Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TL1431QDRQ1

Texas Instruments · Voltage Reference · SOIC-8

TL1431QDRQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CATHODE passive Cathode terminal of the shunt reference, which may be operated from VI(ref) up to 36 V with a cathode current of 1 mA to 100 mA and a minimum regulation current of 1 mA.
2 ANODE power_in Anode terminal, internally connected to pins 3, 6 and 7, and the reference point for all voltage ratings of the device.
3 ANODE power_in Anode terminal, internally connected to pins 2, 6 and 7, and the reference point for all voltage ratings of the device.
4 NC unconnected No internal connection.
5 NC unconnected No internal connection.
6 ANODE power_in Anode terminal, internally connected to pins 2, 3 and 7, and the reference point for all voltage ratings of the device.
7 ANODE power_in Anode terminal, internally connected to pins 2, 3 and 6, and the reference point for all voltage ratings of the device.
8 REF input Reference input with a nominal 2500 mV at 25°C (2470 to 2530 mV over full temperature), where the output is set by external resistors R1 and R2 and the reference input current is limited to -50 µA to 10 mA.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Power Management (PMIC)
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Reference input voltage, 25°C VI(ref) 2490 2500 2510 mV VKA = VI(ref), TA = 25°C, Figure 1 4
Reference input voltage, full range VI(ref) 2470 2530 mV VKA = VI(ref), TA = full range (−40°C to 125°C), Figure 1 4
Deviation of reference input voltage over full temperature range VI(dev) 17 55 mV VKA = VI(ref), TA = full range, Figure 1 4
Ratio of change in reference input voltage to change in cathode voltage VI(ref)/VKA -1.1 -2 mV/V ΔVKA = 3 V to 36 V, TA = full range, Figure 2 4
Reference input current, 25°C II(ref) 1.5 2.5 µA R1 = 10 kΩ, R2 = ∞, TA = 25°C, Figure 2 4
Reference input current, full range II(ref) 4 µA R1 = 10 kΩ, R2 = ∞, TA = full range, Figure 2 4
Deviation of reference input current over full temperature range II(dev) 0.5 2 µA R1 = 10 kΩ, R2 = ∞, TA = full range, Figure 2 4
Minimum cathode current for regulation, 25°C Imin 0.45 1 mA VKA = VI(ref), TA = 25°C, Figure 1 4
Off-state cathode current, 25°C Ioff 0.18 0.5 µA VKA = 36 V, VI(ref) = 0, TA = 25°C, Figure 3 4
Off-state cathode current, full range Ioff 2 µA VKA = 36 V, VI(ref) = 0, TA = full range, Figure 3 4
Output impedance, 25°C /zKA/ 0.2 0.4 Ω VKA = VI(ref), f ≤ 1 kHz, IKA = 1 mA to 100 mA, TA = 25°C, Figure 1 4
Cathode voltage (recommended) VKA 36 V 3
Cathode current (recommended) IKA 1 100 mA 3
Operating free-air temperature (recommended) TA -40 125 °C 3
Cathode voltage (absolute maximum) VKA 37 V Voltages with respect to ANODE 3
Continuous cathode current range (absolute maximum) IKA -100 150 mA 3
Reference input current range (absolute maximum, minimum) II(ref) -50 µA 3
Reference input current range (absolute maximum, maximum) II(ref) 10 mA 3
Continuous total power dissipation, D package PD 1102 mW TA ≤ 25°C; derating 10.3 mW/°C above TA = 25°C 3
Operating virtual junction temperature TJ 150 °C 3
Storage temperature range Tstg -65 150 °C 3
Lead temperature 260 °C 1,6 mm (1/16 inch) from case for 10 seconds 3
Package thermal impedance, junction to ambient θJA 97 °C/W Per JESD 51-7 (Notes 2 and 3) 3

CAD (KiCad official)

  • Symbol: TL1431QDRQ1
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: tl1431qdrq1-etched.step / tl1431qdrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tl1431qdrq1.step / tl1431qdrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (20 pp, sha256 a69149949bef0aea, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF