3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTL074ACDT
STMicroelectronics · FET Input Amplifiers · SOIC-14
TL074ACDT from STMicroelectronics, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Output 1 | output | Output of operational amplifier 1, with high impedance and short-circuit protection. |
| 2 | Inverting Input 1 | input | Inverting input of operational amplifier 1 with high impedance JFET input stage. |
| 3 | Non-inverting Input 1 | input | Non-inverting input of operational amplifier 1 with high impedance JFET input stage. |
| 4 | VCC- | power_in | Negative supply voltage pin (VSS, ground reference for dual supply operation). |
| 5 | Non-inverting Input 2 | input | Non-inverting input of operational amplifier 2 with high impedance JFET input stage. |
| 6 | Inverting Input 2 | input | Inverting input of operational amplifier 2 with high impedance JFET input stage. |
| 7 | Output 2 | output | Output of operational amplifier 2, with high impedance and short-circuit protection. |
| 8 | VCC+ | power_in | Positive supply voltage pin for all four operational amplifiers. |
| 9 | Output 3 | output | Output of operational amplifier 3, with high impedance and short-circuit protection. |
| 10 | Inverting Input 3 | input | Inverting input of operational amplifier 3 with high impedance JFET input stage. |
| 11 | Non-inverting Input 3 | input | Non-inverting input of operational amplifier 3 with high impedance JFET input stage. |
| 12 | Inverting Input 4 | input | Inverting input of operational amplifier 4 with high impedance JFET input stage. |
| 13 | Non-inverting Input 4 | input | Non-inverting input of operational amplifier 4 with high impedance JFET input stage. |
| 14 | Output 4 | output | Output of operational amplifier 4, with high impedance and short-circuit protection. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOIC-14 |
| Category | Amplifiers/Comparators |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage (Rs = 50Ω), Tamb = +25°C | Vio | 6 | mV | Rs = 50Ω, Tamb = +25°C, VCC = ±15 V | 5 | ||
| Input offset voltage (Rs = 50Ω), Tmin ≤ Tamb ≤ Tmax | Vio | 7 | mV | Rs = 50Ω, Tmin ≤ Tamb ≤ Tmax | 5 | ||
| Input offset current, Tamb = +25°C | Iio | 5 | 100 | pA | Tamb = +25°C, VCC = ±15 V | 5 | |
| Input offset current, Tmin ≤ Tamb ≤ Tmax | Iio | 10 | nA | Tmin ≤ Tamb ≤ Tmax | 5 | ||
| Input bias current, Tamb = +25°C | Iib | 30 | 200 | pA | Tamb = +25°C, VCC = ±15 V | 5 | |
| Input bias current, Tmin ≤ Tamb ≤ Tmax | Iib | 20 | nA | Tmin ≤ Tamb ≤ Tmax | 5 | ||
| Large signal voltage gain, Tamb = +25°C | Avd | 25 | 200 | V/mV | RL = 2kΩ, Vo = ±10V, Tamb = +25°C | 5 | |
| Large signal voltage gain, Tmin ≤ Tamb ≤ Tmax | Avd | 15 | V/mV | RL = 2kΩ, Vo = ±10V, Tmin ≤ Tamb ≤ Tmax | 5 | ||
| Supply voltage rejection ratio, Tamb = +25°C | SVR | 80 | 86 | dB | RS = 50Ω, Tamb = +25°C | 5 | |
| Supply voltage rejection ratio, Tmin ≤ Tamb ≤ Tmax | SVR | 70 | dB | RS = 50Ω, Tmin ≤ Tamb ≤ Tmax | 5 | ||
| Supply current, no load, Tamb = +25°C | ICC | 1.4 | 2.5 | mA | No load, Tamb = +25°C, VCC = ±15 V | 5 | |
| Supply current, no load, Tmin ≤ Tamb ≤ Tmax | ICC | 2.5 | mA | No load, Tmin ≤ Tamb ≤ Tmax | 5 | ||
| Input common mode voltage range | Vicm | -12 | 15 | V | VCC = ±15 V | 5 | |
| Common mode rejection ratio, Tamb = +25°C | CMR | 80 | 86 | dB | RS = 50Ω, Tamb = +25°C | 5 | |
| Common mode rejection ratio, Tmin ≤ Tamb ≤ Tmax | CMR | 70 | dB | RS = 50Ω, Tmin ≤ Tamb ≤ Tmax | 5 | ||
| Output short-circuit current, Tamb = +25°C | Ios | 10 | 40 | 60 | mA | Tamb = +25°C | 5 |
| Output short-circuit current, Tmin ≤ Tamb ≤ Tmax | Ios | 10 | 60 | mA | Tmin ≤ Tamb ≤ Tmax | 5 | |
| Output voltage swing, Tamb = +25°C, RL = 2kΩ | ±Vopp | 10 | V | Tamb = +25°C, RL = 2kΩ | 5 | ||
| Output voltage swing, Tamb = +25°C, RL = 10kΩ | ±Vopp | 12 | V | Tamb = +25°C, RL = 10kΩ | 5 | ||
| Output voltage swing, Tmin ≤ Tamb ≤ Tmax, RL = 2kΩ | ±Vopp | 10 | V | Tmin ≤ Tamb ≤ Tmax, RL = 2kΩ | 5 | ||
| Output voltage swing, Tmin ≤ Tamb ≤ Tmax, RL = 10kΩ | ±Vopp | 12 | V | Tmin ≤ Tamb ≤ Tmax, RL = 10kΩ | 5 | ||
| Slew rate | SR | 8 | 13 | V/µs | Vin = 10V, RL = 2kΩ, CL = 100pF, unity gain | 5 | |
| Gain bandwidth product | GBP | 2 | 3 | MHz | Vin = 10mV, RL = 2kΩ, CL = 100pF, f = 100kHz | 6 | |
| Supply voltage | VCC | 6 | 36 | V | Operating conditions | 4 | |
| Operating free-air temperature range (TL074AC, commercial) | Toper | 0 | 70 | °C | C-grade (TL074C, AC, BC) | 4 | |
| Supply voltage | VCC | -18 | 18 | V | Absolute maximum, referenced to midpoint of VCC+ and VCC- | 4 | |
| Input voltage | Vi | -15 | 15 | V | Must not exceed supply magnitude or 15 V, whichever is less | 4 | |
| Differential input voltage | Vid | -30 | 30 | V | Non-inverting input with respect to inverting input | 4 | |
| Power dissipation | Ptot | 680 | mW | 4 | |||
| Thermal resistance junction to ambient, SO14 | Rthja | 105 | °C/W | SO14, Rth values are typical | 4 | ||
| Thermal resistance junction to case, SO14 | Rthjc | 31 | °C/W | SO14, Rth values are typical | 4 | ||
| Operating free-air temperature range (C grade) | Toper | 0 | 70 | °C | C-grade (TL074C, AC, BC) | 4 | |
| Storage temperature range | Tstg | -65 | 150 | °C | 4 | ||
| ESD human body model | 1 | kV | HBM, 100pF through 1.5kΩ | 4 | |||
| ESD machine model | 200 | V | MM, 200pF cap | 4 | |||
| ESD charged device model | 1.5 | kV | CDM | 4 |
CAD (KiCad official)
- Symbol:
TL074ACDT - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOIC-14 (KiCad packages3D, STEP)
- 3D model files:
tl074acdt-etched.step/tl074acdt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tl074acdt.step/tl074acdt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (18 pp, sha256
d09153516934dfc8, retrieved 2026-09-29, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).