main
Ray
Publish 0.1.0
c135a60
TL072QDREP
Texas Instruments · FET Input Amplifiers · SOIC-8
TL072QDREP from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Output of amplifier 1; the output may be shorted to ground or to either supply for an unlimited duration if temperature and supply voltages keep dissipation within the rating. |
| 2 | 1IN− | input | Inverting input of amplifier 1; the input voltage magnitude must never exceed the supply voltage or 15 V, whichever is less. |
| 3 | 1IN+ | input | Non-inverting input of amplifier 1; the differential input voltage (IN+ with respect to IN−) is rated ±30 V. |
| 4 | VCC− | power_in | Negative supply rail with an absolute maximum rating of 18 V; all voltage values except differential voltages are referenced to the midpoint between VCC+ and VCC−. |
| 5 | 2IN+ | input | Non-inverting input of amplifier 2; the input voltage magnitude must never exceed the supply voltage or 15 V, whichever is less. |
| 6 | 2IN− | input | Inverting input of amplifier 2; the input voltage magnitude must never exceed the supply voltage or 15 V, whichever is less. |
| 7 | 2OUT | output | Output of amplifier 2; the output may be shorted to ground or to either supply for an unlimited duration if temperature and supply voltages keep dissipation within the rating. |
| 8 | VCC+ | power_in | Positive supply rail with an absolute maximum rating of 18 V; the common-mode input voltage range includes VCC+. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage (25 °C) | VIO | 3 | 6 | mV | TA = 25 °C; VO = 0, RS = 50 Ω | 4 | |
| Input offset voltage (Full range) | VIO | 8 | mV | TA = Full range (−40 °C to 125 °C); VO = 0, RS = 50 Ω | 4 | ||
| Input offset current (25 °C) | IIO | 5 | 100 | pA | TA = 25 °C; VO = 0 | 4 | |
| Input bias current (25 °C) | IIB | 65 | 200 | pA | TA = 25 °C; VO = 0 | 4 | |
| Common-mode input voltage range | VICR | -12 | 15 | V | TA = 25 °C | 4 | |
| Maximum peak output voltage swing (RL = 10 kΩ) | VOM | 12 | 13.5 | V | TA = 25 °C; RL = 10 kΩ | 4 | |
| Maximum peak output voltage swing (Full range, RL ≥ 10 kΩ) | VOM | 12 | V | TA = Full range; RL ≥ 10 kΩ | 4 | ||
| Maximum peak output voltage swing (Full range, RL ≥ 2 kΩ) | VOM | 10 | V | TA = Full range; RL ≥ 2 kΩ | 4 | ||
| Large-signal differential voltage amplification (25 °C) | AVD | 35 | 200 | V/mV | TA = 25 °C; VO = ±10 V, RL ≥ 2 kΩ | 4 | |
| Large-signal differential voltage amplification (Full range) | AVD | 15 | V/mV | TA = Full range; VO = ±10 V, RL ≥ 2 kΩ | 4 | ||
| Common-mode rejection ratio | CMRR | 80 | 86 | dB | TA = 25 °C; VIC = VICRmin, VO = 0, RS = 50 Ω | 4 | |
| Supply-voltage rejection ratio | kSVR | 80 | 86 | dB | TA = 25 °C; VCC = ±9 V to ±15 V, VO = 0, RS = 50 Ω | 4 | |
| Supply current per amplifier | ICC | 1.4 | 2.5 | mA | TA = 25 °C; VO = 0, No load | 4 | |
| Slew rate at unity gain | SR | 8 | 13 | V/μs | VI = 10 V, RL = 2 kΩ, CL = 100 pF, See Figure 1 | 4 | |
| Unity-gain bandwidth | B1 | 3 | MHz | TA = 25 °C | 4 | ||
| Input offset voltage temperature coefficient | αVIO | 18 | μV/°C | TA = Full range; VO = 0, RS = 50 Ω | 4 | ||
| Input offset current (125 °C) | IIO | 2 | nA | TA = 125 °C; VO = 0 | 4 | ||
| Input bias current (125 °C) | IIB | 20 | nA | TA = 125 °C; VO = 0 | 4 | ||
| Crosstalk attenuation | VO1/VO2 | 120 | dB | AVD = 100 | 4 | ||
| Rise time | tr | 0.1 | μs | VI = 20 V, RL = 2 kΩ, CL = 100 pF, See Figure 1 | 4 | ||
| Rise-time overshoot factor | 20 | % | VI = 20 V, RL = 2 kΩ, CL = 100 pF, See Figure 1 | 4 | |||
| Equivalent input noise voltage (f = 1 kHz) | Vn | 18 | nV/√Hz | f = 1 kHz; RS = 20 Ω | 4 | ||
| Equivalent input noise voltage (f = 10 Hz to 10 kHz) | Vn | 4 | μV | f = 10 Hz to 10 kHz; RS = 20 Ω | 4 | ||
| Equivalent input noise current | In | 0.01 | pA/√Hz | RS = 20 Ω, f = 1 kHz | 4 | ||
| Total harmonic distortion | THD | 0.003 | % | VI(rms) = 6 V, AVD = 1, RL ≥ 2 kΩ, RS ≤ 1 kΩ, f = 1 kHz | 4 | ||
| Supply voltage (VCC+) | VCC+ | 18 | V | 3 | |||
| Supply voltage (VCC−) | VCC− | 18 | V | 3 | |||
| Differential input voltage | VID | -30 | 30 | V | Differential voltages are at IN+, with respect to IN− | 3 | |
| Input voltage | VI | -15 | 15 | V | Magnitude must not exceed supply voltage or 15 V, whichever is less | 3 | |
| Thermal resistance, junction-to-ambient (TL072) | θJA | 97.5 | °C/W | TL072 (D package), per JESD 51-7 | 3 | ||
| Thermal resistance, junction-to-case (TL072) | θJC | 38.3 | °C/W | TL072 (D package), per JESD 51-7 | 3 | ||
| Operating virtual junction temperature | TJ | 150 | °C | 3 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 3 | ||
| Operating free-air temperature (TL072Q) | TA | -40 | 125 | °C | TL072Q (Full range for TL07xQ) | 1 |
CAD (KiCad official)
- Symbol:
TL072QDREP - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
tl072qdrep-etched.step/tl072qdrep-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tl072qdrep.step/tl072qdrep.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (23 pp, sha256
f6d4f5eca481e818, retrieved 2026-11-11, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TL072QDREP
**Texas Instruments** · FET Input Amplifiers · SOIC-8
TL072QDREP from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Output of amplifier 1; the output may be shorted to ground or to either supply for an unlimited duration if temperature and supply voltages keep dissipation within the rating. |
| 2 | 1IN− | input | Inverting input of amplifier 1; the input voltage magnitude must never exceed the supply voltage or 15 V, whichever is less. |
| 3 | 1IN+ | input | Non-inverting input of amplifier 1; the differential input voltage (IN+ with respect to IN−) is rated ±30 V. |
| 4 | VCC− | power_in | Negative supply rail with an absolute maximum rating of 18 V; all voltage values except differential voltages are referenced to the midpoint between VCC+ and VCC−. |
| 5 | 2IN+ | input | Non-inverting input of amplifier 2; the input voltage magnitude must never exceed the supply voltage or 15 V, whichever is less. |
| 6 | 2IN− | input | Inverting input of amplifier 2; the input voltage magnitude must never exceed the supply voltage or 15 V, whichever is less. |
| 7 | 2OUT | output | Output of amplifier 2; the output may be shorted to ground or to either supply for an unlimited duration if temperature and supply voltages keep dissipation within the rating. |
| 8 | VCC+ | power_in | Positive supply rail with an absolute maximum rating of 18 V; the common-mode input voltage range includes VCC+. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage (25 °C) | VIO | | 3 | 6 | mV | TA = 25 °C; VO = 0, RS = 50 Ω | 4 |
| Input offset voltage (Full range) | VIO | | | 8 | mV | TA = Full range (−40 °C to 125 °C); VO = 0, RS = 50 Ω | 4 |
| Input offset current (25 °C) | IIO | | 5 | 100 | pA | TA = 25 °C; VO = 0 | 4 |
| Input bias current (25 °C) | IIB | | 65 | 200 | pA | TA = 25 °C; VO = 0 | 4 |
| Common-mode input voltage range | VICR | -12 | | 15 | V | TA = 25 °C | 4 |
| Maximum peak output voltage swing (RL = 10 kΩ) | VOM | 12 | 13.5 | | V | TA = 25 °C; RL = 10 kΩ | 4 |
| Maximum peak output voltage swing (Full range, RL ≥ 10 kΩ) | VOM | 12 | | | V | TA = Full range; RL ≥ 10 kΩ | 4 |
| Maximum peak output voltage swing (Full range, RL ≥ 2 kΩ) | VOM | 10 | | | V | TA = Full range; RL ≥ 2 kΩ | 4 |
| Large-signal differential voltage amplification (25 °C) | AVD | 35 | 200 | | V/mV | TA = 25 °C; VO = ±10 V, RL ≥ 2 kΩ | 4 |
| Large-signal differential voltage amplification (Full range) | AVD | 15 | | | V/mV | TA = Full range; VO = ±10 V, RL ≥ 2 kΩ | 4 |
| Common-mode rejection ratio | CMRR | 80 | 86 | | dB | TA = 25 °C; VIC = VICRmin, VO = 0, RS = 50 Ω | 4 |
| Supply-voltage rejection ratio | kSVR | 80 | 86 | | dB | TA = 25 °C; VCC = ±9 V to ±15 V, VO = 0, RS = 50 Ω | 4 |
| Supply current per amplifier | ICC | | 1.4 | 2.5 | mA | TA = 25 °C; VO = 0, No load | 4 |
| Slew rate at unity gain | SR | 8 | 13 | | V/μs | VI = 10 V, RL = 2 kΩ, CL = 100 pF, See Figure 1 | 4 |
| Unity-gain bandwidth | B1 | | 3 | | MHz | TA = 25 °C | 4 |
| Input offset voltage temperature coefficient | αVIO | | 18 | | μV/°C | TA = Full range; VO = 0, RS = 50 Ω | 4 |
| Input offset current (125 °C) | IIO | | 2 | | nA | TA = 125 °C; VO = 0 | 4 |
| Input bias current (125 °C) | IIB | | 20 | | nA | TA = 125 °C; VO = 0 | 4 |
| Crosstalk attenuation | VO1/VO2 | | 120 | | dB | AVD = 100 | 4 |
| Rise time | tr | | 0.1 | | μs | VI = 20 V, RL = 2 kΩ, CL = 100 pF, See Figure 1 | 4 |
| Rise-time overshoot factor | | | 20 | | % | VI = 20 V, RL = 2 kΩ, CL = 100 pF, See Figure 1 | 4 |
| Equivalent input noise voltage (f = 1 kHz) | Vn | | 18 | | nV/√Hz | f = 1 kHz; RS = 20 Ω | 4 |
| Equivalent input noise voltage (f = 10 Hz to 10 kHz) | Vn | | 4 | | μV | f = 10 Hz to 10 kHz; RS = 20 Ω | 4 |
| Equivalent input noise current | In | | 0.01 | | pA/√Hz | RS = 20 Ω, f = 1 kHz | 4 |
| Total harmonic distortion | THD | | 0.003 | | % | VI(rms) = 6 V, AVD = 1, RL ≥ 2 kΩ, RS ≤ 1 kΩ, f = 1 kHz | 4 |
| Supply voltage (VCC+) | VCC+ | | | 18 | V | | 3 |
| Supply voltage (VCC−) | VCC− | | | 18 | V | | 3 |
| Differential input voltage | VID | -30 | | 30 | V | Differential voltages are at IN+, with respect to IN− | 3 |
| Input voltage | VI | -15 | | 15 | V | Magnitude must not exceed supply voltage or 15 V, whichever is less | 3 |
| Thermal resistance, junction-to-ambient (TL072) | θJA | | 97.5 | | °C/W | TL072 (D package), per JESD 51-7 | 3 |
| Thermal resistance, junction-to-case (TL072) | θJC | | 38.3 | | °C/W | TL072 (D package), per JESD 51-7 | 3 |
| Operating virtual junction temperature | TJ | | | 150 | °C | | 3 |
| Storage temperature range | Tstg | -65 | | 150 | °C | | 3 |
| Operating free-air temperature (TL072Q) | TA | -40 | | 125 | °C | TL072Q (Full range for TL07xQ) | 1 |
## CAD (KiCad official)
- Symbol: `TL072QDREP`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `tl072qdrep-etched.step` / `tl072qdrep-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tl072qdrep.step` / `tl072qdrep.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tl072-ep) (23 pp, sha256 `f6d4f5eca481e818`, retrieved 2026-11-11, tier: manufacturer)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tl072qdrep-datasheet.pdf)