component

TL072

Public Made by Adom

by adom

TI dual JFET-input op-amp, SOIC-8. 3 MHz GBW, 13 V/us slew, high input impedance, low noise. Datasheet-verified.

componentamplifierop-ampjfetaudiosoic-8texas-instruments
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Made with kicad-footprint-generator 10.0 · KiCad file format 20260206
Name Last commit message Last updated
docs tl072: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 1mo ago
viewers cross-highlight symbol + footprint viewers · Ray 2mo ago
package.json Publish 0.1.0 · Ray 2mo ago
page.json tl072: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body with… · Ray 9d ago
README.md tl072: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray 1mo ago
tl072-etched.fit.json tl072: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 1mo ago
tl072-etched.glb tl072: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body with… · Ray 9d ago
tl072-etched.step tl072: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body with… · Ray 9d ago
TL072.adom-lbr.json TL072: validated Fusion/EAGLE library + adom-lbr hub, generated from this page's KiCad sources · Ray 2mo ago
tl072.glb Publish 0.1.0 · Ray 2mo ago
tl072.kicad_mod Publish 0.1.0 · Ray 2mo ago
tl072.kicad_sym Publish 0.1.0 · Ray 2mo ago
tl072.lbr add validated EAGLE .lbr (Fusion library) · Ray 2mo ago
TL072.lbr TL072: validated Fusion/EAGLE library + adom-lbr hub, generated from this page's KiCad sources · Ray 2mo ago
tl072.step add .step (Fusion 3D source) · Ray 2mo ago

TL072

Texas Instruments · Dual JFET-input op-amp · SOIC-8

A dual JFET-input operational amplifier in a SOIC-8, a longtime favorite for audio and active filters. The JFET front end gives very high input impedance and low input bias current, so it does not load high-impedance sources, and it pairs a 3 MHz gain-bandwidth with a fast 13 V/us slew rate and low noise. Two independent amplifiers share the split supply, which runs up to plus/minus 18 V. It is the go-to op-amp for guitar pedals, mixers, and Sallen-Key filters.

Pinout

Pin Name Type Function
1 1OUT output Output of amplifier channel 1. Push-pull class-AB output with short-circuit protection; can drive typical op-amp loads within ±(VCC−headroom).
2 1IN- input Inverting input of amplifier channel 1. High-impedance JFET gate input; low input bias current.
3 1IN+ input Noninverting input of amplifier channel 1. High-impedance JFET gate input; common-mode input range includes VCC+.
4 VCC- power_in Negative supply rail. Connect to −2.25 V to −20 V (split supply) or GND (single supply). Total supply span 4.5 V to 40 V.
5 2IN+ input Noninverting input of amplifier channel 2. High-impedance JFET gate input; common-mode input range includes VCC+.
6 2IN- input Inverting input of amplifier channel 2. High-impedance JFET gate input; low input bias current.
7 2OUT output Output of amplifier channel 2. Push-pull class-AB output with short-circuit protection.
8 VCC+ power_in Positive supply rail. Connect to +2.25 V to +20 V (split supply) or 4.5 V to 40 V (single supply). Bypass to VCC− with 100 nF close to the pin.

Key specifications

Parameter Value
Type Dual JFET-input op-amp
Gain-bandwidth 3 MHz
Slew rate 13 V/µs
Input impedance very high (JFET)
Input bias current typ. 65 pA
Supply voltage ±3 to ±18 V
Channels 2 independent
Package SOIC-8

Ordering variants

Same part, different packaging or reel option.

  • TL072CD (SOIC-8, tube)
  • TL072CDR (SOIC-8, tape & reel)

CAD (KiCad official)

  • Symbol: Amplifier_Operational:TL072
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D)
  • 3D model files: tl072-etched.step / tl072-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tl072.step / tl072.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (89 pp, sha256 40b14981bad45917, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF