component
TL071IP
Public Made by Adomby adom
Texas Instruments FET Input Amplifiers, PDIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTL071IP
Texas Instruments · FET Input Amplifiers · PDIP-8
TL071IP from Texas Instruments, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Not internally connected on the PDIP-8 (P) package; the datasheet lists no function for this pin. |
| 2 | IN- | input | Inverting input; the absolute maximum common-mode voltage for this device (not an NS/PS package) is (VCC-) - 0.5 V to (VCC+) + 0.5 V, and input current must be limited to 10 mA for signals that swing more than 0.5 V beyond the supply rails. |
| 3 | IN+ | input | Non-inverting input; the absolute maximum common-mode voltage for this device (not an NS/PS package) is (VCC-) - 0.5 V to (VCC+) + 0.5 V, and input current must be limited to 10 mA for signals that swing more than 0.5 V beyond the supply rails. |
| 4 | VCC- | power_in | Negative power supply; the total supply VS = (VCC+) - (VCC-) must be within 4.5 V to 40 V (±2.25 V to ±20 V), and VCC+ and VCC- need not have equal magnitude. |
| 5 | NC | unconnected | Not internally connected on the PDIP-8 (P) package; the datasheet lists no function for this pin. |
| 6 | OUT | output | Amplifier output; the datasheet rates output short-circuit to ground as continuous (per-amplifier, applies to the package). |
| 7 | VCC+ | power_in | Positive power supply; the total supply VS must stay within 4.5 V to 40 V recommended, with an absolute maximum of 42 V for this device (not an NS/PS package). |
| 8 | NC | unconnected | Not internally connected on the PDIP-8 (P) package; the datasheet lists no function for this pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | PDIP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
TL071IP - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: PDIP-8 (KiCad packages3D, STEP)
- 3D model files:
tl071ip-etched.step/tl071ip-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tl071ip.step/tl071ip.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (90 pp, sha256
ec4a201e6b0fe15d, retrieved 2026-10-08, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).