 3.35 | V | VIN = 3.8V, ILOAD = 1mA, TJ = 25°C | 9 |
| Regulated output voltage, legacy device, TL1963A-33 | VOUT | 3.2 | 3.3 | 3.4 | V | VIN = 4.3V to 20V, ILOAD = 1mA to 1.5A, TJ = -40°C to 125°C | 9 |
| Regulated output voltage, new chip DCY, TL1963A-33 | VOUT | 3.246 | 3.3 | 3.37 | V | VIN = 3.8V, ILOAD = 1mA, TJ = 25°C | 10 |
| Regulated output voltage, new chip DCY, TL1963A-33 | VOUT | 3.234 | 3.3 | 3.4 | V | VIN = 4.3V to 20V, ILOAD = 1mA to 1.5A, TJ = -40°C to 125°C | 10 |
| Line regulation, legacy device, TL1963A-33 | ΔVIN | 3.5 | 10 | mV | ΔVIN = 3.8V to 20V, ILOAD = 1mA, TJ = -40°C to 125°C | 10 | |
| Line regulation, new chip, TL1963A-33 | ΔVIN | 7.5 | 11.55 | mV | ΔVIN = 3.8V to 20V, ILOAD = 1mA, TJ = -40°C to 125°C | 10 | |
| Load regulation, legacy device, TL1963A-33 | ΔVOUT | 3 | 20 | mV | VIN = 4.3V, ΔILOAD = 1mA to 1.5A, TJ = 25°C | 10 | |
| Load regulation, legacy device, TL1963A-33 | ΔVOUT | 70 | mV | VIN = 4.3V, ΔILOAD = 1mA to 1.5A, TJ = -40°C to 125°C | 10 | ||
| Load regulation, new chip DCY, TL1963A-33 | ΔVOUT | 1.2 | 2.5 | mV | VIN = 4.3V, ΔILOAD = 1mA to 1.5A, TJ = 25°C | 10 | |
| Load regulation, new chip DCY, TL1963A-33 | ΔVOUT | 3.3 | mV | VIN = 4.3V, ΔILOAD = 1mA to 1.5A, TJ = -40°C to 125°C | 10 | ||
| Dropout voltage, ILOAD = 500mA | VDO | 0.12 | 0.13 | V | VIN = 3.3V, TJ = 25°C (TL1963A-33 DCY) | 10 | |
| Dropout voltage, ILOAD = 500mA | VDO | 0.18 | V | VIN = 3.3V, TJ = -40°C to 125°C | 10 | ||
| Dropout voltage, ILOAD = 1.5A | VDO | 0.34 | 0.4 | V | VIN = 3.3V, TJ = 25°C | 10 | |
| Dropout voltage, ILOAD = 1.5A | VDO | 0.53 | V | VIN = 3.3V, TJ = -40°C to 125°C | 10 | ||
| GND pin current, legacy device, ILOAD = 0mA | IGND | 1 | 1.5 | mA | VIN = VOUT(NOMINAL) + 1, TJ = -40°C to 125°C | 11 | |
| GND pin current, legacy device, ILOAD = 1.5A | IGND | 80 | 120 | mA | VIN = VOUT(NOMINAL) + 1, TJ = -40°C to 125°C | 11 | |
| GND pin current, new device, ILOAD = 1.5A | IGND | 1.1 | mA | VIN = VOUT(NOMINAL) + 1, TJ = -40°C to 125°C | 11 | ||
| Output voltage noise, legacy device | eN | 14 | µVRMS | COUT = 10µF, ILOAD = 1.5A, BW = 10Hz to 100kHz, VOUT = VADJ, TJ = 25°C | 11 | ||
| Output voltage noise, new chip | eN | 23 | µVRMS | COUT = 10µF, ILOAD = 1.5A, BW = 10Hz to 100kHz, VOUT = VADJ, TJ = 25°C | 11 | ||
| Ripple rejection, legacy device | PSRR | 55 | 63 | dB | VIN - VOUT = 1.5V (avg), VRIPPLE = 0.5VP-P, fRIPPLE = 120Hz, ILOAD = 0.75A, TJ = 25°C | 11 | |
| Ripple rejection, new chip | PSRR | 53 | 60 | dB | VIN - VOUT = 1.5V (avg), VRIPPLE = 0.5VP-P, fRIPPLE = 120Hz, ILOAD = 0.75A, TJ = 25°C | 11 | |
| Current limit, legacy device | ILIMIT | 1.6 | A | VIN = VOUT(NOMINAL) + 1, TJ = -40°C to 125°C | 11 | ||
| Current limit, new chip | ILIMIT | 1.65 | 2.75 | A | VOUT forced at 0.9 × VOUT(NOMINAL), TJ = -40°C to 125°C | 11 | |
| Current limit, new chip | ILIMIT | 2.2 | A | VOUT forced at 0.9 × VOUT(NOMINAL), TJ = 25°C | 11 | ||
| Reverse output current, legacy device, TL1963A-33 | IRO | 600 | 1200 | µA | VOUT = 3.3V, VIN < 3.3V, TJ = 25°C | 11 | |
| Reverse current steady state, new chip | IR (Steady State) | 10 | µA | VIN = 0V, VOUT ≤ 7V, TJ = -40°C to 125°C | 11 | ||
| Reverse current detection, new chip | IR | 25 | mV | VOUT, VIN at which reverse current is detected, VOUT rising, VIN = 6V, TJ = -40°C to 125°C | 11 | ||
| Reverse current protection response time, new chip | IR | 5 | µS | VIN = 6V, VOUT rising, VOUT - VIN = 300mV, TJ = -40°C to 125°C | 12 | ||
| Thermal shutdown temperature, increasing | TSD+ | 150 | 161 | °C | 12 | ||
| Thermal shutdown temperature, decreasing | TSD- | 130 | 141 | °C | 12 | ||
| Input voltage, legacy chip | VIN | 20 | V | Legacy chip; lower limit printed as VOUT + VDO | 5 | ||
| Input voltage, new chip | VIN | 2.4 | 20 | V | New chip | 5 | |
| Output current | IOUT | 0 | 1.5 | A | 5 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 5 | ||
| Input capacitor, new chip | CIN | 1 | µF | New chip | 6 | ||
| Output capacitor | COUT | 10 | µF | 6 | |||
| Output capacitor ESR (new chip) | COUT ESR | 10 | 3 | Ω | New chip; minimum printed as 10m | 6 | |
| Input voltage, legacy chip | VIN | -20 | 20 | V | Over operating temperature range | 5 | |
| Input voltage, new chip | VIN | -0.3 | 20.2 | V | Over operating temperature range | 5 | |
| Output voltage, legacy chip | VOUT | -20 | 20 | V | Over operating temperature range | 5 | |
| Output voltage, new chip, DCY | VOUT | -0.3 | 7 | V | Over operating temperature range | 5 | |
| Input-to-output differential, new chip | VIN-VOUT | -7 | 20 | V | Over operating temperature range | 5 | |
| Maximum lead temperature (10s soldering) | TLEAD | 300 | °C | 10s soldering time | 5 | ||
| Maximum junction temperature, legacy chip | TJMAX | 125 | °C | Legacy chip | 5 | ||
| Operating junction temperature, new chip | TJ | -40 | 150 | °C | New chip | 5 | |
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| Junction-to-ambient thermal resistance, legacy device (DCY, 4-pin) | RθJA | 57.9 | °C/W | Legacy device | 6 | ||
| Junction-to-ambient thermal resistance, new chip (DCY, 4-pin) | RθJA | 73.3 | °C/W | New chip | 6 | ||
| Junction-to-case (top) thermal resistance, legacy device (DCY) | RθJC(top) | 38.6 | °C/W | Legacy device | 6 | ||
| Junction-to-case (top) thermal resistance, new chip (DCY) | RθJC(top) | 44.01 | °C/W | New chip | 6 | ||
| Junction-to-board thermal resistance, legacy device (DCY) | RθJB | 7.1 | °C/W | Legacy device | 6 | ||
| Junction-to-board thermal resistance, new chip (DCY) | RθJB | 12.67 | °C/W | New chip | 6 | ||
| Junction-to-top characterization parameter, legacy device (DCY) | ψJT | 1.7 | °C/W | Legacy device | 6 | ||
| Junction-to-top characterization parameter, new chip (DCY) | ψJT | 3.56 | °C/W | New chip | 6 | ||
| Junction-to-board characterization parameter, legacy device (DCY) | ψJB | 7 | °C/W | Legacy device | 6 | ||
| Junction-to-board characterization parameter, new chip (DCY) | ψJB | 12.6 | °C/W | New chip | 6 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | ground return connections for the input and output capacitors as close to the GND pin as possible, using wide, component-side, copper planes. Do not use vias and long traces to create LDO circuit conn | 37 | |
| shell | copper | plane serves to provide accuracy of the output voltage and shield the LDO from noise. To improve the thermal performance of the device, and to maximize the current output at high ambient temperature, | 37 |
CAD (KiCad official)
- Symbol:
TL1963A-33DCYR - Footprint:
Package_TO_SOT_SMD:SOT-223-3_TabPin2 - 3D model: SOT-223 (KiCad packages3D, STEP)
- 3D model files:
tl1963a-33dcyr-etched.step/tl1963a-33dcyr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tl1963a-33dcyr.step/tl1963a-33dcyr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (60 pp, sha256
9a2da96a6fdaf2e5, retrieved 2026-11-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).