component
TL071IDR
Public Made by Adomby adom
Texas Instruments FET Input Amplifiers, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTL071IDR
Texas Instruments · FET Input Amplifiers · SOIC-8
TL071IDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connect - must not be used or connected to any signal. |
| 2 | IN- | input | Inverting input; input voltage range (VCC-) + 4 V to (VCC+) + 0.1 V; input bias current ±1 pA typical. |
| 3 | IN+ | input | Noninverting input; input voltage range (VCC-) + 4 V to (VCC+) + 0.1 V; input bias current ±1 pA typical. |
| 4 | VCC- | power_in | Negative power supply; recommended operating supply voltage (VCC+) - (VCC-) = 4.5 V to 40 V. |
| 5 | NC | unconnected | No connect - must not be used or connected to any signal. |
| 6 | OUT | output | Output; voltage swing headroom 115-210 mV from positive rail and 105-215 mV from negative rail at VS = 40 V and RL = 10 kΩ. |
| 7 | VCC+ | power_in | Positive power supply; recommended operating supply voltage (VCC+) - (VCC-) = 4.5 V to 40 V. |
| 8 | NC | unconnected | No connect - must not be used or connected to any signal. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
TL071IDR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
tl071idr-etched.step/tl071idr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tl071idr.step/tl071idr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (89 pp, sha256
13366ea85bacfe27, retrieved 2026-09-24, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).