component
TL071CDR
Public Made by Adomby adom
Texas Instruments FET InputAmplifiers, SOIC-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+116−8@@ -1,13 +1,126 @@ {+ "schema_version": 1,+ "type": "component", "slug": "tl071cdr",+ "title": "TL071CDR",+ "brief": "Texas Instruments FET InputAmplifiers, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "Texas Instruments FET InputAmplifiers, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "op-amp-cmp", "tl071cdr" ],+ "component": {+ "mpn": "TL071CDR",+ "manufacturer": "Texas Instruments",+ "package": "SOIC-8",+ "pin_count": 8,+ "category": "Op-amp/Cmp",+ "subcategory": "FET InputAmplifiers",+ "datasheet": "https://www.ti.com/lit/ds/symlink/tl071c.pdf",+ "parts": {+ "symbol": "tl071cdr.kicad_sym",+ "footprint": "tl071cdr.kicad_mod",+ "model_3d": "tl071cdr.glb",+ "model_3d_step": "tl071cdr.step",+ "lbr": "tl071cdr.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "OFFSET N1",+ "type": "passive",+ "description": "Offset null trim pin 1. Connect a potentiometer between OFFSET N1 (pin 1) and OFFSET N2 (pin 5) with the wiper tied to VCC- to trim the input offset voltage. Internal 1080 ohm resistors are tied here."+ },+ {+ "number": "2",+ "name": "IN-",+ "type": "input",+ "description": "Inverting op-amp input. JFET input stage provides very high input impedance (~10^12 ohm) and very low input bias current (~65 pA typ)."+ },+ {+ "number": "3",+ "name": "IN+",+ "type": "input",+ "description": "Non-inverting op-amp input. JFET input stage provides very high input impedance (~10^12 ohm) and very low input bias current (~65 pA typ). Common-mode range typically -12 V to +15 V on +/-15 V supplies."+ },+ {+ "number": "4",+ "name": "VCC-",+ "type": "power_in",+ "description": "Negative supply rail. Rated down to -18 V absolute maximum; typically operated at -15 V (dual supply) or GND (single supply)."+ },+ {+ "number": "5",+ "name": "OFFSET N2",+ "type": "passive",+ "description": "Offset null trim pin 2. Connect a potentiometer between OFFSET N1 (pin 1) and OFFSET N2 (pin 5) with the wiper tied to VCC- to trim the input offset voltage."+ },+ {+ "number": "6",+ "name": "OUT",+ "type": "output",+ "description": "Op-amp output. Short-circuit protected with unlimited short-circuit duration. Typical peak swing +/-13.5 V into 10 kOhm on +/-15 V supplies; unity-gain bandwidth 3 MHz, slew rate 13 V/us typ."+ },+ {+ "number": "7",+ "name": "VCC+",+ "type": "power_in",+ "description": "Positive supply rail. Rated up to +18 V absolute maximum; typically operated at +15 V (dual supply) or the single-supply rail. Supply current 1.4 mA typ."+ },+ {+ "number": "8",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection. Leave floating or tie to any convenient net."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://www.ti.com/lit/ds/symlink/tl071c.pdf",+ "pages": 36,+ "sha256": "13558f1741483f56",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "Texas Instruments",+ "Package": "SOIC-8",+ "Category": "Op-amp/Cmp",+ "Pins": "8"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "tl071cdr"+ ],+ "discovery_pitch": "TL071CDR (Texas Instruments) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +138,5 @@ "docs/tl071cdr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }