component
TL062CN
Public Made by Adomby adom
HGSEMI Operational Amplifier, DIP-8. Pinout reviewed by a person against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTL062CN
HGSEMI · Operational Amplifier · DIP-8
TL062CN from HGSEMI, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTPUT1 | output | Output of amplifier 1. |
| 2 | -INPUT1 | input | Inverting input of amplifier 1. |
| 3 | +INPUT1 | input | Non-inverting input of amplifier 1. |
| 4 | VEE | power_in | Negative supply (VEE) for both amplifiers; total supply VCC to VEE is +6 to +30V (±3V to ±15V) recommended, absolute max +5 to +36V. |
| 5 | +INPUT2 | input | Non-inverting input of amplifier 2. |
| 6 | -INPUT2 | input | Inverting input of amplifier 2. |
| 7 | OUTPUT2 | output | Output of amplifier 2. |
| 8 | VCC | power_in | Positive supply (VCC) for both amplifiers; total supply VCC to VEE is +6 to +30V (±3V to ±15V) recommended, absolute max +5 to +36V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | DIP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage (TA=25°C) | VIO | 3 | 15 | mV | RS=50Ω,VO=0V, TA=25℃ | 4 | |
| Input offset voltage (TA=0 to +70°C) | VIO | 20 | mV | RS=50Ω,VO=0V, TA=0℃ to +70℃ | 4 | ||
| Input offset current (TA=25°C) | IIO | 0.5 | 200 | pA | VCM=0V,VO=0V, TA=25℃ | 4 | |
| Input offset current (TA=0 to +70°C) | IIO | 2 | nA | VCM=0V,VO=0V, TA=0℃ to +70℃ | 4 | ||
| Input bias current (TA=25°C) | IIB | 3 | 200 | pA | VCM=0V,VO=0V, TA=25℃ | 4 | |
| Input bias current (TA=0 to +70°C) | IIB | 10 | nA | VCM=0V,VO=0V, TA=0℃ to +70℃ | 4 | ||
| Input common-mode voltage range (TA=25°C) | VICR | -11 | 14.5 | V | TA=25℃ | 4 | |
| Input common-mode voltage range (TA=0 to +70°C) | VICR | -12 | 11 | V | TA=0℃ to +70℃ | 4 | |
| Large-signal voltage gain (TA=25°C) | AVOL | 3 | 58 | V/mV | RL=10KΩ,VO=±10 V0, TA=25℃ | 4 | |
| Large-signal voltage gain (TA=0 to +70°C) | AVOL | 3 | V/mV | RL=10KΩ,VO=±10 V0, TA=0℃ to +70℃ | 4 | ||
| Output voltage swing positive (TA=25°C) | VO+ | 10 | 14 | V | RL=10KΩ,VID=10 V0, TA=25℃ | 4 | |
| Output voltage swing negative (TA=25°C) | VO- | -14 | -10 | V | RL=10KΩ,VID=10 V0, TA=25℃ | 4 | |
| Output voltage swing positive (TA=0 to +70°C) | VO+ | 10 | V | RL=10KΩ,VID=10 V0, TA=0℃ to +70℃ | 4 | ||
| Output voltage swing negative (TA=0 to +70°C) | VO- | -10 | V | RL=10KΩ,VID=10 V0, TA=0℃ to +70℃ | 4 | ||
| Common-mode rejection ratio | CMR | 70 | 84 | dB | RS=50Ω,VCM=VICR min,VO=0V, TA=25℃ | 4 | |
| Power supply rejection ratio | PSR | 70 | 86 | dB | RS=50Ω,VCM=0V,VO=0V, TA=25℃ | 4 | |
| Supply current per amplifier | ID | 200 | 250 | uA | 空载,VO=0V,TA=25℃ | 4 | |
| Total power dissipation per amplifier | PD | 6 | 7.5 | mW | 空载,VO=0V,TA=25℃ | 4 | |
| Slew rate | SR | 2 | 5 | V/uS | Vin=-10V to +10V,RL=10kΩ,CL=100pF,AV=+1.0 | 5 | |
| Settling time (to within 1.0 mV) | tS | 2.2 | uS | VCC=+15V,VEE=-15V,AV=+1.0,RL=10kΩ,VO=0V to +10V step, to within 1.0mV | 5 | ||
| Supply voltage (absolute maximum, VCC to VEE) | VS | 36 | V | Single supply +5 ~ +36V or dual ±2.5V ~ ±18V | 3 | ||
| Differential input voltage | VIDR | -30 | 30 | V | Note 2: referenced to inverting input | 3 | |
| Input voltage range | VIR | -15 | 15 | V | Notes 2 and 3; must not exceed supply voltage of 15 V, whichever is smaller | 3 | |
| Operating junction temperature | TJ | 125 | ℃ | 3 | |||
| Storage temperature range | Tstg | -60 | 150 | ℃ | 3 | ||
| Lead temperature (soldering) | TLEAD | 260 | ℃ | Soldering 10 s | 3 | ||
| Supply voltage (recommended, VCC to VEE) | VS | 6 | 30 | V | Single supply +6 ~ +30V or dual ±3V ~ ±15V | 3 | |
| Operating temperature (TL062C commercial grade) | TA | 0 | 70 | ℃ | TL062C | 3 |
CAD (KiCad official)
- Symbol:
TL062CN - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files:
tl062cn-etched.step/tl062cn-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tl062cn.step/tl062cn.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (15 pp, sha256
59c610b42a86c220, retrieved 2026-10-21, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).