component
TL071IP
Public Made by Adomby adom
Texas Instruments FET Input Amplifiers, PDIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+45@@ -0,0 +1,45 @@+# TL071IP++**Texas Instruments** · FET Input Amplifiers · PDIP-8++TL071IP from Texas Instruments, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | NC | unconnected | Not internally connected on the PDIP-8 (P) package; the datasheet lists no function for this pin. |+| 2 | IN- | input | Inverting input; the absolute maximum common-mode voltage for this device (not an NS/PS package) is (VCC-) - 0.5 V to (VCC+) + 0.5 V, and input current must be limited to 10 mA for signals that swing more than 0.5 V beyond the supply rails. |+| 3 | IN+ | input | Non-inverting input; the absolute maximum common-mode voltage for this device (not an NS/PS package) is (VCC-) - 0.5 V to (VCC+) + 0.5 V, and input current must be limited to 10 mA for signals that swing more than 0.5 V beyond the supply rails. |+| 4 | VCC- | power_in | Negative power supply; the total supply VS = (VCC+) - (VCC-) must be within 4.5 V to 40 V (±2.25 V to ±20 V), and VCC+ and VCC- need not have equal magnitude. |+| 5 | NC | unconnected | Not internally connected on the PDIP-8 (P) package; the datasheet lists no function for this pin. |+| 6 | OUT | output | Amplifier output; the datasheet rates output short-circuit to ground as continuous (per-amplifier, applies to the package). |+| 7 | VCC+ | power_in | Positive power supply; the total supply VS must stay within 4.5 V to 40 V recommended, with an absolute maximum of 42 V for this device (not an NS/PS package). |+| 8 | NC | unconnected | Not internally connected on the PDIP-8 (P) package; the datasheet lists no function for this pin. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | PDIP-8 |+| Category | Amplifiers/Comparators |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `TL071IP`+- Footprint: `Package_DIP:DIP-8_W7.62mm`+- 3D model: PDIP-8 (KiCad packages3D, STEP)+- 3D model files: `tl071ip-etched.step` / `tl071ip-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tl071ip.step` / `tl071ip.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tl074a) (90 pp, sha256 `ec4a201e6b0fe15d`, retrieved 2026-10-08, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tl071ip-datasheet.pdf)
page.jsonadded+200@@ -0,0 +1,200 @@+{+ "slug": "tl071ip",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments FET Input Amplifiers, PDIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "amplifiers-comparators",+ "tl071ip",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tl071ip.kicad_sym",+ "tl071ip.kicad_mod",+ "tl071ip.glb",+ "tl071ip.step",+ "tl071ip.lbr",+ "docs/hero.png",+ "docs/tl071ip-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "tl071ip-hero.glb",+ "tl071ip-hero.overlay.json"+ ],+ "component": {+ "mpn": "TL071IP",+ "manufacturer": "Texas Instruments",+ "package": "PDIP-8",+ "pin_count": 8,+ "category": "Amplifiers/Comparators",+ "subcategory": "FET Input Amplifiers",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tl074a",+ "parts": {+ "symbol": "tl071ip.kicad_sym",+ "footprint": "tl071ip.kicad_mod",+ "model_3d": "tl071ip-hero.glb",+ "model_3d_plain": "tl071ip.glb",+ "model_3d_step": "tl071ip-etched.step",+ "model_3d_step_plain": "tl071ip.step",+ "lbr": "tl071ip.lbr"+ },+ "distributor_links": {+ "lcsc": "C2872513",+ "digikey": "296-7188-5-ND",+ "mouser": "595-TL071IP"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T00:24:24Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-7188-5-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-TL071IP",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "NC",+ "type": "unconnected",+ "description": "Not internally connected on the PDIP-8 (P) package; the datasheet lists no function for this pin."+ },+ {+ "number": "2",+ "name": "IN–",+ "type": "input",+ "description": "Inverting input; the absolute maximum common-mode voltage for this device (not an NS/PS package) is (VCC-) - 0.5 V to (VCC+) + 0.5 V, and input current must be limited to 10 mA for signals that swing more than 0.5 V beyond the supply rails."+ },+ {+ "number": "3",+ "name": "IN+",+ "type": "input",+ "description": "Non-inverting input; the absolute maximum common-mode voltage for this device (not an NS/PS package) is (VCC-) - 0.5 V to (VCC+) + 0.5 V, and input current must be limited to 10 mA for signals that swing more than 0.5 V beyond the supply rails."+ },+ {+ "number": "4",+ "name": "VCC–",+ "type": "power_in",+ "description": "Negative power supply; the total supply VS = (VCC+) - (VCC-) must be within 4.5 V to 40 V (±2.25 V to ±20 V), and VCC+ and VCC- need not have equal magnitude."+ },+ {+ "number": "5",+ "name": "NC",+ "type": "unconnected",+ "description": "Not internally connected on the PDIP-8 (P) package; the datasheet lists no function for this pin."+ },+ {+ "number": "6",+ "name": "OUT",+ "type": "output",+ "description": "Amplifier output; the datasheet rates output short-circuit to ground as continuous (per-amplifier, applies to the package)."+ },+ {+ "number": "7",+ "name": "VCC+",+ "type": "power_in",+ "description": "Positive power supply; the total supply VS must stay within 4.5 V to 40 V recommended, with an absolute maximum of 42 V for this device (not an NS/PS package)."+ },+ {+ "number": "8",+ "name": "NC",+ "type": "unconnected",+ "description": "Not internally connected on the PDIP-8 (P) package; the datasheet lists no function for this pin."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Pinout taken from the P (PDIP-8) column of Table 4-1 and confirmed by Figure 4-3 (8-pin SOIC/PDIP to; The schema has no specs field, so headline specs are noted here. Recommended supply VS is 4.5 V to 4; Pin 4 (VCC-) and pin 7 (VCC+) are typed as power_in, as the datasheet only labels them as power pins"+ ],+ "pages_sent": 25,+ "cost_usd": 0.1338,+ "at": "2026-10-08T00:24:08"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tl074a",+ "pages": 90,+ "sha256": "ec4a201e6b0fe15d",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "tl071ip.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "body on z = 0, through-hole leads below",+ "extents_mm": [+ 7.874,+ 9.27,+ 6.98+ ],+ "zmin_mm": -3.3,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "4a377a56a8d9e9c0b86c095ef9ecc1869ac19e7f5069a3247b294250bf4f235d",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tl071ip-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "body on z = 0, through-hole leads below",+ "extents_mm": [+ 7.874,+ 9.27,+ 6.98+ ],+ "zmin_mm": -3.3,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "f0e3e9e06a94a808c820d37d93977b7be217eb4b4638f890db8fbe64d14e5ea3",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}