main
Ray
tl081cdt: specified limits as data (metadata.characteristics, 35 rows from the datasheet)
7780b24
TL081CDT
STMicroelectronics · FET Input Amplifiers · SO-8
TL081CDT from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Offset null 1 | input | Input offset voltage null adjustment terminal used with external potentiometer for offset trim. |
| 2 | Inverting input | input | Inverting input terminal of JFET input stage with input common-mode voltage range from -12 V to +15 V. |
| 3 | Non-inverting input | input | Non-inverting input terminal of JFET input stage with input common-mode voltage range from -12 V to +15 V. |
| 4 | VCC- | power_in | Negative supply voltage pin with operating range of 6 to 36 V. |
| 5 | Offset null 2 | input | Input offset voltage null adjustment terminal paired with Pin 1 for external potentiometer-based offset trimming. |
| 6 | Output | output | Output with short-circuit protection, slew rate of 16 V/µs typical, and voltage swing from 10 to 13.5 V depending on load resistance. |
| 7 | VCC+ | power_in | Positive supply voltage pin with operating range of 6 to 36 V. |
| 8 | N.C. | unconnected | No connection; pin is not used internally. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage (Rs = 50Ω), Tamb = +25°C | Vio | 3 | 10 | mV | Rs = 50Ω, Tamb = +25°C | 4 | |
| Input offset voltage (Rs = 50Ω), Tmin ≤ Tamb ≤ Tmax | Vio | 13 | mV | Rs = 50Ω, Tmin ≤ Tamb ≤ Tmax | 4 | ||
| Input offset current, Tamb = +25°C | Iio | 5 | 100 | pA | Tamb = +25°C | 4 | |
| Input offset current, Tmin ≤ Tamb ≤ Tmax | Iio | 10 | nA | Tmin ≤ Tamb ≤ Tmax | 4 | ||
| Input bias current, Tamb = +25°C | Iib | 20 | 400 | nA | Tamb = +25°C | 4 | |
| Input bias current, Tmin ≤ Tamb ≤ Tmax | Iib | 20 | nA | Tmin ≤ Tamb ≤ Tmax | 4 | ||
| Large signal voltage gain, Tamb = +25°C | Avd | 25 | 200 | V/mV | RL = 2kΩ, Vo = ±10V, Tamb = +25°C | 4 | |
| Large signal voltage gain, Tmin ≤ Tamb ≤ Tmax | Avd | 15 | V/mV | RL = 2kΩ, Vo = ±10V, Tmin ≤ Tamb ≤ Tmax | 4 | ||
| Supply voltage rejection ratio, Tamb = +25°C | SVR | 70 | 86 | dB | RS = 50Ω, Tamb = +25°C | 4 | |
| Supply voltage rejection ratio, Tmin ≤ Tamb ≤ Tmax | SVR | 70 | dB | RS = 50Ω, Tmin ≤ Tamb ≤ Tmax | 4 | ||
| Supply current, no load, Tamb = +25°C | ICC | 1.4 | 2.5 | mA | No load, Tamb = +25°C | 4 | |
| Supply current, no load, Tmin ≤ Tamb ≤ Tmax | ICC | 2.5 | mA | No load, Tmin ≤ Tamb ≤ Tmax | 4 | ||
| Input common mode voltage range | Vicm | -12 | 15 | V | 4 | ||
| Common mode rejection ratio, Tamb = +25°C | CMR | 70 | 86 | dB | RS = 50Ω, Tamb = +25°C | 4 | |
| Common mode rejection ratio, Tmin ≤ Tamb ≤ Tmax | CMR | 70 | dB | RS = 50Ω, Tmin ≤ Tamb ≤ Tmax | 4 | ||
| Output short-circuit current, Tamb = +25°C | Ios | 10 | 40 | 60 | mA | Tamb = +25°C | 4 |
| Output short-circuit current, Tmin ≤ Tamb ≤ Tmax | Ios | 10 | 60 | mA | Tmin ≤ Tamb ≤ Tmax | 4 | |
| Output voltage swing, RL = 2kΩ, Tamb = +25°C | ±Vopp | 10 | V | Tamb = +25°C, RL = 2kΩ | 4 | ||
| Output voltage swing, RL = 10kΩ, Tamb = +25°C | ±Vopp | 12 | V | Tamb = +25°C, RL = 10kΩ | 4 | ||
| Output voltage swing, RL = 2kΩ, Tmin ≤ Tamb ≤ Tmax | ±Vopp | 10 | V | Tmin ≤ Tamb ≤ Tmax, RL = 2kΩ | 4 | ||
| Output voltage swing, RL = 10kΩ, Tmin ≤ Tamb ≤ Tmax | ±Vopp | 12 | V | Tmin ≤ Tamb ≤ Tmax, RL = 10kΩ | 4 | ||
| Slew rate (Tamb = +25°C) | SR | 8 | 16 | V/µs | Vin = 10V, RL = 2kΩ, CL = 100pF, unity gain | 4 | |
| Gain bandwidth product (Tamb = +25°C) | GBP | 2.5 | 4 | MHz | Vin = 10mV, RL = 2kΩ, CL = 100pF, F = 100kHz | 5 | |
| Supply voltage (absolute maximum) | VCC | -18 | 18 | V | 3 | ||
| Input voltage (absolute maximum) | Vin | -15 | 15 | V | Must not exceed supply voltage magnitude or 15 V, whichever is less | 3 | |
| Differential input voltage (absolute maximum) | Vid | -30 | 30 | V | Non-inverting input with respect to inverting input | 3 | |
| Power dissipation | Ptot | 680 | mW | 3 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 3 | ||
| ESD HBM (human body model) | HBM | 500 | V | Human body model, 100 pF through 1.5kΩ | 3 | ||
| ESD MM (machine model) | MM | 200 | V | Machine model, 200 pF | 3 | ||
| ESD CDM (charged device model) | CDM | 1.5 | kV | Charged device model | 3 | ||
| Thermal resistance junction to ambient, SO-8 | Rthja | 125 | °C/W | SO-8; typical value | 3 | ||
| Thermal resistance junction to case, SO-8 | Rthjc | 40 | °C/W | SO-8; typical value | 3 | ||
| Supply voltage range (operating) | VCC | 6 | 36 | V | TL081C, AC, BC | 3 | |
| Operating free-air temperature range (TL081C) | Toper | 0 | 70 | °C | TL081C, AC, BC | 3 |
CAD (KiCad official)
- Symbol:
TL081CDT - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
tl081cdt-etched.step/tl081cdt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tl081cdt.step/tl081cdt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (15 pp, sha256
846025f365697397, retrieved 2026-09-26, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TL081CDT
**STMicroelectronics** · FET Input Amplifiers · SO-8
TL081CDT from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Offset null 1 | input | Input offset voltage null adjustment terminal used with external potentiometer for offset trim. |
| 2 | Inverting input | input | Inverting input terminal of JFET input stage with input common-mode voltage range from -12 V to +15 V. |
| 3 | Non-inverting input | input | Non-inverting input terminal of JFET input stage with input common-mode voltage range from -12 V to +15 V. |
| 4 | VCC- | power_in | Negative supply voltage pin with operating range of 6 to 36 V. |
| 5 | Offset null 2 | input | Input offset voltage null adjustment terminal paired with Pin 1 for external potentiometer-based offset trimming. |
| 6 | Output | output | Output with short-circuit protection, slew rate of 16 V/µs typical, and voltage swing from 10 to 13.5 V depending on load resistance. |
| 7 | VCC+ | power_in | Positive supply voltage pin with operating range of 6 to 36 V. |
| 8 | N.C. | unconnected | No connection; pin is not used internally. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage (Rs = 50Ω), Tamb = +25°C | Vio | | 3 | 10 | mV | Rs = 50Ω, Tamb = +25°C | 4 |
| Input offset voltage (Rs = 50Ω), Tmin ≤ Tamb ≤ Tmax | Vio | | | 13 | mV | Rs = 50Ω, Tmin ≤ Tamb ≤ Tmax | 4 |
| Input offset current, Tamb = +25°C | Iio | | 5 | 100 | pA | Tamb = +25°C | 4 |
| Input offset current, Tmin ≤ Tamb ≤ Tmax | Iio | | | 10 | nA | Tmin ≤ Tamb ≤ Tmax | 4 |
| Input bias current, Tamb = +25°C | Iib | | 20 | 400 | nA | Tamb = +25°C | 4 |
| Input bias current, Tmin ≤ Tamb ≤ Tmax | Iib | | | 20 | nA | Tmin ≤ Tamb ≤ Tmax | 4 |
| Large signal voltage gain, Tamb = +25°C | Avd | 25 | 200 | | V/mV | RL = 2kΩ, Vo = ±10V, Tamb = +25°C | 4 |
| Large signal voltage gain, Tmin ≤ Tamb ≤ Tmax | Avd | 15 | | | V/mV | RL = 2kΩ, Vo = ±10V, Tmin ≤ Tamb ≤ Tmax | 4 |
| Supply voltage rejection ratio, Tamb = +25°C | SVR | 70 | 86 | | dB | RS = 50Ω, Tamb = +25°C | 4 |
| Supply voltage rejection ratio, Tmin ≤ Tamb ≤ Tmax | SVR | 70 | | | dB | RS = 50Ω, Tmin ≤ Tamb ≤ Tmax | 4 |
| Supply current, no load, Tamb = +25°C | ICC | | 1.4 | 2.5 | mA | No load, Tamb = +25°C | 4 |
| Supply current, no load, Tmin ≤ Tamb ≤ Tmax | ICC | | | 2.5 | mA | No load, Tmin ≤ Tamb ≤ Tmax | 4 |
| Input common mode voltage range | Vicm | -12 | | 15 | V | | 4 |
| Common mode rejection ratio, Tamb = +25°C | CMR | 70 | 86 | | dB | RS = 50Ω, Tamb = +25°C | 4 |
| Common mode rejection ratio, Tmin ≤ Tamb ≤ Tmax | CMR | 70 | | | dB | RS = 50Ω, Tmin ≤ Tamb ≤ Tmax | 4 |
| Output short-circuit current, Tamb = +25°C | Ios | 10 | 40 | 60 | mA | Tamb = +25°C | 4 |
| Output short-circuit current, Tmin ≤ Tamb ≤ Tmax | Ios | 10 | | 60 | mA | Tmin ≤ Tamb ≤ Tmax | 4 |
| Output voltage swing, RL = 2kΩ, Tamb = +25°C | ±Vopp | 10 | | | V | Tamb = +25°C, RL = 2kΩ | 4 |
| Output voltage swing, RL = 10kΩ, Tamb = +25°C | ±Vopp | 12 | | | V | Tamb = +25°C, RL = 10kΩ | 4 |
| Output voltage swing, RL = 2kΩ, Tmin ≤ Tamb ≤ Tmax | ±Vopp | 10 | | | V | Tmin ≤ Tamb ≤ Tmax, RL = 2kΩ | 4 |
| Output voltage swing, RL = 10kΩ, Tmin ≤ Tamb ≤ Tmax | ±Vopp | 12 | | | V | Tmin ≤ Tamb ≤ Tmax, RL = 10kΩ | 4 |
| Slew rate (Tamb = +25°C) | SR | 8 | 16 | | V/µs | Vin = 10V, RL = 2kΩ, CL = 100pF, unity gain | 4 |
| Gain bandwidth product (Tamb = +25°C) | GBP | 2.5 | 4 | | MHz | Vin = 10mV, RL = 2kΩ, CL = 100pF, F = 100kHz | 5 |
| Supply voltage (absolute maximum) | VCC | -18 | | 18 | V | | 3 |
| Input voltage (absolute maximum) | Vin | -15 | | 15 | V | Must not exceed supply voltage magnitude or 15 V, whichever is less | 3 |
| Differential input voltage (absolute maximum) | Vid | -30 | | 30 | V | Non-inverting input with respect to inverting input | 3 |
| Power dissipation | Ptot | | | 680 | mW | | 3 |
| Storage temperature range | Tstg | -65 | | 150 | °C | | 3 |
| ESD HBM (human body model) | HBM | | | 500 | V | Human body model, 100 pF through 1.5kΩ | 3 |
| ESD MM (machine model) | MM | | | 200 | V | Machine model, 200 pF | 3 |
| ESD CDM (charged device model) | CDM | | | 1.5 | kV | Charged device model | 3 |
| Thermal resistance junction to ambient, SO-8 | Rthja | | 125 | | °C/W | SO-8; typical value | 3 |
| Thermal resistance junction to case, SO-8 | Rthjc | | 40 | | °C/W | SO-8; typical value | 3 |
| Supply voltage range (operating) | VCC | 6 | | 36 | V | TL081C, AC, BC | 3 |
| Operating free-air temperature range (TL081C) | Toper | 0 | | 70 | °C | TL081C, AC, BC | 3 |
## CAD (KiCad official)
- Symbol: `TL081CDT`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files: `tl081cdt-etched.step` / `tl081cdt-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tl081cdt.step` / `tl081cdt.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588879943656738816) (15 pp, sha256 `846025f365697397`, retrieved 2026-09-26, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tl081cdt-datasheet.pdf)