TL1963A-25DCQR

{
  "slug": "tl1963a-25dcqr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "tl1963a-25dcqr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tl1963a-25dcqr.kicad_sym",
    "tl1963a-25dcqr.kicad_mod",
    "tl1963a-25dcqr.glb",
    "tl1963a-25dcqr.step",
    "tl1963a-25dcqr.lbr",
    "docs/hero.png",
    "docs/tl1963a-25dcqr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tl1963a-25dcqr-hero.glb",
    "tl1963a-25dcqr-hero.overlay.json"
  ],
  "component": {
    "mpn": "TL1963A-25DCQR",
    "manufacturer": "Texas Instruments",
    "package": "SOT-223-6",
    "pin_count": 6,
    "category": "Power Management (PMIC)",
    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tl1963a",
    "parts": {
      "symbol": "tl1963a-25dcqr.kicad_sym",
      "footprint": "tl1963a-25dcqr.kicad_mod",
      "model_3d": "tl1963a-25dcqr-hero.glb",
      "model_3d_plain": "tl1963a-25dcqr.glb",
      "model_3d_step": "tl1963a-25dcqr-etched.step",
      "model_3d_step_plain": "tl1963a-25dcqr.step",
      "lbr": "tl1963a-25dcqr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2860639",
      "digikey": "296-24533-2-ND",
      "mouser": "595-TL1963A-25DCQR"
    },
    "distributor_check": {
      "checked_at": "2026-10-08T18:46:48Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-24533-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TL1963A-25DCQR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "SHDN",
        "type": "input",
        "description": "Driving SHDN high (above 2 V, VIH max 20 V) enables the device and driving it low (below 0.25 V) disables it; if unused it must be tied to VIN, and the pin has a weak internal pull-down so it disables the device when open."
      },
      {
        "number": "2",
        "name": "IN",
        "type": "power_in",
        "description": "Input supply pin; for the old-chip TL1963A-xx the input must be at least VOUT + VDO and no more than 20 V, and reverse-current protection applies when OUT is held above IN."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin, which must be connected to the exposed thermal pad on the PCB."
      },
      {
        "number": "4",
        "name": "OUT",
        "type": "power_out",
        "description": "Regulator output that delivers up to 1.5 A and requires a capacitor of at least 10 µF with ESR of 3 Ω or less from OUT to ground for stability, placed as close to the pin as possible."
      },
      {
        "number": "5",
        "name": "SENSE/ADJ",
        "type": "input",
        "description": "For the fixed-voltage TL1963A-25 this SENSE pin is the error-amplifier input and must be connected to OUT for proper operation, with the SENSE bias current specified as ISENSE in the electrical characteristics."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Second ground pin, which is tied to the same ground net as pin 3 and the exposed thermal pad."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The exposed thermal pad (tab) is ground and must be soldered to the PCB, but the datasheet does not ; The pin table names pin 5 'SENSE/ADJ'. For the fixed-voltage TL1963A-25 it functions as SENSE (tie t; The datasheet lists the TL1963A-25 fixed 2.5 V version among the old-chip parts (new-chip options ar"
        ],
        "pages_sent": 43,
        "cost_usd": 0.2117,
        "at": "2026-10-08T18:46:11"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tl1963a",
        "pages": 59,
        "sha256": "678bca278f2398fb",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 6,
        "described": 6,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tl1963a-25dcqr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          8.475,
          6.7,
          1.6
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "bf43e0f52215e5c8b069c660d1a580928edb1037d7f7155d98bb6d1df79e64ff",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tl1963a-25dcqr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          8.475,
          6.7,
          1.6
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c75ebaf965d7a5f02fc0bb12d5ff489d5d0d114c75eb3e15a54ad679beeebe92",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}