component
TL064AD
Public Made by Adomby adom
Sungine FET Input Amplifiers, DIP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTL064AD
Sungine · FET Input Amplifiers · DIP-14
TL064AD from Sungine, in a DIP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Output1 | output | Output of amplifier 1, with output short-circuit protection and typical swing of ±14V. |
| 2 | IN1- | input | Inverting input of amplifier 1; differential input voltage limit is ±30V and input voltage range is ±15V. |
| 3 | IN1+ | input | Non-inverting input of amplifier 1; differential input voltage limit is ±30V and input voltage range is ±15V. |
| 4 | Vcc | power_in | Positive supply; total supply voltage VCC to VEE is rated at +36V maximum, with VCC=+15V in the electrical characteristics. |
| 5 | IN2+ | input | Non-inverting input of amplifier 2; differential input voltage limit is ±30V and input voltage range is ±15V. |
| 6 | IN2- | input | Inverting input of amplifier 2; differential input voltage limit is ±30V and input voltage range is ±15V. |
| 7 | Output2 | output | Output of amplifier 2, with output short-circuit protection and typical swing of ±14V. |
| 8 | Output3 | output | Output of amplifier 3, with output short-circuit protection and typical swing of ±14V. |
| 9 | IN3- | input | Inverting input of amplifier 3; differential input voltage limit is ±30V and input voltage range is ±15V. |
| 10 | IN3+ | input | Non-inverting input of amplifier 3; differential input voltage limit is ±30V and input voltage range is ±15V. |
| 11 | VEE | power_in | Negative supply; total supply voltage VCC to VEE is rated at +36V maximum, with VEE=-15V in the electrical characteristics. |
| 12 | IN4+ | input | Non-inverting input of amplifier 4; differential input voltage limit is ±30V and input voltage range is ±15V. |
| 13 | IN4- | input | Inverting input of amplifier 4; differential input voltage limit is ±30V and input voltage range is ±15V. |
| 14 | Output4 | output | Output of amplifier 4, with output short-circuit protection and typical swing of ±14V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Sungine |
| Package | DIP-14 |
| Category | Amplifiers/Comparators |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VIO | 3 | 6 | mV | RS=50, VO=0V, TA=25℃ | 2 | |
| Input offset voltage | VIO | 7.5 | mV | RS=50, VO=0V, TA=0℃~+70℃ | 2 | ||
| Input offset voltage average temperature coefficient | ΔVIO/ΔT | 10 | uV/℃ | RS=50, VO=0V | 2 | ||
| Input offset current | IIO | 5 | 100 | pA | VCM=0V, VO=0V, TA=25℃ | 2 | |
| Input offset current | IIO | 2 | nA | VCM=0V, VO=0V, TA=0℃~+70℃ | 2 | ||
| Input bias current | IIB | 30 | 200 | pA | VCM=0V, VO=0V, TA=25℃ | 2 | |
| Input bias current | IIB | 2 | nA | VCM=0V, VO=0V, TA=0℃~+70℃ | 2 | ||
| Input common-mode voltage range | VICR | -12 | 11.5 | V | TA=25℃ | 2 | |
| Large signal voltage gain | AVOL | 4 | V/mV | TA=0℃~+70℃ | 2 | ||
| Output voltage swing positive | VO+ | 10 | 14 | V | TA=25℃ | 2 | |
| Output voltage swing negative | VO- | -14 | -10 | V | TA=25℃ | 2 | |
| Common-mode rejection ratio | CMR | 80 | 84 | dB | RS=50, VCM=VICR min, VO=0V, TA=25℃ | 3 | |
| Power supply rejection ratio | PSR | 80 | 86 | dB | RS=50, VCM=0V, VO=0V, TA=25℃ | 3 | |
| Supply current (per amplifier) | ID | 200 | 250 | uA | No load, VO=0V, TA=25℃ | 3 | |
| Power dissipation (per amplifier) | PD | 6 | 7.5 | mW | No load, VO=0V, TA=25℃ | 3 | |
| Slew rate | SR | 2 | 6 | V/us | VIN=-10V~+10V, RL=10K, CL=100pF, AV=+1.0 | 3 | |
| Rise time | Tr | 0.1 | us | VIN=20mV, RL=10K, CL=100pF, AV=+1.0 | 3 | ||
| Overshoot | OS | 10 | % | VIN=20mV, RL=10K, CL=100pF, AV=+1.0 | 3 | ||
| Settling time | TS | 1.6 | us | AV=-1.0, 10mV, RL=10K, VO=0V~10V | 3 | ||
| Settling time | TS | 2.2 | us | AV=-1.0, 1.0mV, RL=10K, VO=0V~10V | 3 | ||
| Gain bandwidth product | GBW | 2 | MHz | f=200KHz | 3 | ||
| Equivalent input noise | EN | 47 | nV√Hz | RS=100, f=1.0KHz | 3 | ||
| Input impedance | RI | 1012 | W | 3 | |||
| Channel separation | CS | 120 | dB | f=10KHz | 3 | ||
| Supply voltage (VCC~VEE) | Vs | 36 | V | 2 | |||
| Input differential voltage | VIDR | -30 | 30 | V | 2 | ||
| Input voltage range | VIR | -15 | 15 | V | 2 | ||
| Junction temperature | TJ | 150 | ℃ | 2 | |||
| Storage temperature range | TSTG | -60 | 150 | ℃ | 2 |
CAD (KiCad official)
- Symbol:
TL064AD - Footprint:
Package_DIP:DIP-14_W7.62mm - 3D model: DIP-14 (KiCad packages3D, STEP)
- 3D model files:
tl064ad-etched.step/tl064ad-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tl064ad.step/tl064ad.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Sungine datasheet (10 pp, sha256
bf1604d9836a9970, retrieved 2026-10-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).