component
TL064CN
Public Made by Adomby adom
Texas Instruments FET Input Amplifiers, PDIP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTL064CN
Texas Instruments · FET Input Amplifiers · PDIP-14
TL064CN from Texas Instruments, in a PDIP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Output of amplifier 1; the output may be shorted to ground or either supply for an unlimited duration, provided the dissipation rating is not exceeded. |
| 2 | 1IN- | input | Inverting input of amplifier 1; the input voltage magnitude must never exceed the supply voltage magnitude or 15 V, whichever is less. |
| 3 | 1IN+ | input | Non-inverting input of amplifier 1; the input voltage magnitude must never exceed the supply voltage magnitude or 15 V, whichever is less, and common-mode voltage should stay between VCC- + 4 V and VCC+ - 4 V. |
| 4 | VCC+ | power_in | Positive supply voltage, recommended 5 V to 15 V, with an absolute maximum of 18 V. |
| 5 | 2IN+ | input | Non-inverting input of amplifier 2; the input voltage magnitude must never exceed the supply voltage magnitude or 15 V, whichever is less, and common-mode voltage should stay between VCC- + 4 V and VCC+ - 4 V. |
| 6 | 2IN- | input | Inverting input of amplifier 2; the input voltage magnitude must never exceed the supply voltage magnitude or 15 V, whichever is less. |
| 7 | 2OUT | output | Output of amplifier 2; the output may be shorted to ground or either supply for an unlimited duration, provided the dissipation rating is not exceeded. |
| 8 | 3OUT | output | Output of amplifier 3; the output may be shorted to ground or either supply for an unlimited duration, provided the dissipation rating is not exceeded. |
| 9 | 3IN- | input | Inverting input of amplifier 3; the input voltage magnitude must never exceed the supply voltage magnitude or 15 V, whichever is less. |
| 10 | 3IN+ | input | Non-inverting input of amplifier 3; the input voltage magnitude must never exceed the supply voltage magnitude or 15 V, whichever is less, and common-mode voltage should stay between VCC- + 4 V and VCC+ - 4 V. |
| 11 | VCC- | power_in | Negative supply voltage, recommended -5 V to -15 V, with an absolute maximum of -18 V. |
| 12 | 4IN+ | input | Non-inverting input of amplifier 4; the input voltage magnitude must never exceed the supply voltage magnitude or 15 V, whichever is less, and common-mode voltage should stay between VCC- + 4 V and VCC+ - 4 V. |
| 13 | 4IN- | input | Inverting input of amplifier 4; the input voltage magnitude must never exceed the supply voltage magnitude or 15 V, whichever is less. |
| 14 | 4OUT | output | Output of amplifier 4; the output may be shorted to ground or either supply for an unlimited duration, provided the dissipation rating is not exceeded. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | PDIP-14 |
| Category | Amplifiers/Comparators |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VIO | 3 | 15 | mV | VO = 0, RS = 50 Ω, TA = 25°C | 8 | |
| Input offset voltage (full range) | VIO | 20 | mV | VO = 0, RS = 50 Ω, TA = Full range | 8 | ||
| Input offset current | IIO | 5 | 200 | pA | VO = 0, TA = 25°C | 8 | |
| Input offset current (full range) | IIO | 5 | nA | VO = 0, TA = Full range | 8 | ||
| Input bias current | IIB | 30 | 400 | pA | VO = 0, TA = 25°C | 8 | |
| Input bias current (full range) | IIB | 10 | nA | VO = 0, TA = Full range | 8 | ||
| Maximum peak output voltage swing | VOM | 10 | 13.5 | V | RL = 10 kΩ, TA = 25°C | 8 | |
| Maximum peak output voltage swing (full range) | VOM | 10 | V | RL ≥ 10 kΩ, TA = Full range | 8 | ||
| Large-signal differential voltage amplification | AVD | 3 | 6 | V/mV | VO = ±10 V, RL ≥ 2 kΩ, TA = 25°C | 8 | |
| Large-signal differential voltage amplification (full range) | AVD | 3 | V/mV | VO = ±10 V, RL ≥ 2 kΩ, TA = Full range | 8 | ||
| Common-mode rejection ratio | CMRR | 70 | 86 | dB | VIC = VICRmin, VO = 0, RS = 50 Ω, TA = 25°C | 8 | |
| Supply-voltage rejection ratio | kSVR | 70 | 95 | dB | VCC = ±9 V to ±15 V, VO = 0, RS = 50 Ω, TA = 25°C | 8 | |
| Total power dissipation (each amplifier) | PD | 6 | 7.5 | mW | VO = 0, No load, TA = 25°C | 8 | |
| Supply current (each amplifier) | ICC | 200 | 250 | µA | VO = 0, No load, TA = 25°C | 8 | |
| Slew rate at unity gain | SR | 1.5 | 3.5 | V/μs | VI = 10 V, RL = 10 kΩ, CL = 100 pF, see Figure 7-1 | 10 | |
| Supply voltage (VCC+) | VCC+ | 5 | 15 | V | 6 | ||
| Supply voltage (VCC-) | VCC- | -15 | -5 | V | 6 | ||
| Ambient temperature, TL06xC | TA | 0 | 70 | °C | TL06xC | 6 | |
| Supply voltage (VCC+) | VCC+ | 18 | V | 6 | |||
| Supply voltage (VCC-) | VCC- | -18 | V | 6 | |||
| Differential input voltage | VID | -30 | 30 | V | Differential voltages at IN+ with respect to IN− | 6 | |
| Input voltage | VI | -15 | 15 | V | Magnitude must not exceed supply voltage or 15 V, whichever is less | 6 | |
| Operating virtual junction temperature | TJ | 150 | °C | 6 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 6 | ||
| Lead temperature (1.6 mm from case, 10 s) | 260 | °C | D, N, NS, P, PS, or PW package, 10 seconds | 6 | |||
| Junction-to-ambient thermal resistance | RθJA | 80 | °C/W | N (PDIP) 14 pins | 7 |
CAD (KiCad official)
- Symbol:
TL064CN - Footprint:
Package_DIP:DIP-14_W7.62mm - 3D model: PDIP-14 (KiCad packages3D, STEP)
- 3D model files:
tl064cn-etched.step/tl064cn-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tl064cn.step/tl064cn.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (58 pp, sha256
d40df8b50acce591, retrieved 2026-10-14, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).